Drilling Machine

Alzmetall Abomat 30

Condition: new, ALZMETALL pillar drilling machine drilling capacity in steel 30mm Short spindle MK3, spindle stroke: 140mm, throat: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 132/724mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1790mm, net weight: 260 kg. - Speed infinitely variable 100-1800 rpm Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP, reversing switch for clockwise and anti-clockwise rotation, motor protection switch, speed adjustment stepless, speed display digital, protection class IP54, spindle protection with electrical fuse, painting: DD-structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein Qvaot

Condition: excellent (used), Year of construction: 1996, bore capacity in steel (diameter) 40 mm arm length 1400 mm workpiece height max. 900 mm turning speed range 56 - 2500 U/min feeds 0,15-0,2-0,3-0,36 mm/U bore capacity in cast iron 50 mm thread capacity M 30 in Stahl main drive 3 kW stroke drive 0,75 kW voltage 380 V / 50 Hz Boluexkkuli total power requirement 3,75 kW weight of the machine ca. 1,75 t dimensions of the machine ca. 2,5 x 1,0 x 2,6 m • cube table 560 x 460 x 500 mm

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication E8Mdsttn - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: excellent (used), Year of construction: 1988, Alzmetall AB 30/R-1000 radial drilling machine with 3,0 kW motor Manufacturer: Alzmetall Type: AB 30/R-1000 Condition: used, very good Year of manufacture: 1988 Drilling capacity steel E335 (St 60) 40 mm Drilling capacity cast iron EN-GJL-200 50 mm Thread cutting (St60)* M 30 Thread cutting in cast iron (EN-GJL-200)* M 42 Short spindle MK 4 / MT 4 Stroke motor 0.75 kW 4 feeds 0.15-0.2-0.3-0.36 mm/rev Spindle stroke 160 mm* throat 1000 mm Drive Manual gearbox Motor: n = 1500 min-1 3.0 kw kW 12 Spindle speeds 56 / 80 / 112 / 160 / 224 315 / 450 / 630 / 900 / 1250 / 1800 / 2500 Standard equipment - Electromagnetic feed clutch with overload protection and electric handle cross switching - Clockwise rotation through contactor control - incl. motor protection switch for drive and lift motor - Base plate with T-slots - Protection class IP 54 Special equipment. - Machine light - Thread cutting device - Coolant system - Electrically controlled free-cutting device - Drilling depth fine adjustment and fixed stop - 2 x cube table 630 x 800 x 500 Bsnm0Jyznyi - Central clamping for drilling slide and boom mechanical and for column pneumatic

Year of construction: 1984, Condition: used, weight 1,4 t Fi7R98Wbvz

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm Cz3Evjmbcm turning speeds 225 - 4300 U/min engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Dpn7Vn Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Condition: new, bore capacity in steel (diameter) 30 mm throat 293 mm bore stroke 140 mm spindle taper MT 3 column diameter 115 mm table surface area 514 x 360 mm spindle turning speed - stepless 225 - 4300 U/min Cb9Xpjgscs total power requirement 1,0 / 1,6 kW weight of the machine ca. 260 kg dimensions of the machine ca. H: 1790 mm

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Bq0Linyxmi Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Dpsnqh Cast iron EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 132/724 mm Manual feed Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive stepless Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display Dpkfmv * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Year of construction: 2023, Condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill drilling capacity in steel 12mm Drill chuck mounting B16 outer taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 110/250, feed by hand, machine height without options: 670mm, net weight: 64 kg. Sonpkwyd - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in display, machine status indicators and warnings in display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint finish: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 20/30 mm throat 293 mm bore stroke 120 mm speeds 10 / 125-1600 U/min spindle taper MK 3 table-size 300 x 300 mm table width 415 mm total power requirement 0,5 / 0,7 kW weight of the machine ca. 200 kg dimensions of the machine ca. 0,42 x 0,9 x 1,79 m 10 speeds switchable via pulley and pole-changing motor. Dqxosd Machine dealer with own stock of 2500 m².

