Hammer

Atlas Copco TEX 10

Condition: used, Functionality: unexamined, power: 75 kW (101.97 HP), Year of construction: 1987, operating hours: 83,881 h, machine/vehicle number: ARP871261, GA375 is a stationary, single-stage, oil-injected screw compressor with electric motor drive. The compressor is soundproofed and fully piped and wired internally. An electronic control module and a start module are housed in the front panel and behind it is the control cabinet with the starter device. Pressure build-up up to 10 bar. 89Bbj09Ve Operating instructions available.

Condition: new, feed pressure 10 bar Effective free air delivery 252 L/min Dqt97P Receiver capacity 90 l / bar Number of cylinders 1 Stk. motor 400Volt / 1,5KW V / KW turning speeds 777 U/min weight of the machine ca. 70 kg. range L-W-H 0,97 x 0,5 x 0,9 mm

Year of construction: 2019, Condition: new, Weight: 25 kg Eyzjreav Air demand: 15,5 l/s Impact frequency: 870 bpm Shaft size: 32 x 160 mm

Condition: used, Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling Bcavd2Zxj9 -Dimensions: 480/400/H530 mm -Weight: 32 kg

Condition: excellent (used), operating hours: 15,174 h, Screw compressor Berko BR 42-10 (air end Atlas Copco) with desiccant dryer Berko BSP-MT 500, refrigeration dryer BFA 372 and other air treatment equipment. Everything is working and in very good condition. This set was used as an equipment for medical air. After oil and filters maintenance, redy to work for next 3000 hrs till next maintenance. Bmfrxcgou7M

Condition: used, Year of construction: 2001, ATLAS COPCO GA110 SCREW COMPRESSOR D7V79Ec

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: AIF041591, overall weight: 3,500 kg, volume flow: 1,188 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: ATLAS COPCO GA110 SN: AIF041591 YEAR: 1997 CAPACITY: (kW) 110 OUTPUT: (m3min) 19.8 CIS: (bar) 10 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED: (AIR) air Bm83Hol273 ON THE TANK: no DOCUMENTS: no CONNECTION: 2 1/2 NEW/USED: USED S013877

Condition: used, Year of construction: 2014, operating hours: 4,717 h, fuel type: diesel, motor manufacturer: Perkins, Field of application: Construction Empty weight: 2.140 kg Generator capacity: 100 kVA Bjd9Ihwfgg Please contact Sales Department for more information

Condition: used, ETVS7 30 B10 CTADS + 4220 0982 05, Atlas Copco electric corded screwdriver Model: ETVS7-30-B10-CTADS Condition: Used Bjq9F9Lspig

Condition: like new (used), Year of construction: 2020, operating hours: 14,789 h, Functionality: fully functional, New Atlas Copco GA110VSD+FF screw compressor from 2020 with only 14,000 hours. 110 kW with 13 bar. Integrated dryer and frequency controlled. Dqz0Cl

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, pressure: 10 bar Power 22kw main engine speed: 3,000/min D7Vbgt0 Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Year of construction: 2020, Condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm Dcqvh8Zlhp unused 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: good (used), Year of construction: 2008, operating hours: 3,000 h, overall weight: 3,500 kg, pressure (max.): 7.5 bar, Equipment: type plate available, PROD. ATLAS COPCO TYPE - GA110 S/N - APF134315 YEAR - 2008 POWER (kW) - 121 PUMP. - (m3/min) Bfl2Tjb2Cpi CIS (bar) - 7.5

Condition: used, fuel type: diesel, motor manufacturer: Cummins 6BT5.9-G2, Field of application: Construction Dprggd Empty weight: 1.695 kg Generator capacity: 100 kVA Transport dimensions (LxWxH): 291x112x158 Please contact Sales Department for more information

Condition: used, ETVS7 30 B10 CTADS, Atlas Copco electric screwdriver Model: ETVS7-30-B10-CTADS Condition: Used Bjq9G0F3Jqp

Condition: like new (used), Year of construction: 2019, operating hours: 19,393 h, Functionality: fully functional, Premium GA110VSD+ screw compressor. Cycrsq00Z8 Year of manufacture 2019 with approx. 19,000 operating hours. 110 kW with 13 bar. TOP condition.

Condition: good (used), Screw compressor Hlmfzuudm Manufacturer: Atlas Copco Type: GA 810 Power: 75 kW Max. pressure: 10 bar

Condition: good (used), Year of construction: 1996, overall weight: 3,500 kg, volume flow: 1,248 m³/h, Equipment: type plate available, PROD. - ATLASCOPCO TYPE - GA110 S/N - AIF037491 Cxcf8Jcs0O YEAR - 1996 POWER (kW) - 110 OUTPUT. (m3/min) - 20.8 CIS (bar) - 7.5 COOLED (AIR/WATER) - air NEW/USED - USED

Condition: used, Year of construction: 1986, operating hours: 47,314 h, Field of application: Construction Empty weight: 2.360 kg Xxnhzgxk Make of engine: Electric Capacity: 18,8 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3.6x1.62x2.3 Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, ETV S7-30-B10 CTADS + 4220 3606 05, Atlas Copco electric corded screwdriver Vw0Rqaj Model: ETVS7-30-B10-CTADS Condition: Used

Condition: good (used), Year of construction: 2005, Screw compressor Manufacturer: Atlas Copco Type: GA 110 Dqtrix Year of construction: 2005 Operating hours: approx. 54,110 h Power: 115 kw Pressure max. 7.5 bar

Condition: used, Year of construction: 2019, operating hours: 2,873 h, fuel type: diesel, motor manufacturer: Perkins, Field of application: Construction Empty weight: 2.350 kg Generator capacity: 100 kVA Dqudph Please contact Sales Department for more information

Condition: used, ETVS7 30 B10 CTADS + 4220 0982 05, Atlas Copco electric corded screwdriver Bxv0730Aym Model: ETVS7-30-B10-CTADS Condition: Used

Condition: used, Year of construction: 2020, operating hours: 6,866 h, fuel type: diesel, motor manufacturer: 2 x Scania, Field of application: Construction Empty weight: 10.400 kg Generator capacity: 1.100 kVA Please contact Sales Department for more information Dqudoj

Condition: used, ETV S7-30 B10 CTADS, Atlas Copco electric screwdriver Model: ETVS7-30-B10-CTADS D7Tlyis Condition: Used