Heat-resistant gloves ActivArmr® - 12 pairs

ANSELL

Condition: used, Chemical protection glove AlphaTec 58-430, size 10, green/grey, EN 388, EN 374, EN 1149, ANSELL * According to EN 388 * EN 374 * Category III * Material: Cotton velour with nitrile coating * Ansell Grip Technology® Kdjdpfo Aaf Ibsx Ag Aeu * Optimally controlled wet and oil grip * Low force required for gripping * Flexibility and finger dexterity * Close fit, ensuring a secure fit * Protection against bases, oils, fuels, and some solvents, greases, and animal fats * Suitable for medium-level loads * Excellent protection against cuts, punctures, and abrasions * Silicone-free * Antistatic, according to EN 1149 * AQL: 0.65 * Application: Chemical processing, petrochemical industry, handling of paints, printing inks, dyes, adhesives, rubber and rubber additives, handling of fluid-treated metal parts, maintenance of industrial tools, disposal of used oil, waste and water treatment * Other technical characteristics: Category: III * Abrasion resistance: 3 * Tear resistance: 0 * Puncture resistance: 1 * Cut resistance (cut test): 0 * Design: antistatic, protective cuff * Standard: EN 388, EN 374, EN 1149

Condition: used, AlphaTec Sol-Vex 37-900 chemical-resistant glove, size 8, red, EN 388, EN 374, ISO 9001 · Complies with EN 388 · EN 374 · Category III · Material: Nitrile, velourized · Diamond finish · High abrasion resistance · Excellent chemical resistance · Abrasion and puncture resistance · Each glove is individually tested for leaks and other damage using air pressure before delivery · Antistatic · Certified according to ISO 9001 Kdsdpfx Age Aaftdo Aou · Application: Refining, laboratory analysis, printing industry, cleaning, highly hazardous chemical areas, e.g., chemical processing, handling of corrosive chemicals and chemical mixtures · Other technical properties: Category III · Abrasion resistance: 4 · Tear resistance: 0 · Puncture resistance: 1 · Cut resistance (cut test): 1 · Design: Straight cuff · Thickness approx.: 0.425 mm · Standard: EN 388, EN 374, ISO 9001

Condition: used, AlphaTec® 39-122 chemical-resistant glove, size 9, green, EN 388, EN 374, EN 407, ANSELL · According to EN 388 · EN 374 · EN 407 · Category III Kdodo Aad Adepfx Ag Aou · Material: Interlock cotton with nitrile coating · Roughened finish · Effective protection against high mechanical risks and chemicals · Optimal wearing comfort · Robust and anatomically shaped glove · Excellent dexterity · Antistatic · Very good wet and dry grip · Application: Maintenance work, pre-assembly, refueling, degreasing, metal production, chemical processing, agricultural chemicals · Other technical properties: Category: III · Abrasion resistance: 4 · Tear resistance: 1 · Puncture resistance: 1 · Cut resistance (cut test): 1 · Finish: Roughened finish · Contact heat resistance: Level 1 · Standard: EN 388, EN 374, EN 407

Condition: used, Cold-resistant gloves ActivArmr® 80-400, size 9, yellow/blue, EN 388, EN 511, EN 407 · According to EN 388 · EN 511 · EN 407 · Category III · Material: Acrylic knitted fabric with natural rubber latex coating · Palm coated · Knitted cuff · Excellent cold insulation · High level of comfort · Excellent grip · Effective protection against cold down to approximately -30 °C with short-term contact · Very good visibility in poor lighting conditions Kjdpfxs Aac N Aj Ag Aodu · Application: Goods receiving and shipping, waste disposal, freezer and refrigerated areas, storage of perishable goods, public works, outdoor construction work · Other technical properties: Abrasion resistance: 2 · Tear resistance: 3 · Puncture resistance: 1 · Cut resistance (cut test): 2 · Design: Knitted cuff, cold insulation · Standard: EN 388, EN 511, EN 407

Condition: used, Chemical-resistant glove AlphaTec 58-270, size 9, green/grey, EN 388, EN 374, EN 1149 * According to EN 388 * EN 374 * Category III * Material: Nylon with nitrile coating Kdjdpfxe Aac Apj Ag Asu * Ansell Grip Technology® * For chemical work with light to medium loads * Optimal grip safety * Wearing comfort * Finger dexterity * Excellent tactile sensitivity and flexibility * Minimal heat build-up, resulting in reduced sweat formation * Liquid-tight * Antistatic according to EN 1149 * Application: Maintenance work, light assembly in chemical environments, chemical processing, work with oily and greasy objects and materials, refining, handling of paints, printing inks, dyes, adhesives, and glues * Other technical features: Category III * Abrasion resistance: 3 * Tear resistance: 3 * Puncture resistance: 1 * Cut resistance (cut test): 1 * Design: antistatic, protective cuff * Standard: EN 388, EN 374, EN 1149

