SAW UNIT

Bernhard Ide GmbH & Co.KG ME 50/6.1

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 756, PUNCHING UNIT ME 40/6.3 - Used machine, function-tested - Working principle pneumohydraulic - Travelling distance: 200 mm, pneumatically supported - Punching force 24 KN at 6 bar - Punching/power stroke: 50/12 mm (power pack S4.50.12D) - Punching sequence max. strokes/min.: 40 (depending on profile and speed) - End position monitoring by limit switch - Installation dimensions for punching tool: (w x h x l) 180 x 138 x 225 mm - Protective panelling with hinged door, limit switch protected - Without inlet/outlet protection channel Iiolhcstx A Akecqpjc - For mounting a column guide frame 350x 250x 250 mm * without column guide frame - without punching tool - incl. sequence control for external punching release (24V signal, potential-free required)

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 28978, UP-STROKE SAW UNIT BASE.3 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Travelling saw sledge 500 mm * motorised via toothed belt - Saw blade drive 1.5 kW - Carbide saw blade Ø 400 mm, 120 teeth - Pneumatic saw stroke - Profile passage according to sawing diagram D-Base.3 - Down-holder bridge, limit switch protected - 2 connection pieces for dust extraction - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - control unit ME Control 20/4 * 7" touch display * 10 programmes * adjustable saw blade lifting height * tipping signal routed to terminals Iolhccewcauajqpjic

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90, PUNCHING UNIT ME 41/2 - Used machine, function-tested - Frame l x w 1000 x 600 mm - Height adjustment with spindle - Travelling distance approx. 25 mm, pneumatically supported - pneumatically operated - Punching force 1,800 N / at 6 bar - Punching stroke length 10 mm - Punching sequence max. 150 strokes/min - Trigger pulse electrical - Without punching tool - Protective panelling with hinged door Limit-switch protected, without infeed/outfeed protection channel - Removable waste container Length measurement - with contact roller and holder for punching step 64 mm - with contact roller /0 20.38 mm Iolhstx Awujccqpsic with one switching cam

Year of construction: 1996, Condition: used, Functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable Iijlhccqetx Axrspec - Fixed extrusion height 1100 mm Central chain lubrication

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers Iolhccjtx Av Roqpjic - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection

Year of construction: 2005, Condition: ready for operation (used), machine/vehicle number: 266, Belt haul-off ME 30/6.1 - used machine, ready to use * NEW haul-off belts are used - 2 AC-drives 0,75 KW each; with digital speed synchronisation - haul-off speed up to approx. 30 m/min - pulling force max. 1200 N - contact length 500 mm - pneumatic caterpillar clamping - surface heigth of lower caterpillar, continously adjustable - 2 transport belts, width 75mm with 6mm LINATEX-surface Iiolhjwcd Nbsccqpjc - hinged safety cage with gas springs, limit switch controlled * inlet and outlet-tunnel 200 mm long for profile clearance 65x30mm - operation panel with 12 m connection cable - manual gap adjustment for mechanical limitation of belt clamping

Year of construction: 2013, Condition: ready for operation (used), machine/vehicle number: 248, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - mounting platform 3950mm x 700mm - motorized length adjustment 500mm - motorized height adjustment 875 - 1025mm - manuell cross adjustment, 50mm - 2 vacuum pumps - 2 manifold with each: * 20 water connections 1/2" Iiolhcceu Tgrvsqpsc * 20 vacuum connections 1/2"

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide Iijlowcaqhehccqpoc * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Condition: used, Functionality: fully functional, High-pressure water pump, e.g., for - laboratory applications or - air humidification (cooling outdoor areas/patios) Iiolhowc Ubnsccqpjc Pressure 100 bar Voltage 230 V Speed 1400 rpm

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Ielhju Thbxsccqpoic Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.