Condition: used, Sliding table (is / was mounted on a 50 mm MAXION drilling machine . Dimensions approx. 1400 x 700 mm Clamping surface 1200 x 600 mm Longitudinal movement 600 mm . 3 T-slots, distance 150 mmm S7Naraziq . with screwed-on splash plates .

Condition: good (used), Year of construction: 2002, 1 used pillar drilling machine Make Alzmetall Type AX 3 SV Year of manufacture 2002 Drilling capacity in St 60 40 mm Dqwxtx Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Spindle speeds - continuously variable 160-2250 rpm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table - usable support 515x360 mm Distance spindle / table min./max. 117/701 mm T-slots number - width - distance 2 x 14 x 224 mm Feed rate 0.1 + 0.2 mm/rev Machine height 1840 mm Equipped with: Thread cutting device Mushroom push button (latching) for EMERGENCY STOP Infinitely variable speed adjustment Technical data Errors excepted

Year of construction: 1999, Condition: excellent (used), Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Csmzn2Ubxv Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: excellent (used), Catalog number 6726 TECHNICAL SPECIFICATIONS - hopper inlet 280x300mm - outlet for shredded wood fi 310mm - working width of rotor 340mm - main motor 22kW - number of knives 6pcs - dimensions L/W/H 1300x1150x1680mm - weight 720kg ATTRIBUTES - very good condition - used chipper Net price: 19900 PLN Net price: 4520 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with greater fluctuations in the exchange rate, the price may change) Celk7Skf29

Condition: new, Year of construction: 2024, ALZMETALL column drilling machine AB 34 iTRONIC drilling capacity in steel 34mm, spindle speed: 100-1800 rpm, Short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable support: 615x430mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min. / max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: 7" TFT LCD display with touch function Thread cutting device Infinitely variable speed adjustment Spindle protection Three separate buttons for clockwise rotation - counterclockwise rotation - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 Volt Cg0Hvjlldt Protection class IP 54 Motor insulation class "F" (155°) Electromagnetic feed overload protection Machine oil initial filling Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light Pos. 12. Coolant system A Pos. 24 Foot switch for thread cutting Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be viewed at our premises by prior arrangement.

Condition: excellent (used), Year of construction: 2021, operating hours: 5,650 h, Functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (max.): 18,000 rpm, coolant supply: 50 bar, Highly dynamic 5-axis machining center with extensive equipment Pallet changer Indunorm UL300/ 2 pallet sizes possible Serviced Current switch-on times: Program ON: 5,649h / Spindle ON: 5,272h Travel paths and speeds: X-axis (longitudinal): 660 mm Y-axis (transverse): 800 mm Z-axis (vertical): 550 mm A-axis with double Tourque drive: +140°/-140° C-axis with Tourque drive: 360° / resolution 0.0001 C-axis speed: 50 rpm Feed rate in all axes: 75,000 mm/min Dqwdkl Clamping table: Dimensions: DM470 mm with attached zero point system type Parotec: 356 mm x 356 mm Table load: 500 kg Control: Heidenhain TNC640 Spindle: Speed range: 50 – 18,000 rpm Tool holder: HSK63 Spindle power: 26 kW (S6) Torque: 116 Nm (S6) Coolant system and chip disposal: Coolant outside with 3 nozzles: 7 bar Coolant inside: 50 bar Air outside Air inside Paper belt filter Chip conveyor Bed flushing Automatic tool changer: Tool holder: HSK63 Number of places: 76 with 2 levels Dimensions and weight: (without automation) Dimensions: width 3,900 mm x depth 4,200 mm x height 3,200 mm Weight: 11,000 kg Indunorm automation system: Automatic displacement axis to allow free access to the machine Pallet size 1 for automation: 6 pieces 398 mm x 398 mm Preset pallet for Erowa ITS: 1 piece 398 mm x 398 mm Pallet size 2 for automation: (selectable) 16 pieces Erowa ITS148 mm Pallet size 3 for automation: (alternatively selectable) 32 pieces Erowa ITS50 mm Transfer weight including pallet: 300 kg Crane loading possible Other equipment and accessories: Electrical handwheel HR510 Kinenatic Opt 5-axis compensation Heidenhain infrared sensor TS640 Preparation for oil mist extraction Blum tool measurement with laser Work area flushing Interior camera UYAR including screen Hand flushing gun Automatic roof section for crane loading 6 pieces Parotec pallets 398 mm x 398 mm 1 piece Pre-Palette Parotec for Erowa ITS 398 mm x 398 mm Machine documentation

Condition: used, bore capacity in steel (diameter) 28 mm throat 285 mm bore stroke 150 mm Column diameter 130 mm table-size 620 x 470 mm spindle turning speed - stepless 110-2900 U/min spindle taper MK 3 feed 0,1 / 0,2 / 0,3 mm/U. Drive 1,47 kW Dqv9O7 weight of the machine ca. 380 kg dimensions of the machine ca. 0,85 x 0,6 x 1,8 m Machine with infinitely variable speed control, 2-stage gearbox, aut. feed and base plate with flutes.

Condition: reconditioned (used), Year of construction: 1992, bore capacity in steel (diameter) 40 mm throat 360 mm bore stroke 190 mm spindle taper MT 4 Oucdl3Fv0 table-size 710 x 560 mm spindle turning speed - stepless 50 - 1.280 U/min feed range - boring 0,09 / 0,12 / 0,18 / 0,22 mm/U coolant voltage 400 V total power requirement 585 + 140 (Tisch) kW weight of the machine ca. 630 kg dimensions of the machine ca. 0,80 x 1,30 x 1,95 m - Serial No.: 19917 - incl. sliding cross table 760 x 425 mm with clamping surface 600 x 325 mm sliding movement 400 x 200 mm (new price currently 7.294,-- EUR + VAT) - thread cutting device - autom. vertical feed - continously variable speed adjustment - foot switch - coolant equipment - integrated machine light

Condition: excellent (used), ALZMETALL AB 26 SV built in 2014 This machine has a CE marking and complies with the Machinery Directive!!!!! Drilling capacity steel E335 (St 60) [mm] 26 Short spindle MK 3 Throw [mm] 293 Support surface machine table [mm] 400 x 300 Distance spindle-table min./max. [mm] 90 / 675 Column diameter [mm] 115 Spindle stroke [mm] 160 Feed (mm/rev) 0.1 / 0.2 / 0.3 / 0.4 Slcjcgmdu Power [KW] 0.5 / 1.5 Motor 1 [min-1] 750 / 1500 Spindle speed | Option 1 [RPM-1] 80 – 2,200 Touchscreen No Table load 100 kg Machine weight 520 kg The machine can be inspected and tested on site by prior appointment.

Condition: good (used), Year of construction: 2010, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Bn3Za3M8Ynw

Year of construction: 2022, Condition: new, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 C0Tus3H200 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Year of construction: 2024, Condition: new, ALZMETALL column drilling machine AX 3s iTRONIC drilling capacity in steel (St60) 30mm, spindle speed: 225-4300 rpm, Short spindle MK3, spindle stroke: 140mm, throat depth: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min. / max. 132/724mm, machine table height adjustment via hand crank, manual feed, machine height without options: 1790mm, net weight: 260 kg. Standard equipment: Cg0Imrhb8B 7" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status indicators and warnings in the display, Service information, Selectable operating language: DE/EN/FR/ES/IT/NL/RU Thread cutting device, for thread cutting with stop, max. max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT-LCD display (4 tools), Infinitely variable speed adjustment via adjustment lever Spindle protection with electrical fuse Three separate buttons for clockwise rotation - anticlockwise rotation - stop Mushroom pushbutton (latching) for EMERGENCY STOP Main switch, lockable Clockwise and counter-clockwise rotation via contactor control Control voltage 24 Volt Protection class IP 54 Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: -LED machine light pos. 12. -Technology calculator in the display Pos. 37.5 Delivery time: ex warehouse Waiblingen Beinstein The machine can be viewed at our premises by prior arrangement.