Press brake

ATLANTIC HPE 40400

Year of construction: 2000, Condition: used, pressure 230 t chamfer lenght 5000 mm distance between columns 4050 mm 800 mm 500 mm 300 mm 600 mm BC 45 Grafik 18,7 kW 22,0 t Lhsloh Dxw Ushcdw Ded 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: Lhelhcdweu Icpce Dsd - 1 set (2 pieces) shearing blades *

Condition: used, Year of construction: 1993, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 6.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 - 17 Hub/min back stop - adjustable max. 1000 mm Control konv. work height max. 930 mm engine output 22.0 kW weight 8000 kg range L-W-H 4150 x 2020 x 2240 mm Lhslhcdet Smfzow Djd Equipment: - electro-hydraulic / slide-guided sheet metal shears - front control panel, pivoting - front left - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, adjustable from behind - electro-motorized rear stop 10-1000 mm * 2x stable guide arms (with guides and drive spindle) * stop rail adjustable in parallel * with analog position display + handwheel for fine adjustment * display on a counter up to 0.1 mm - 1x side stop - 1x freely movable foot switch - front finger guard - operating instructions (PDF)

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min Lhslhcdwju Uu Sms Dod back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Lhslhcju Uwyyjdw Djd Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: good (used), Year of construction: 2016, Functionality: fully functional, We request your binding offer. Technical specifications: • Machine is functional, assembled, and ready to test. • UV printing system with two OMEGA 36i high-end UV inkjet printing modules and Piezo DoD technology, including rotary encoder, software dongle, two SmartCure Air LED-based UV curing units, air-cooled UV LED drying technology, and a 19" industrial PC version for the Basix minicontroller. Available from: immediately Delivery terms: ex works (Brandenburg) Payment terms: Payment before pickup. Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site. Lelhcdjv Iy U Sew Djhd

Condition: good (used), Year of construction: 2004, card printing machine Lslop R Nrxshcdw Dshd

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: -with side stop L: 1000 x W: 100 x H: 60 mm and stop bar 990 mm, with 8 supports -Operation via control panel and foot control -Cutting zone lighting -stroke counter * Lelju Rni Hshcdw Dohd

Condition: used, Year of construction: 2001, pressure 100 t chamfer lenght 3100 mm distance between columns 2600 mm stroke of upper beam 120 mm throat 250 mm dayligth 325 mm working feed 7.0 mm/sec return speed 60.0 mm/sec 220 bar Control ATL 550 work height max. 875 mm total power requirement 5.6 kW weight 7400 kg range L-W-H 3500 x 1700 x 2240 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - simple NC-controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back stop (X) * Positioning of the depth setting (Y1 + Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * swiveling control panel, front left - electro-motor, stepless depth adjustment (Y1 + Y2 axis) - electro-motor back stop (X axis) Ljlhcdev H Enuew Dshd * 2x manually adjustable stop fingers - manual table cambering, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotatable MULTI V die block (lower tool) - side protection device (swivelling doors) - 1x freely movable 2-hand / foot control - 2x front, stable material support arms - Operating instructions (PDF)

Condition: used, Year of construction: 1997, sheet width 3050 mm plate thickness 6 mm distance between columns 3100 mm Lhjlhcsvh Naksdw Dsd back stop - adjustable 750 mm cutting angle adjustment 0,5 - 3,0 ° no. of strokes 9 - 17 Hub/min table height over floor 775 mm total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 6 mm distance between columns 3460 mm table height 800 mm 0 220 bar Lslhcjvxwmyedw Dshd cutting angle adjustment 0,5x3 ° down holder 18 back stop - adjustable 750 mm front stop - adjustable 1000 mm main drive 7,5 kW oil volume 300 l total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Lholhcdwjvy H Iie Ded Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, total height: 2,800 mm, back gauge travel distance Z-axis: 750 mm, pressing force: 175 t, total width: 2,300 mm, total length: 3,400 mm, throat depth: 300 mm, overall weight: 11,000 kg, operating speed: 200 mm/s, distance between stands: 2,600 mm, bending length: 3,100 mm, throat depth of stand: 300 mm, type of input current: three-phase, input voltage: 400 V, Hydraulically controlled press brake ATLANTIC HPT 175/30, control ATL 550, split block die and punch, max. pressing pressure 175 tons, controlled stop, max. operating pressure 235 bar, motor power 15 kW, weight approx. 11 tons, Lolhcdwovyr Ius Djhd

