Hydr. Press brake

BEYELER EURO III 3100 x 100 to

Condition: excellent (used), Year of construction: 1999, Technical data: Uqibedlvkf Working length: 4100 mm Distance between the uprights: 3650 mm Pressing force: 100 to CNC control: CYBELEC DNC 80PS 2D Control with simulation controlled axes: Y1 / Y2; X; R; Z1 / Z2 Crowning Stroke: 215 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 4300 x 1850 x 2600 mm Weight: approx. 11 tons Accessories: Upper and lower tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Working length: 2550 mm Distance between the uprights: 2150 mm Pressing force: 225 to CNC control: CYBELEC DNC 70 EURO controlled axes: Y1 / Y2; X Stroke: 300 mm throat depth: 305 mm Motor power: 15 kW Dimensions (length x width x height): approx. 3000 x 1950 x 2650 mm Weight: approx. 10 tons Bodxoztdgcc Accessories: new AMADA punching system The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1996, Technical data: Working length: 3100 mm Distance between the uprights: 2050 mm Pressing force: 150 to CNC control: CYBELEC DNC 908 PS Nd8Djz8O8R controlled axes: Y1 / Y2; X1 / X2 Stroke: 215 mm throat depth: 305 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 3500 x 1950 x 2650 mm Weight: approx. 10.6 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: used, Year of construction: 1991, pressure 100 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 255 mm Utetvjmu3H stroke 215 mm dayligth 410 mm table height 890 mm ajustment speed 100 mm/sec working feed 6,5 mm/sec back stop - adjustable max. 500 mm oil volume 160 ltr. total power requirement 5,5 kW weight 7200 kg range L-W-H 3750 x 1450 x 2500 mm Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 9308337

Condition: repair required (used), Year of construction: 1986, pressure 225 t chamfer lenght 3100 mm distance between columns 2600 mm Control Cybelec 7300 PS total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 3,5*2*3 m Hydraulic clamping for upper tool, hydr. clamping for lower tool, WITHOUT back gauge WITHOUT tools for sheet thickness up to max. approx. 10 mm, stand projection 255 mm; Table width 300 mm; Distance between table and ram approx. 500 mm; Ukwvuyawzz Ram stroke approx. 250 mm, stroke adjustment, Feed speed approx. 80 mm/s Working speed approx. 8 mm/s SALE - Price VHS / against bid Machine is currently not ready for use, Control unit does not start up after a long period of inactivity

Condition: good (used), Year of construction: 1995, Technical data: Working length: 6200 mm Distance between the uprights: 5100 mm Pressing force / press power: 500 to CNC control: CYBELEC ModEva 12S controlled axes: Y1 / Y2; X; R; Z; X1 Caqmkxeww Stroke: 365 mm Motor power: 30 kW CE mark Dimensions (length x width x height): approx. 6600 x 2750 x 4050 mm Weight: approx. 56 tons Accessories Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, pressure 150 t chamfer lenght 3100 mm distance between columns 2550 mm Czfzndpzsm column arm 405 mm table width 150 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 120 mm/sec stroke 215 mm dayligth 465 mm table height 960 mm operating pressure 320 bar oil volume 200 l voltage 3x 400 V total power requirement 15.0 KW weight of the machine ca. 9500 kg range L-W-H 3958 x 2350 x 2750 mm well-maintained condition (!!) - in checked condition - machine video - youtube.com/watch?v=jAmMu71Ccxo Equipment: - BEYELER electro-hydraulic CNC press brake - CYBELEC CNC control - model DNC 800 PS * numerical CNC control unit * 2D graphic programming & product display * color screen * tool & program library * clear and logically structured screen pages * display of collisions * swiveling control, front right - CNC-controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back stop adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled lower beam cambering (BEYELER system) - manual Upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protective device (protective doors) - various folding/bending tools - 1x freely movable 2-hand/foot control - operating instructions (PDF) + circuit diagram

Condition: good (used), Technical data: maximum cutting width: 3100 mm maximum cutting capacity steel St40: 10.0 mm digital display: ELGO Z16 adjustable rip fence Dimensions (length x width x height): approx. 3900 x 1950 x 1750 mm Weight: approx. 8.5 tons Cfl8Eklfmo The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1997, Technical data: Working length: 1550 mm Distance between the uprights: 1150 mm Pressing force: 30 to CNC control: CYBELEC DNC EURO III controlled axes: Y1 / Y2; X Number of stop fingers: 2 pcs. Motor power: 3 kW Working height: 900 mm Dimensions (length x width x height): approx. 2050 x 1550 x 2100 mm Bnu3Gmuxf09 Weight: approx. 2 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 1980, Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Backgauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 hydraulic sheet metal hold-down devices Dpb099 - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Year of construction: 2024, Condition: new, The Maxi 100 is a cable peeler designed to separate copper or aluminum from the housing in electrical cables, whether plastic, lead or any other material of varying thickness. Power consumption: 380 volts / 2.2 kW Edaxaf Weight: 230 kg Possible sizes: 6 - 90 mm Dimensions: Height 1200 mm width 760 mm length 1850 mm Processing speed: 22 meter/min

