Machining center Rover 20

BIESSE

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Cedpfx Ahjyrgcbj Isgp Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Cgjdpfx Aoyq Ez Tjh Isp Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Csdpfx Ajyq Avhsh Iogp Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. Cgsdpoyqzrnofx Ah Ijp External reference: 8011

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Cgsdpfx Aeyqxxrsh Ijp Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Working area X: 3800 mm Cgodpfxeynr Rpj Ah Iop Working area Y: 1600 mm 5-axis electrospindle, HSK F63, air/liquid cooling Integrated drilling unit Multifunctional unit with four outputs Vertical drilling spindles approx. 10 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Fixed saw unit in X direction 12-position tool changer Tool changer located at the rear of the machine Worktable with 6 beams 1 vacuum pump Safety photocells Chip conveyor belt Includes vacuum pods and clamps for window frames, cutters/tools, and Cosmosoft software for window frame production.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input current: 33 A, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, power: 22 kW (29.91 HP), pressure: 8 bar, rotational speed (max.): 12,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, INTERMAC (Biesse) MASTER 35 APERTA CNC Glass Working Centre, year: 2006 Csdpfx Ahoynl Hkj Isgp Grinding, polishing, milling, drilling, engraving Power supply: 400 V, 50 Hz, 33.4 A, 22.5 kW In good working condition. Available: NOW

Condition: used, Year of construction: 2010, functionality: fully functional, Biesse Klever 15 - 2010. Flat Table CNC Router with Automatic tool changer. UK Customers = £15,000 (GBP) + VAT. Compact design for space saving. Working Field: 1563mm x 3126mm x 150mm. Tool Pre-setting device for tool length. 8 x Position Automatic Tool Changer. 5 x Position Vertical drill block. Biesse Works software, can link with CAD packages Large Vacuum pump. Cgjdjynkg Ajpfx Ah Iep

Condition: like new (used), pre-milling unit glue station for granulate maximum working height 60 mm guillotine for trimming edge band from roll precision end trimming unit Cgjdeynizlspfx Ah Ijp milling unit for edge band excess from top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2014 weight 1200 kg CE marking

Condition: used, machine/vehicle number: 008374, Max. panel width: 1000 mm Max. panel length: 2500 mm Codpfx Aeyng Amsh Iegp