Wide belt sander

BÜTFERING SKO 111 /C

Condition: used, Year of construction: 2000, Working width .- mm With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Fpeljvwfl Ujhccqpsg

Condition: good (used), Year of construction: 1995, Working width 1100 mm Number of sanding units 1 st. Workpiece thickness max. 160 mm Fpoleulncushccqpog sanding belt measurements 1120 x 2150 mm Motor roller 15 kW Feed motor 1 kW Feed speed 2,5 - 13 m/min. Weight 2600 kg

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Felhccqjvvkkaspepg Storage location: Nattheim

Condition: used, Used machine Long belt sander Motor power: 4 PS / 3 kW Fpjlhccqokwhcrspsg Engine speed 2890 rpm Table dimensions approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions approx. 3600 x 1600 x 1450 mm Weight approx. 500 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2000, machine/vehicle number: 61786, Technical data: - Manufacturer: Bütfering - Type: Super 111 L - Year of construction: 2000 - Sanding belt width: 1120 mm - Sanding belt length: 1900 mm - Weight 1.500kg - Combined sanding unit with switchable sanding drum sanding drum and air sanding pad. - Height-adjustable steel contact roller with with grain equalisation for calibration and a controlled air cushion shoe - Sanding belt speed 18m/s. - Sanding belt drive with electronic wear-free brake, Optical, non-contact sanding belt control. - Multifunction lever for motorised workpiece thickness adjustment with LED digital 3 display and Actuation of the belt feed with 2 speeds 4 + 8 m/min. - Workpiece guidance through spring-guided pressure rollers in front of and behind the sanding unit. Fpjlhcev Sb Nrecqpeg - Roller table at infeed, length approx. 300 mm - Roller table at the outfeed, length approx. 300mm - Workpiece thickness gauge, standard 0 - 50mm - Suction volume: approx. 1850m3/h - Suction nozzle: Ø 180 mm (sanding unit) - Drive motor: 11kW - Total connected load: approx. 13kW - Operating voltage: 400 V / 50 HZ. Dimensions: - Length: 1,335mm - Width: 1,750mm - Height: 1,890mm- Location: in stock

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum ) Fpolhjv Ecy Seccqpsg

Condition: used, Bütfering Optimat SCO 113 - Diamond C + LACK CONSTANT TABLE MACHINE / automatic head adjustment Stable frame construction with constant workpiece infeed height of 900 mm by adjusting the machine head. Workpiece thickness settings from 3 - 160 mm 1st unit combined steel contact roller and electronically controlled segment sanding pad unit CPS II system with variable sanding pressure 2nd cleaning unit - brush unit Sturdy VACUUM TABLE for large-area support High-performance blower with control flap integrated in the machine stand. Table segmentation activated via the terminal Extendable workpiece support Working width 1350 mm Additional table in the outfeed - can be folded down Infinitely variable feed speed 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquer carpet and vacuum generator 3 kW infinitely variable belt speed for lacquer sanding 2 - 18 m/sec. Felou Hzt Dohccqpjpg Oscillating belt radiation for working width 1350 mm Motor power 1st unit 15 kW Motor power 2nd unit cleaning brush unit 1.5 kW 14' touchscreen display control for automation and management of all work programs Machine is WORKSHOP REFURBISHED in TOP CONDITION ex stock Lieboch

Condition: ready for operation (used), Year of construction: 2006, Wide belt sander manufactured by Bütfering Type Optimal STO 110 / C Year of construction 2006 Compact wide belt sanding machine from a small joinery business Working width 1100 mm Passage height max. approx. 150 mm Equipped with a combination sanding unit Combination unit (steel roller + sanding pad), 15 kW Belt speed 18 m/sec. Sanding belt length 1900 mm Fslhccqjumlkljpjpg Feed adjustable, max. approx. 13 m/min. Compressed air: 8 bar Power supply fuse: 50 A Operating voltage: 400 V, 50 Hz Total connected load: 17 kW Weight approx. 1700 kg

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: well maintained constant working height with combination unit with steel contact roller and electronic CPS pressure beam with 25 mm pitch Sanding width 1100 mm Sanding belt length 1900 mm Workpiece thickness min./max. 3 - 150 mm Feed speed: infinitely variable 2.5 - 13 m/min Sanding unit 11 kW Lacquer package: Infinitely variable belt drive speed via frequency converter Belt blow-off device Vacuum carpet with blower Control system: Terminal with 50 program memory locations Simple menu control with plain text display Visual display of the active elements in the cycle Fully automatic PLC-controlled start sequence for all drives Digital working time recording with cleaning brush Roller table at the infeed Fslhccswb Egrjqpjpg Roller table at the outlet Weight 2200 kg Suction capacity 1850 ³/h Suction nozzle 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6-8 bar Air requirement 10 l/min Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2005, machine/vehicle number: 0411490843, With new carpet Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) Fpslhccqju U Ry Hjpeg 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - Location: in stock

Condition: used, Bütfering Sandy E-Line 111 Wide-belt calibration and fine grinding machine Automatic steel contact roller unit CPS electronically controlled segmented sanding shoe unit Cleaning brush unit Working width 1100 mm Feed speed 4 + 8 m/min Motor power approx. 15 kW RTE additional compact roller table in the infeed and outfeed Folhccewcnm Rsqpspg Machine is WORKSHOP OVERHAUL and in TOP CONDITION Ex stock in Lieboch

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation Fpslhcovdtxijcqpjg - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 1600 U/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored Fpelhccqeru Rfhepeg The headstock sliding guides were recoated and scraped. *

Condition: ready for operation (used), Siemens 6SN1118-0DG22-0AA1 Control module version C , E Status and serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Fslhcoudqw Docqpjpg

Year of construction: 1990, Condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Fjlhccqoh Izh Ijpopg Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg Fpjlhevtfxyeccqpjg

Condition: used, Year of construction: 2020, machine/vehicle number: 2466578, overall weight: 6,700 kg, fuel type: electric, color: red, Equipment: UVV, Technical data - Year of construction: 2020 Fpelhceqyal Sscqpjg - Working height: 15.00 m - Platform height: 13.00 m - Platform dimensions (LxW): 1.20 x 0.96 m - Load capacity: 200 kg - Total weight: 6700 kg - UVV: new - Drive: Electric 2WD functional, general signs of wear, 2WD drive, integrated charger, gradeability 25%

Condition: ready for operation (used), Siemens SINUMERIK 802C 6FC5500-0AA11-1AA0 operator panel version C SN: C-A5E01169222, used, signs of use, 100% functional, scope of delivery as per photos Fpelheudrdxeccqpog

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Fpjlhcevb Up Decqpjg Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: used, Year of construction: 2021, machine/vehicle number: 2466848, overall weight: 6,700 kg, fuel type: electric, color: red, Equipment: UVV, Technical Data - Year of construction: 2021 - Working height: 15.00 m Felhceqyamdocqpspg - Platform height: 13.00 m - Platform dimensions (LxW): 1.20 x 0.96 m - Load capacity: 200 kg - Total weight: 6700 kg - UVV: new - Drive: Electric 2WD functional, general signs of wear, 2WD drive, integrated charger, gradeability 25%

Condition: new, Siemens 6FC5111-0CB01-0AA0 Peripheral module E Stand C , unused in original packaging, 100% functional Fpjlji Edyashccqpjg

Condition: used, Year of construction: 2017, machine/vehicle number: 2465808, overall weight: 7,995 kg, fuel type: electric, color: red, Equipment: UVV, Technical data - Year of construction: 2017 - Working height: 11.95 m - Platform height: 9.95 m - Platform dimensions (LxW): 1.20 x 0.92 m - Load capacity: 200 kg - Total weight: 7995 kg - UVV: new - Drive: Electric 2WD functional, general signs of wear, 2WD drive, integrated charger, gradeability 25% Fpoloqyalkehccqpjg

Condition: used, Year of construction: 2020, machine/vehicle number: 2466478, overall weight: 7,995 kg, fuel type: electric, color: red, Equipment: UVV, Technical data - Year of construction: 2020 - Working height: 11.95 m - Platform height: 9.95 m - Platform dimensions (LxW): 1.20 x 0.92 m - Load capacity: 200 kg - Total weight: 7995 kg - UVV: new - Drive: Electric 2WD Foljqyalrjhccqpopg functional, general signs of wear, 2WD drive, integrated charger, gradeability 25%

Condition: used, Year of construction: 2019, machine/vehicle number: 2466338, overall weight: 6,700 kg, fuel type: electric, color: red, Equipment: UVV, Technical Data - Year of construction: 2019 Fjljqyal Ijhccqpepg - Working height: 15.00 m - Platform height: 13.00 m - Platform dimensions (LxW): 1.20 x 0.96 m - Load capacity: 200 kg - Total weight: 6700 kg - UVV: new - Drive: Electric 2WD functional, general signs of wear, 2WD drive, integrated charger, gradeability 25%

Condition: used, Year of construction: 2020, machine/vehicle number: 2466568, overall weight: 7,995 kg, fuel type: electric, color: red, Equipment: UVV, Technical data - Year of construction: 2020 - Working height: 11.95 m - Platform height: 9.95 m - Platform dimensions (LxW): 1.20 x 0.92 m Fpjlhccsqyalvoqpog - Load capacity: 200 kg - Total weight: 7995 kg - UVV: new - Drive: Electric 2WD functional, general signs of wear, 2WD drive, integrated charger, gradeability 25%