Year of construction: 2004, Condition: excellent (used), Hydraulic press brake Fab. Beyeler Type. PR6 Year 2004 7Ykjuii29K Technical data Make: Beyeler Type: PR 6 Year of manufacture: 2004 Power: 60 t Working length: 2050 mm Min. safety distance: 290 mm Stroke 165 mm Connected load 5,5 KW Max. Compressed air: 8 bar Max. Closing speed: 200 mm/sec. Weight: 6 t Dimension: L 3,0 x W 2,1 x H 2,35 m Equipment - Controlled axes: Y1, Y2, X, R, Z1, Z2 - Hydraulic tool clamping top + bottom - CNC controlled crowning - 2 support arms - 1 upper tool set length approx. 2200mm ,R1 , segmented - 1 die set V12/88°, length approx. 2000mm, segmented All data without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1990, pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm interface: connection voltage: 380 V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Gw9Nxw3 Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D.

Year of construction: 1999, Condition: used, pressure 150 t Nkwz739Ovn chamfer lenght 4100 mm stroke max. 315 mm Control Cybelec ModEva15T pressing speed 1 --> 10 mm/sec closing speed max. 200 mm/sec Stop Time max. 110 mS compressed air max 8 bar rules for accident prevention 05.2024 DGUV 2025 total power requirement kW weight of the machine ca. 13,2 t - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type “RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax angle measuring device - Hold up at the back gauge - 2 "parking spaces" for the support arms and bending aid (500 mm left, 500 mm right)

Condition: excellent (used), Technical data: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 to CNC control: AMADA OPERATOR II 14-inch TFT color screen controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge throat depth: 415 mm stroke: 200 mm Dpqzcn Working height: 960 mm crowning Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2005, Technical data: Working length: 3100 mm Pressing force: 100 to Zmqa2Vpe CNC control: TS1 2D simulation touch screen controlled axes: Y1/Y2; X; R; Z1/Z2 motorized adjustable back gauge stroke: 290 mm servo-electric drive Tool holder: MODUFIX electric bending aid Motor power: 11 kW Dimensions (length x width x height): approx. 4000 x 2300 x 2900 mm Weight: approx. 6.4 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 3100 mm Pressing force: 150 to CNC control: ARA TS1 2D simulation touch screen controlled axes: Y1/Y2; X; R; Z1/Z2 motorized adjustable back gauge stroke: 300 mm servo-electric drive Tool holder: MODUFIX Motor power: 22 kW Dimensions (length x width x height): approx. 4000 x 2300 x 2900 mm D7Vw7Lc Weight: approx. 13 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers Chgwpg0Atm - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual

Condition: like new (used), Year of construction: 2005, AMADA MODEL HFT 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 1O3 L downstroke CNC Press brake Year 2005 Koxnmhr0 Tonnage 1000 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. Bd28Qxygyt CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: excellent (used), Technical data: Dprkj9 Working length: 3100 mm Stand width: 2650 mm Pressing force: 125 to CNC control: AMADA OPERATOR II graphic 14-inch TFT color screen controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge throat depth: 300 mm stroke: 180 mm Working height: 960 mm Vertical and horizontal infrared light barrier: SICK Motor power: 11.5 kW Dimensions (length x width x height): approx. 3500 x 2200 x 2900 mm Weight: approx. 9 tons Accessories: 1 set of AMADA tools 1-cube die: V50-35-22-16 The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2001, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 100/3 downstoke CNC Press brake Year 2001 Tonnage 100 KN Type CD 2000 CNC Bfos8Iz2Wrd Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: like new (used), Year of construction: 2002, Technical data: Year of construction 2002; revision in 2023 Working length: 3100 mm column width: 2650 mm Pressing force: 300 to CNC control: Easybend 2DT Touch-Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation throat depth: 300 mm Stroke: 800 mm Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: B7Yl9Dzp 1 set of new tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: excellent (used), Technical data: Year of construction: 2000; revision in 2023 Working length: 3100 mm column width: 2650 mm Bme8Xdh2Orm Pressing force: 200 to CNC control: ESA S630, Windows Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation: Wila Moducrown throat depth: 250 mm Stroke: 200 mm Motor power: 15 kW Dimensions (length x width x height): approx. 3600 x 2200 x 2900 mm Weight: approx. 12 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2003, Technical data: Working length: 3100 mm Stand width: 2650 mm Pressing force: 170 to CNC control: CD 2000 controlled axes: Y1/Y2; X1/X2 motorized adjustable backgauge crowning throat depth: 410 mm stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (length x width x height): approx. 3500 x 2200 x 2900 mm Weight: approx. 12 tons Accessories: 1 set of new AMADA tools Biudeju9Zwi Condition: very good hours used: only 6.700 The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.