Compressor

Atlas Copco GA37

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 442.2 m³/h, pressure (max.): 12.8 bar, type of cooling: air, Equipment: refrigerant dryer, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW 12.80 bar Psdey Rva Ijpfx Amxsgt 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Pgodpfoutni Rex Amxst Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request. Pgodpfxjzzptte Amxet

Year of construction: 2005, condition: ready for operation (used), A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible. Psdpfx Amsyq R Ewoxjgt

Condition: reconditioned (used), Year of construction: 2004, warranty duration: 6 months, Automatic bun divider Mini Rex 4000 - used - year of manufacture 2004 - weight range 30-135 g - maximum output 4,000 pieces/hour - electronic control Pgsdpfx Amezgr I Djxjt - power supply 3 x 400 V - recently refurbished - 6-month warranty - pick-up from warehouse / shipping option available - price on request

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Pgsdpfx Amezpxnvsxet Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Pgedpswlp Hdjfx Amxjt Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Pgjdpfx Amewbf U Noxet

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Pgodpszf Afqsfx Amxst Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: API502813, overall weight: 970 kg, volume flow: 280.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 YEAR: 2005 CAPACITY (kW): 37 OUTPUT (m3/min): 4.5 CIS (bar): 13 HRS (DOC/GENERAL): 95183 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED (AIR/WATER): air ON THE TANK: no Pgsdpfx Aev Hqkusmxot DOCUMENTS: no CONNECTION: 2' and 1 1/2' S014585

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Pedpoy Nk Haofx Amxsgt Web guide Year 2018

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours Pedpfx Amst Hdh Nexegt The compressor is fully functional.

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no Pgsdpsrz Rtbofx Amxjt NEW/USED - USED

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Pgodpst A Uyuofx Amxot Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: good (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 292.2 m³/h, pressure (max.): 13 bar, Equipment: type plate available, S014584 PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API509425 YEAR - 2006 Podpfxsrt U Spj Amxjgt POWER (kW) - 37 OUTPUT. (m3/min) - 4.87 CIS (bar) - 13