Band saw

Bomar Production 280

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Description AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Gbolhccjvk R R Noqqol Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronous running brush for chips removal. Material clamping is performed by a full-stroke sectional vice. The material feed is manual. The cut material outlet is fitted with a slide. The saw band drive is equipped with a frequency convertor that allows the band’s optimal speed to be set against the processed material within the 20-120 m/min range; this significantly increases both the saw band lifetime and the machine productivity. Further, the band is tilted against the vice load surface at 2° angle, which also significantly reduces cutting times and contributes to a longer band lifetime. Thanks to their arms rigidity, double-column bandsaws with a fixed arm position achieve much shorter cutting times (especially in cutting full materials) than machines with articulated saw arms. Key features Both-sided linear guiding of the saw arm Arm laid on linear guiding Automatic downfeed pressure regulation Simple and clearly arranged control

Condition: new, semi-automatic bandsaw with double-sided miter R/L 60° incl. hydraulic band tensioning display Minimal quantity lubrication can be retrofitted Cutting capacity 90° square, approximately 280 mm / flat 410 x 280 mm. 280 mm 45° round R 280 mm / flat 310 x 150 mm square. 270 mm 45° L round flat 330 x 100 mm/280 mm / square. 280 mm 60° R round flat 205 x 100 mm, 210 mm / square. 190 mm 60° L round 220 mm / flat 225 x 100 mm square. 210 mm material circulation 756 mm Blade dimension 3800 x 0, 9x27mm Cutting speed 20-120 m / min. Transmission-2,2 kW Dimensions Lxwxh 2130 x 1070 x 1440 mm Weight 530 kg Golsd Dpzgshccqqjbl Price on request

Condition: ready for operation (used), Functionality: fully functional, Seling 1 x Duplo DF-915 Paper Folding Machine up to 280 sheets/minute Fully functional and was under service/regular maintenance all years Inspection welcome weekdays. Now ready in stock - 1 pallet/colli Gbjlhswglg Njccqqol Only sale B2B - no sale to private Price is net for export - if buyer is a German company then + 19% VAT

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Automatic converting line for bathroom tissue and kitchen towels prodcution Gjlhccev E E Irjqqsbl

Condition: good (used), Technical specifications for the shelving unit: Gslhcswgk T Uecqqsbl Shelving system: Dexion Type: HI280 Technical specifications for installation: Number of shelving rows: 1 Shelving length: 3,890 mm Number of bays per shelving row: 3 Number of shelves plus floor level: 5 The scope of delivery includes: 4x shelf uprights, used Material color: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustable pitch: 25 mm Incl. mesh walls Mesh width: 50 x 50 mm The uprights are pre-assembled 2,400 mm high 800 mm deep 15x grid shelves, used Material color: hot-dip galvanized Total depth: approx. 782 mm (support bar direction) Total width: approx. 1,270 mm (cross bar direction) Support bar dimensions: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh width: 68 x 35 mm Weight per piece: approx. 10.91 kg 8x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 30x shelf beams, used Total length: 1,280 mm Z-profile: 50 x 25 mm Number of hooks: 2 pcs. Weight per piece: approx. 0.84 kg Material color: Sendzimir galvanized 1x load plate with information on bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, cutting capacity: 510 mm, Nice big saw that cuts 0/60 degrees. Super fine automatic saw with mist lubrication Gbelhccowhd H Djqqol

Condition: as good as new (ex-display), Year of construction: 2023, Manual miter band saw for Miters left up to 45° and right up to 30° cutting range Ø 230 mm or 230 x 230 mm drive power 1,1 /1,5 kW saw band 2.720x27x0,9 mm band speed 40/80 m/min connection 400V incl. Golhccekhbg Ujqqjbl - Ergonomic operation - Monitoring of saw band tension - Quick vice adjustment - Coolant device with chip collection tray

Condition: excellent (used), Catalog number 7413 TECHNICAL DATA - track width 300mm - shaft width 300mm - max. disc diameter 350mm - disc hole diameter 70mm - max. cutting height 110mm - min. element length (without insert for short elements) 800mm - insert for short elements - laser * from above - 2 rows of pawls - smooth pressure, sliding shaft - shaft with saws - smooth pressure, sliding shaft * from below - guide - pawls - caterpillar - 2 types of feed speed + smooth - main engine 30kW - central lubrication - table top dimensions 1520x750mm - diameter of the exhaust port 210mm - dimensions length/width/height 1930x1520x1800mm, weight 1678kg – Italian production – insert for short elements, laser Gbeljt N Tzdehccqqjl – used multisaw, very good condition Net price: PLN 38,900 Net price: EUR 9,150 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Iridesse Production Press’ Object of sale: 1 x Xerox Iridesse Production Press with the following equipment: incl. Fiery Server EX-P6 incl. Paperdeck A-CF03 + A-CF04 incl. Finisher A-GW04 + J-B350 + LCS-1 Counter readings: Total: Approx. 12,212,723 pages Colour: Approx. 11,993,317 pages Black: Approx. 219,406 pages Gelhcjwc R Nbocqqjbl Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- 🏗️ Wide Range of Applications Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- Gjlhccsq Nywxoqqobl 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,000 h, Functionality: fully functional, machine/vehicle number: 01, warranty duration: 12 months, year of last overhaul: 2024, For the production of protein 250 kg meal and 150 liter oil in hours. Chicken and meat. Gelhevvxp Reccqqebl

Condition: new, Year of construction: 2020, operating hours: 10 h, Functionality: fully functional, SPECIAL OFFER / 6-Axis Robotic Machining Center Golhccqeu T Rx Tsqebl Product Details • Year of Manufacture: 2020 • Condition: NEW - The system was used exclusively for demonstration and promotional purposes. No heavy-duty or machining work was performed. • New Price: €199,000 net • Warranty: 1-year warranty on the system. Highlights and Special Features 1. OCTOPUZ Software o Value: €25,000 o Serves as an interface between the KUKA controller and SolidCAM. This powerful software makes programming simple and efficient, especially for complex machining tasks. 2. Precise KUKA Robot o Value: €85,000 o Outstanding precision and reliability, perfectly suited for demanding tasks such as milling, cutting, welding, grinding, and polishing, including material handling. o Hand control panel. o Up to 5000 mm machining range. o Up to 120 kg load capacity. 3. High-quality KEB control system o Value: €15,000 o Supports automatic tool changes, spindle control, and specific add-on modules such as:  Chip, steam, and fume extraction  Welding guns  Tool heads for various applications 4. High-speed spindle o Value: €5,000 o Perfect for precise machining of steel, aluminum, wood, plastic, and other materials. 5. Stable frame with large machining table o Value: €20,000 o Aluminum table for horizontal and vertical machining, ideal for small and large workpieces. Note: The stated values refer to the purchased parts only, excluding fastening materials, adapters, and brackets, as well as assembly and machining costs. Applications and Benefits This robotic machining center is extremely flexible and can be used for a wide variety of tasks: • Milling: Complex, three-dimensional geometries with the highest precision. • Welding: Integration of a welding head for versatile metal processing. • Material handling: Automatic workpiece feeding for greater efficiency. • Surface finishing: Polishing, grinding, or deburring. The machining center is ideally suited for integration into a fully automated production line. Sales Price and Options • Special offer: €113,000 net for the existing system in its current configuration. • Modified version: €149,000 net for customer-specific adaptations, such as the integration of tool changes, welding, or laser cutting heads. (Welding and laser equipment are not included in the price and must be provided.) Inspection and Delivery • Connection: The system is ready for operation and can be inspected at any time. • Delivery time: Available immediately. Delivery time for modifications by arrangement. • Disassembly and transport: Not included in the price. Additional features • Future-proof: Expandable and adaptable for new applications. • Mobility: Can be used at different locations. • Cost-effective: Saves time and costs through multifunctional applications. Do you have further questions or would you like individual advice? We are happy to help!

Condition: good (used), Electronic length stop BOMAR type ROLBO Golhcji Dpapocqqsbl Useful length: 3000 mm Useful table width: 330 mm tAdjustable heigth from 500 mm to 1100 mm Total table length: 3450 mm 8 memory lengths possible Voltage: 220 V mono

Condition: new, manual band saw /self lowering with mitre on both sides Cutting capacity 90° round 230 mm / flat 275 x 230 mm / squared 230 mm 45° R round 195 mm / flat 190 x 190 mm / squared 190 mm 45° L round 170 mm / flat 185 x 150 mm / squared 150 mm 60° R round 120 mm / flat 120 x 85 mm / squared 85 mm Material support height 760mm Gslhccqedx Nf Heqjbl saw blade dimension 2720x27x0,9mm Cutting speed 40/80 m/min. drive power 1,1/1,5 kW//400V//50 Hz Smallest diameter 5 mm Dimensions L x W x H 1600 x 1150 x 1477 mm Weight 370 kg - Attachment of a minimum quantity lubrication possible at an extra charge. - Suitable roller conveyor and material stops available

Condition: used, Year of construction: 2012, cutting diameter 250 mm saw band length 2910 mm cutting width 0,9 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 290 x 230 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 x 190 mm capacity 45 degrees: flat 220 x 80 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: flat 120 x 80 mm Gsljuhhx Tehccqqjbl cutting speed 40 / 80 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 760 mm length of rest piece min/max 80 mm feed length 500 mm feed length: multiple programmierbar total power requirement 3,9 kVA weight of the machine ca. 460 kg dimensions of machine L x W x H 1,60 x 1,45 x 1,35 m Accessories: coolant

Condition: new, Functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. Gbslhoq Nxrxoccqqsl 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, saw blade diameter: 500 mm, Fully automatic aluminium crosscut saw AL 500 ANC A fully automatic circular saw designed for cutting profiles and complete materials from aluminium alloys, copper and hard plastics at 90°. The saw feed is controlled pneumatically-hydraulically. The cutting height of the saw blade is adjusted from the main control panel. The saw can easily be connected to an extraction device. The machine is equipped with mist lubrication. The machine is equipped with fixed and movable clamps, their positions are controlled by a ball screw. Gjlhccqov Rxfbsqsbl The length of an individual stroke is 500 mm. The feed length is set from the main control panel on the front of the machine. Main features: Sawing in automatic mode at an angle of 90° Adjustment of the length of cut pieces directly from the control panel Up-to-date operation with graphic touchscreen display Micronizer system for oil mist lubrication

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: 101.323-B1/B2-V5-2, saw band length: 4,780 mm, saw band width: 1 mm, total height: 1,499 mm, total length: 2,568 mm, total width: 1,070 mm, cutting speed: 120,000 mm/min, overall weight: 710 kg, cutting height (max.): 350 mm, power: 3.6 kW (4.89 HP), The Bomar 510.350 DGH is relatively new machine. We purchased from the official importer in 2024 December for a dedicated use and operated for maximum 10 hours. Gbolhov Hnc Uoccqqjl

Year of construction: 2015, Condition: used, Electronic length stop BOMAR type ROLBO Year of construction: 2015 Golhcjwa Rk Hjcqqjbl Useful length: 4000 mm Power: 0,06 kW In good working condition Voltage: 220 V mono Dimensions (L x W x H: )4500 x 600 x 1000 mm Weight: approx 150 kg

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre) - Belt tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - height limitation of the saw frame by means of potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - easy, manual shifting of the vice R/L - electric band tension control with saw band breakage control - Coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers Gbslhccqjctgkzjqsl - Bi - metal saw band M 42 - spider brush Technical Data ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / quadr. 235 x 235 mm 45° R round 220 mm / flat 230 x 210 mm / squared 210 x 210 mm 45° L round 180 mm / flat 205 x 160 mm / squared 160 x 160 mm 30° R round 130 mm / flat 130 x 105 mm / squared 105 x 105mm Drive power: 1.5KW//400V//50 Hz Total connected load: 3.35 kVA Belt speed: 20-120 m/min infinitely variable Saw band dimension: 2910 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm ● Material support height:

Condition: excellent (used), Bomar Type: Bandsaw CLS 420.420 Dimensions: 2654 x 2135 x 1870 LxWxH Power supply: 3x400V,50Hz;TN-C-S 4,5 kw, 16A Belt size: 4670x34x1.1 mm Cutting speed: 20-120 m/min Weight: 950 kg Gslhcsvb Dy Eocqqjbl Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. Golhjq N U Dujccqqebl - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides Gslod Dpz Sshccqqebl - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Condition: new, Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut Golhcod Dpz Ajcqqsbl - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° round 278 mm / flat 340 x 275 mm / quadr. 275 mm 45° R round 260 mm / flat 320 x 255 mm / squared 230 mm 30° R round 155 mm / flat 145 x 115 mm / squared 115 mm 45° L round 205 mm / flat 275 x 180 mm / squared 180 mm Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Gslhcedyn H Tecqqsbl Standard equipment details - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request