Haul-off unit

Bernhard Ide GmbH & Co.KG ME BASE.3

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 756, PUNCHING UNIT ME 40/6.3 - Used machine, function-tested - Working principle pneumohydraulic - Travelling distance: 200 mm, pneumatically supported - Punching force 24 KN at 6 bar - Punching/power stroke: 50/12 mm (power pack S4.50.12D) - Punching sequence max. strokes/min.: 40 (depending on profile and speed) - End position monitoring by limit switch Iolhcstx A Akecqpsic - Installation dimensions for punching tool: (w x h x l) 180 x 138 x 225 mm - Protective panelling with hinged door, limit switch protected - Without inlet/outlet protection channel - For mounting a column guide frame 350x 250x 250 mm * without column guide frame - without punching tool - incl. sequence control for external punching release (24V signal, potential-free required)

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement Iolhccjtx Av Rjqpoic - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 30627, UP-STROKE SAW UNIT ME50/6.1 - New machine from the IDE stock programme - Type ME 50/6.1-U/6-400/500-K/PP - Base frame 1.5 metres long Ijlhcewcaz Tscqpjic - Travelling saw carriage 500 mm, pneumatically supported - Pneumatic saw stroke - Profile passage according to sawing diagram D-50-6-1, for saw blade Ø 400 mm - Saw blade drive 1.5 kW - Saw blade speed frequency-controlled - Hold-down bridge, limit switch protected - 1 connection piece Ø125 mm for external chip external chip extraction system - Table cover with V2A slats - Protective panelling with hinged door, with limit switch protection (magnetic switch) * With inlet and outlet protection channel, 600 mm long - SPS control ME-Control 10/2 * Integrated operating unit with system and numeric/functional keypad * LCD display, monochrome, size 160 x 80 pixels * 10 preselectable programmes for entering: + part length in mm + number of pieces * Error message in plain text - Length encoder 24 V - 5000 imp/rev. incl. attachments for IDE caterpillar haul-off ME 31/2, ME 32/2 or ME 32/3 - incl. saw blade ø400 mm - without dust extraction

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 90, PUNCHING UNIT ME 41/2 - Used machine, function-tested - Frame l x w 1000 x 600 mm - Height adjustment with spindle - Travelling distance approx. 25 mm, Iielhetx Awueccqpsc pneumatically supported - pneumatically operated - Punching force 1,800 N / at 6 bar - Punching stroke length 10 mm - Punching sequence max. 150 strokes/min - Trigger pulse electrical - Without punching tool - Protective panelling with hinged door Limit-switch protected, without infeed/outfeed protection channel - Removable waste container Length measurement - with contact roller and holder for punching step 64 mm - with contact roller /0 20.38 mm with one switching cam

Year of construction: 1996, Condition: used, Functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable - Fixed extrusion height 1100 mm Iijlhccotx Axrsqpsc Central chain lubrication

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each Iielhccqswcaqhjpjc - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Year of construction: 2005, Condition: ready for operation (used), machine/vehicle number: 266, Belt haul-off ME 30/6.1 - used machine, ready to use * NEW haul-off belts are used - 2 AC-drives 0,75 KW each; with digital speed synchronisation - haul-off speed up to approx. 30 m/min - pulling force max. 1200 N - contact length 500 mm Ielhccqjwcd Nbepsic - pneumatic caterpillar clamping - surface heigth of lower caterpillar, continously adjustable - 2 transport belts, width 75mm with 6mm LINATEX-surface - hinged safety cage with gas springs, limit switch controlled * inlet and outlet-tunnel 200 mm long for profile clearance 65x30mm - operation panel with 12 m connection cable - manual gap adjustment for mechanical limitation of belt clamping

Year of construction: 2013, Condition: ready for operation (used), machine/vehicle number: 248, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - mounting platform 3950mm x 700mm - motorized length adjustment 500mm - motorized height adjustment 875 - 1025mm - manuell cross adjustment, 50mm - 2 vacuum pumps - 2 manifold with each: * 20 water connections 1/2" Ielhccqeu Tgrvjpoic * 20 vacuum connections 1/2"

Condition: used, Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 462, DC Motor 20KW; 2150RPM Automatic feeding system MAAG gear Pump; Type: EXTREX EX 28 GP with control system MAAG; Type: MAAX 5 Input and Output pressure sensors (up to 350 Bar) on the gear pump Possibility to add Inox tank 3.5m length * 0.3m width Iijlswqrrtshccqpsc - Manual adjustments: right/left, up/down, forward/backwards

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2018000607, Digatron BNT-ME Iielheuhv Hfoccqpjc Flexible test system for battery modules up to 60 volts The Digatron BNT-ME was developed to test battery modules in the voltage range from 0 to 60 volts and up to 250 amps. The device is particularly impressive when testing traction batteries, components for the 48-volt vehicle electrical system, batteries for small BEVs or traction batteries. Ideal for laboratories that want to rely on a functional solution with "Made in Germany" quality.