Condition: used, AlphaTec 58-435 chemical protection glove, size 10, sea green/anthracite gray, EN 388, EN 374, EN 1149, ANSELL · According to EN 388 · EN 374 · Category III · Material: Cotton velour with nitrile coating · Ansell Grip Technology® Kdjdpfx Agoz U Dx Ao Asu · Optimally controlled wet and oil grip · Low force required for gripping · Flexibility and finger dexterity · Close fit for a secure hold · Protection against hydrocarbon derivatives, alcohol-based substances, numerous solvents and esters · Suitable for high loads · Excellent protection against cuts, punctures and abrasions · Fold-over barrier on the cuff prevents dripping onto the forearms · Silicone-free · Antistatic according to EN 1149 · AQL: 0.65 · Application: Chemical processing, petrochemical industry, handling of paints, printing inks, dyes, adhesives and sealants, rubber and rubber additives, handling of fluid-treated metal parts, maintenance of industrial tools, disposal of used oil, waste and water treatment · Further technical properties Category: III · Abrasion resistance: 4 · Tear resistance: 0 · Puncture resistance: 1 · Cut resistance (cut test): 0 · Design: antistatic, protective cuff · Standard: EN 388, EN 374, EN 1149

Condition: used, AlphaTec® 62-201 chemical-resistant glove, size 9, blue, EN 388, EN 374, EN 407, ANSELL · According to EN 388 · EN 407 · EN 374 · Category III · Material: Nylon with natural rubber latex coating · Smooth finish · Seamless liner for increased comfort · High flexibility · Excellent finger dexterity · Very good abrasion and tear resistance · Allows for brief contact up to 100 °C · Application: Handling of food, preparation, processing and handling of food, building management, detergents and cleaning liquids · Other technical properties: Category: III · Abrasion resistance: 3 · Tear resistance: 3 · Puncture resistance: 1 Kdedpjz Uwd Esfx Ag Aeu · Cut resistance (cut test): 1 · Finish: smooth finish · Thickness approx.: 1.20 mm · Heat protection max.: Contact heat up to 100 °C · Contact heat resistance: Level 1 · Standard: EN 388, EN 374, EN 407

Condition: used, Cold-resistant gloves ActivArmr® 80-400, size 10, yellow/blue, EN 388, EN 511, EN 407 · According to EN 388 · EN 511 · EN 407 · Category III · Material: Acrylic knit fabric with natural rubber latex coating · Palm coated · Knitted cuff · Excellent cold insulation · High level of comfort · Excellent grip · Effective protection against cold down to approximately -30 °C with short-term contact · Very good visibility in poor lighting conditions · Application: Goods receiving and dispatch, waste disposal, frozen and refrigerated areas, storage of perishable goods, public works, outdoor construction work · Other technical properties: Abrasion resistance: 2 · Tear resistance: 3 · Puncture resistance: 1 · Cut resistance (cut test): 2 · Design: Knitted cuff, cold insulation Kdedpoz Uv N Hofx Ag Asu · Standard: EN 388, EN 511, EN 407

Condition: used, Chemical-resistant glove AlphaTec® 39-122, size 8, green, EN 388, EN 374, EN 407, ANSELL · Complies with EN 388 · EN 374 · EN 407 · Category III · Material: Interlock cotton with nitrile coating · Roughened finish · Effective protection against high mechanical risks and chemicals · Optimal wearing comfort · Robust and anatomically shaped glove · Excellent dexterity · Antistatic Kdsdpfx Aez Um R Ujg Aeu · Very good wet and dry grip · Applications: Maintenance work, pre-assembly, refueling, degreasing, metal manufacturing, chemical processing, agricultural chemicals · Further technical properties, category: III · Abrasion resistance: 4 · Tear resistance: 1 · Puncture resistance: 1 · Cut resistance (cut test): 1 · Finish: Roughened finish · Contact heat resistance: Level 1 · Standard: EN 388, EN 374, EN 407

Condition: used, Chemical-resistant glove AlphaTec 58-270, size 10, green/grey, EN 388, EN 374, EN 1149 · According to EN 388 · EN 374 · Category III · Material: Nylon with nitrile coating · Ansell Grip Technology® · For chemical work with light to medium loads · Optimal grip · Comfortable to wear · Finger dexterity Kdedoz Ul Huepfx Ag Asu · Excellent tactile sensitivity and flexibility · Minimal heat build-up, resulting in reduced sweat formation · Liquid-tight · Antistatic according to EN 1149 · Application: Maintenance work, light assembly in chemical environments, chemical processing, work with oily and greasy objects and materials, refining, handling of paints, printing inks, dyes, adhesives and glues · Other technical properties, category: III · Abrasion resistance: 3 · Tear resistance: 3 · Puncture resistance: 1 · Cut resistance (cut test): 1 · Design: antistatic, protective cuff · Standard: EN 388, EN 374, EN 1149