Machining center

BIESSE Rover A 1343 ATS (5-Axis)

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Chodow Rpd Sepfx Aqweb Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe Cedpsy Rx Tdsfx Aqwjhb As-new, well-maintained condition 521 operating hours 347 spindle hours

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Csdpfx Aetk It Seqwohb Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Chodsu Tvdbspfx Aqweb Capacity : 210 - 370 mm 365 - 520 mm Only available as a set

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Chjdpeyvtugsfx Aqweb

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,540 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 16,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, SafanDarley press brakes are innovative and highly efficient machines on the market, designed for sheet metal processing by the Dutch manufacturer. The precision of bending and reliability have been recognized by users in Poland and worldwide. SAFAN E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servo motors, controlled by long-life frequency inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the slide and the bending process. The slide returns using the force generated by springs mounted on both sides of the machine. Even when idle, the machine virtually does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes. We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes. In addition, the electric drive is insensitive to temperature differences that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-310 model 2009 - Capacity: 150 tons - Bending length: 3060mm - Controller: Safan E-Control - Bending system in 2D mode - 17” color AcuTouch touchscreen monitor - Service panel on a movable arm - Y1/Y2 axis controlled by CNC Back gauge: - X1-X2 axis controlled by CNC - R1-R2 axis controlled by CNC - Z1+Z2 axis controlled by CNC - Upper tool adapter Wila (hydraulic clamp) - Lower tool adapters Wila (hydraulic clamp) - Lightguard safety system with the option to control the upper beam descent Cedpfex Ewnpex Aqwshb - Work area lighting at the front and rear of the machine - Electrical installation 3/N/PE 50 Hz 400/230 V - Opening: 690mm - Distance between machine frames: 3300mm - Machine dimensions (L x W x H): 4450x2120x2900 - Weight: 16,500kg

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Cedpowcyacjfx Aqwshb Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Cedpsrz Irrjfx Aqwohb Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Chsdpfxeyq Hq Nj Aqwjb Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Cedszcpplspfx Aqwshb Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation