BEYELER HYDRAULIC BENDING MACHINE 3000X100 T

BEYELER

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressing force: 150 t, stroke length: 415 mm, throat depth: 400 mm, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled; the cylinders were removed and reconditioned, and seals, oil, and filters were replaced. New light barriers were installed, the CNC control unit was tested, and the machine was repainted. Nwjdpey D Ih Rofx Ag Djf TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Control unit: CYBELEC DNC 900 Motor power: 15 kW Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Bending length 3100 mm Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Nsdpown Ebvefx Ag Dswf Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm Njdpfx Aey Diahog Dowf total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: used, Year of construction: 1992, Press Brake Manufacturer: Beyeler Model: Euro III 60x2050 Year of manufacture: 1992 Press force: 60 t Bending width: 2,050 mm Rated current: 16 A Machine weight: approx. 4,600 kg Equipment Comprehensive tool assortment Various upper and lower tools Nodoyni H Ujpfx Ag Djwf Operational and immediately ready for use Machine is fully functional ä16426

Condition: used, Year of construction: 1990, functionality: fully functional, pressing force: 30 t, throat depth: 210 mm, Hydraulic Press Brake Manufacturer: BEYELER Model M2 30-1550 Year of manufacture: 1990 Technical Details Manufacturer: BEYELER Model: M2 30-1500 Year of manufacture: 1990 Capacity: 30 t Working length: 1500 mm Nedpfx Agjy Albre Dewf Throat depth: 210 mm Max. pressure: 320 bar Dimensions: approx. L 2.10 x W 1.20 x H 1.90 m Weight: 1.7 t Equipment • Back gauge 500 mm • Tool holder with 13-slot • Upper tool slightly goosenecked, approx. 80–85° • Lower tool with V8 • Euro II control • Rear safety fence All information provided without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), BEYELER hydraulic guillotine shear 3000x6MM with motorized backgauge, year 1997 Njdpfey Ab Alex Ag Dswf

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97G632, Offer 26031 Technical Data: - Cutting length: 3080 mm - Cutting thickness: 13 mm - Adjustable cutting angle: 0.5° - 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 - 23 min - Motorized backgauge up to: 750 mm - Front angle stop and support arms: 1000 mm - Control system: CYBELEC DNC 10 with input for sheet thickness in mm - Automatic cutting angle adjustment based on sheet thickness - Cutting length limitation Nodpfjyzytysx Ag Djwf - Automatic backgauge positioning - Rear area safety with light barrier - Drive: 400 V / 18.5 kW - Foot pedal - Space requirement: approx. W 3850 x H 1750 x D 1800 mm - Weight: approx. 10,500 kg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Nodpoya Iaqofx Ag Dswf Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 21.000 kg - Documentation available: No Nwedswng Nhjpfx Ag Dsf - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 21000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1985, pressing force: 127 t, stroke length: 150 mm, number of axes: 3, This 4-axis BEYELER RT125x3600 was manufactured in 1985. It features a pressing force of 1250 kN and a bending length of 3600 mm, providing robust capabilities for various bending applications. The machine includes a CYBELEC DNC 7000 Graphic control unit for enhanced operation. If you are looking to get high-quality bending capabilities, consider the BEYELER RT125x3600 press brake we have for sale. Contact us for further details. • Distance between uprights: 3100 mm • Total width of beam: 3790 mm • Throat depth: 380 mm • Installation height: 1400 mm • Control unit: Cybelec DNC 7000 Graphic (CRT display) • Number of axes: 3 (Y1, Y2, X); R-axis manual • Foundation depth: 250 mm (underfloor table portion) • Total depth: 2100 mm (Short X) / 2600 mm (Long X) • Operational status: Machine currently in operation Additional equipment Nwedpfx Ageyyl U To Dsf • Included tooling: Multi-segmented die bed and various top punch segments • Material supports: 2 removable support arms (orange) Technical Specification Bending Length 3600 mm