Condition: good (used), Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch Lhslhcofpidiodw Dod -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

Condition: used, Year of construction: 1992, sheet width 3050 mm plate thickness 6.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable 750 mm Control SC7p engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm from a maintenance workshop well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front Ljlhcdweriiqdo Dehd - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: ?machineno=1008-9325328

Condition: good (used), Year of construction: 1989, machine/vehicle number: 56183, Offer 24273 Technical data: Lslot Algrohcdw Dshd - Pressure capacity 135 t - Working width 3100 mm - Clearance between the uprights 2600 mm - Table width 180 mm - Projection 200 mm - Installation height 310 mm - Infeed speed 50 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3300 x H 2300 x D 1600 mm - Weight approx. 7500 kg - with: - Adjustment of pressing depth + pressing pressure - Motorized backgauge with handwheel fine adjustment - 4-fold universal die - pointing tool + various tools - Two-hand control panel, foot switch

Year of construction: 1989, Condition: good (used), machine/vehicle number: 56089, Pressure: 135 t Working width: 4100 mm Clear distance between columns: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Lelhcdonzhvkjw Dohd Working speed: 7 mm/sec Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Weight: 10.8 tons Required space: 4250 x 1800 x 2400 mm

Condition: not inspected (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: Serie Nr. 56282, total height: 2,400 mm, total width: 1,800 mm, total length: 4,000 mm, overall weight: 8,500 kg, Equipment: type plate available, ATLANTIC HPA 30-135 / Good condition -Pressure force 135 tons Lelou Ni Izshcdw Dohd -folding length 3050mm -Clearance between the uprights 2550mm -Motorized height adjustment -automatic backgauge -Foot switch / hand switch -ready for demonstration under power

Condition: good (used), Year of construction: 1997, Functionality: fully functional, total height: 2,280 mm, back gauge: 500 mm, installation height: 325 mm, pressing force: 135 t, total width: 1,700 mm, total length: 3,500 mm, throat depth: 250 mm, overall weight: 7,800 kg, distance between stands: 2,600 mm, bending length: 3,000 mm, We are selling a hydraulic press brake with the following equipment Upper tool and lower tool complete motorized back gauge Lolhcjvi I Snedw Djhd motorized adjustment of immersion depth 2 support arms Two-hand operation and foot switch

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: CDL 184, Atlantic Zeiser Card Line - CDL 184 machine for card personalization. It is configured with following components: Kora Packmat card feeder with extension belt Videojet BX 6500 Hi Speed ink jet printer Camera for personalization verification Lhjleuv E Hgjhcdw Ded Hot stamping module Labeler for scratch off labels Camera for scratch field verification Reject bin Exit conveyer The Machine can print cards in ISO size 85x 54mm and in 85x133mm Multi Pin cards also Product samples shown In working condition, can be seen in production

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm Equipment: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selected positioning from the back stop * Digital display of the actual value * electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the back stop * programmable cutting length limitation * EMERGENCY OFF switch - NC electro-motorized back stop, on ball screws - manual cutting gap adjustment, adjustable from the front - finger protection at the front - 1x side stop .. 1,000 mm - 2x front support arms - protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - original operating instructions Ljlhcdwevx Uw Aj Dshd

Year of construction: 1992, Condition: good (used), machine/vehicle number: 92063963, Offer 22588 Loloipmi Uohcdw Dshd Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - cutting angle adjustable mot. 0,5 - 3 °. - cutting gap adjustment by hand - number of hydraulic hold-downs 18 pcs - mot. backgauge 10 - 750 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - hydraulic drive 400 V / 7,5 kW - table height 770 mm - Space requirement incl. backgauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - weight approx. 4500 kg - with: - E. - foot - switch - cutting line lighting

Condition: good (used), Year of construction: 1997, Functionality: fully functional, back gauge: 750 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,000 mm, overall weight: 5,000 kg, A pair of guillotine shears in good condition from the manufacturer Haco/Atlantik is for sale Equipment as follows: motorized backgauge hydraulic cutting angle adjustment The cutting gap is adjusted manually from the center. 3 support arms Lheljvi I A Hshcdw Ded

Condition: used, Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Lelhcdweuqdnke Dehd Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3500 mm well-maintained condition (!!) - in checked condition - machine video - youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min Ljlhcjt Tw Uiodw Dehd - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille