CO2 installation & cold room

BITZER CO2 installation & cold room

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Dodpfx Adjpgnftoyski Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: used, Complete stainless steal Capacity: 1600 liters Djdoia N Itjpfx Adyeki Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Dsdeu H Af Uopfx Adyski Height: 115

Condition: excellent (used), Year of construction: 2009, operating hours: 99,000 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.368 m³/h, pressure (max.): 13 bar, COMPAIR L132SR-13A Screw compressor serviced, for sale in excellent condition 123kw power, air flow: 420 m3/h Manufacturer: Compair L132SR 13A year of manufacture: 2009.04 operating hours: 99000 Drive power: 132Kw Pressure 13 bar Flow rate: 22.8 m3/min Dodpfxotvwwbe Adyjki Delcos XL control Main rotor RPM: 2980 voltage: 400v 50Hz 3 phase 85A machine weight: 2358 kg dimensions: 1722 x 920 x 1659

Condition: used, Year of construction: 2010, functionality: fully functional, Two used briquetting presses from Pawert SPM / 3 briquetting presses from DI PIÙ The Pawert presses include, according to the following specifications: - 2 steel sheet silos, each with approx. 20 m³ usable volume, including silo discharge system - 1 briquetting press, make SPM PAWERT AG, type 84/1 - 90/200, machine no.: 1060, power 55 kW - 1 briquetting press, make SPM PAWERT AG, type 96/1 - 90/200 SBP, machine no.: 1140 - Complete conveyor system including 2 cooling lines, conveyor belts, roller conveyors, etc. - 2 cross-cut stations - 1 noise protection cabin for cross-cut saws - 1 feeder, make KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, make KALLFASS, type Super Wrap 650 - De Luxe - inline, machine no.: VD 03.08.445, year 2000, incl. shrink tunnel - Accessories: control and power cabinets, PC controls, frequency converters - Spare parts according to appendix 1 Plant boundaries: - Material infeed: flange of chip conveyor in chip container before the presses - Power supply: input terminals in Pawert control cabinet _____ Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Pressing force: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total installed power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press — Equipment: Material hopper Feed screws Hydraulic system Control cabinets Saws for briquette length cutting Dkodpfx Ajyiyhfsdyji Protective cladding & safety systems Discharge units — Scope of delivery: 3 complete briquetting presses Di Più MB100 Saws Conveying technology & accessories Spare parts by agreement — Areas of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: can be organized by arrangement Price: on request Available for individual sale or as a complete package

Condition: new, Year of construction: 2010, Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich. Dodexxl Ihjpfx Adyjki

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Dkedpfxoyidvde Adyji Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: ready for operation (used), functionality: fully functional, Laska WW-200 G angle grinder whit stainless steel housing and screws. Djdpfx Adjyitqgjyski This machine has 220 volt electric system and various speeds.

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request! Dodjiuzkmepfx Adyjki