DOUBLE LOADER (DOUBLE CAGE)

BARGSTEDT (HOMAG Group) TBH 200/D/C

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 F92Avcl Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26

Year of construction: 2001, Condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Xapv9Qnka Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 2500, with automatic fast handling system. Composed of the following machines: A) DOUBLE LOADER (BRIDGE-FRAME) "BARGSTEDT" TBH 270 / D / 25 / 12 Oly2Hrnwwb B) TURNING DEVICE FOR PANELS (LENGTHWISE TO CROSSWISE) "HOMAG" TDL /310 /25 /12 C) Double-side SIZING and EDGE BANDING machine "HOMAG" Mod. KFL 526/9/A3/25 D) TURNING DEVICE FOR PANELS (CROSSWISE TO LENGTHWISE) "HOMAG" TDL 510/25/12 E) DOUBLE UNLOADER (BRIDGE-FRAME) "BARGSTEDT" TSH 270 / D / 25 / 12 With LINE CONTROLLER - WOODLINE CONTROL PC52

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) H3Agicqa8 Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 3Jtzg X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, machine/vehicle number: 006581, Position 1: Panel Feeding and Loading BARGSTEDT-TBH 510/D/25/12 Position 2: Panel Turning Device BARGSTEDT-TBH 510/D/25/12 Position 3: Roller Conveyors BARGSTEDT-TBH 510/D/25/12 Kdl3M9Wkrt Position 4: Panel Stacking and Offloading BARGSTEDT-TBH 510/D/25/12

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Blwjtdtmxug Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, TECHNICAL DETAILS Type: Automatic cutting machine Longitudinal tools: 6 real + 6 virtual (multi-line processing) Cross tool: 1 piece Tool change: Automatic set-up Cardboard box infeed: Combi, suitable for single sheet and continuous cardboard box Web widths side by side: Two web widths can be alternated side by side Working height: 900 mm Zero edge: Left/right freely selectable Control panel: Right Workpiece parameters: Web width infeed: 350 - 1,500 mm Web width side by side: Total max. 1,350 mm Stacking height incl. pallet: 2,150 mm Pitch of continuous material: 1,150 mm Web length outfeed: min. 300 mm Cutting tolerance: Lengthwise: max. 0.5 % Transverse direction: max. ±2.0 mm Quality of the cardboard: Cardboard thickness: 2.0 - 7.0 mm (±0.2 mm) Raw material quality: Up to 2.30 BC according to DIN 55468 Processable cardboard qualities 1-wall: Thickness up to approx. 4 mm Processable cardboard qualities 2-wall: Thickness up to approx. 7 mm Cardboard types: FEFCO0403 Standard / FEFCO0410 Standard / FEFCO0429 Lid outside / FEFCO0900 Single MACHINE DETAILS Weight: approx. 2,000 kg Dimensions (WxDxH): approx. 3,450 x 2,400 x 3,700 mm Operating pressure: 6 bar Air consumption: approx. 20 - 100 NL/min (depending on cycle output and carton type) Operating voltage: 400 V, 50 Hz, 3 Ph./N/PE Connected load: 4.5 kW Rated current: 6.5 A Max. Back-up fuse: 16 A EQUIPMENT - Online database with performance indicator per carton design - Degree of perforation: Adjustable - Offset creasing: Available - Multiline processing: Possible - Carton designs: Rotatable (90° grid) - Carton designs: Mirrorable - Quality Plus Mode: Supported - Control: PLC control according to IEC 61131 - Industrial PC: Available - Operating system: Windows 7 32bit professional (US) - Memory: 1 hard disk permanently installed, 1 hard disk USB for data backup, Network: 2 x Ethernet 100 MBit - Interfaces: The machine is prepared for the use of tapio, for communication for digital products. - Free use: tapio MachineBoard app included (unlimited in time) - Software: IntelliCut machine control - Automatic carton production: According to production list (HOMAG CSV format) - Softkeys: For machine functions - Fault diagnosis: Available Zrlbyewi - Science program: Included - Display: Control panel with full HD multi-touch display - User interface: Standardized HOMAG user interface - Navigation: Simple, intuitive operation of the machine - Machine data recording MMR basic: For usage-dependent maintenance and display of key production figures (e.g. number of pieces, production time) - Control cabinet integrated in the machine - Machine installed in accordance with European standard EN 60204 - Machines are intended for in-house use

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 5 kW Tool clamping system: ETP 25 Vertical drilling spindles: 8 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Dqxo92

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Ch9Q3T8798 Lifting capacity: 250 Kg Movement system: suction cups.

Condition: like new (used), Year of construction: 2021, Young used dowel boring machine. Available immediately. Year 2021, few operating hours. Jnuzwcw08

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Zgatwqyss Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Year of construction: 2022, Cutting length: 3.800 mm Pusher stroke: 3.800 mm Width of lifting table: 2.200 mm Number of grippers: 7 Continuously variable feed: Yes Panel thickness min: 9,5 mm Saw blade projection: 95 mm HOMAG Machine table fully equipped with air jets: Yes Saw blade diameter max: 380 mm Main motor power: 18 kW Scoring saw: Motoric adjustment Label printer: Yes Labelling: manually Lift table: lateral loading, Yes HOMAG EASY2FEED: Yes Stop side: Right side HOMAG intelliGuide: Yes Mejlgrwni HOMAG Roller element on air cushion table: Yes Control: HOMAG CADMATIC 5 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 27,4 kW Space requirement Length: 9,71 m Space requirement Width: 7,42 m Space requirement Height: 2 m

Condition: used, machine/vehicle number: 007695, X axis working area: 3050 mm Y axis working area: 850 mm C2Sddaf9 Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Clrcsc7 Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: used, Year of construction: 2016, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Safety device: enclosed cabin Milling for fittings: Lamello Clamex Control: Homag powerTouch UPS - Uninterruptible Power Supply: Yes HOMAG Plausibility check: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 16 kW Weight: 3.100 kg Space requirement Length: 4,74 m L39S0Jqo0 Space requirement Width: 2,5 m Space requirement Height: 2,5 m

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: Cgdiu99Dnk M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Mod. TFU200/L/30/12/S

Condition: used, Year of construction: 2018, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 HOMAG Split-Head: Yes Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Dqrupn Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: Workpiece return Dowel insertion: Yes Glue system: PVAc Safety device: enclosed cabin Control: Homag powerTouch HOMAG - Uninterruptible power supply: Yes HOMAG Plausibility check: Yes Control cabinet cooling: Yes Software: HOMAG WOODWOP 7.1 Conformity marking: CE mark

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Bfxyjrjywf Separated electric and command panel Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Condition: used, Year of construction: 2021, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 56 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Pickup tool changer: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Interface for .dxf data: Yes HOMAG Plausibility check: Yes Bcye8Gpv HOMAG ecoPlus: Yes Control: HOMAG POWER CONTROL, Homag powerTouch UPS - Uninterruptible Power Supply: Yes Software: HOMAG tapio ready, HOMAG WOODWOP, HOMAG WOODWOP 7.2 Conformity marking: CE mark

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Bfaionpvhm N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Brl8Wqfqef8 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable LAMELLO Clamex: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Dowel insertion: Yes Glue system: PVAc Dowel diameter: 8 mm Dowel length max: 35 mm Safety device: enclosed cabin HOMAG Plausibility check: Yes Control: HOMAG POWER CONTROL, Homag powerTouch Software: HOMAG WOODWOP 8.0, HOMAG WOODWOP DXF-IMPORT Basic, HOMAG WOODWOP LAMELLO CLAMEX Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 Bbk9Ge99Zr VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Year of construction: 2023, Condition: used, Working dimension X: 1.250 mm Working dimension Y: 800 mm Working dimension Z: 80 mm CNC-axes: 3 Horizontal drills in Y: 5 Dowel insertion: Yes Glue system: PVAc Dowel insertion aggregates: 1 Barcode reader: Yes Dqq2Op Stationary machine: Yes 4-field processing: Yes Alternate loading: Yes Clamping system: Pneumatic clamping Workpiece length measurement: Yes Safety device: enclosed cabin HOMAG intelliGuide: Yes UPS - Uninterruptible Power Supply: Yes Control: HOMAG POWER CONTROL PC 87, Homag powerTouch Software: HOMAG WOODWOP 8.0, HOMAG MMR, HOMAG tapio ready Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 11 kW Space requirement Length: 4,2 m Space requirement Width: 1,55 m Space requirement Height: 2,1 m

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer With separate electric and command panel Safety and sound-proof enclosure No. 1 Vertical column to support the working units Min. useful working width (mm) 220 Max. useful working width (mm) 3000 Min. useful working tickness (mm) 6 Max. useful working tickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 H2Ne3Ft Total installed power Kw 40 No. 3 Working groups (for each machine's side): 1 Jumping Scoring Unit Kw 2,2 / Kw 3,2 1 Hogging Unit Kw 5,5 / Kw 7,3 (RPM 3000 / 6000) 1 Jumping Milling Unit Kw 4 / Kw 5,8 (RPM 3000 / 6000)