Double-decker bus

Bristol

Year of construction: 1963, Condition: used, The bus was built in Bristol (city) by the Bristol company. It is complete and original, including seats. All seats are present and original. It was the last of the type to run in the city, making it a very special piece, even with collector's value. To obtain German papers it can be lowered to 4 mtr (original approx. 4 mtr 10. It drives! and can therefore be easily relocated. As it is clad in aluminum, there is little to do optically Gxc2Dty except for painting, but no warranty! Tips for restoring can be given by a specialist Bus is being sold from private stock / as a private individual. Gardener LW engine 5-speed gearbox

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW Bl2Dukw8J0

Condition: excellent (used), Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor fitted with Nikken 4th axis table Specification: In immaculate condition! Specification: X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Us9O0Jbiu7 Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min

Condition: ready for operation (used), Functionality: fully functional, Machine/vehicle number: 20800243034, Second hand belt fed metal detector, suitable for 25kg sacks and boxes. full working order but calibration certificate expired earlier this year. Solid stainless steel construction. Uqimjxotn7

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Haas VF-5D/40HE 2009 Haas VF-5 D/40HE fitted with a Haas TR210 5 Axis Trunnion table, through spindle coolant, 30 Tool side mount ATC and Renishaw spindle probing. In really nice clean condtion. Photo'd on collection. Control HAAS Main Motor 7.5K 20HP Maximum workpiece weight 1814 kgs Table Size 1372 x 610 mm Travels: X Axis 50 "/1270 mm Y Axis 26 "/660 mm Z Axis 25 "/635 mm. Spindle Speed 8100 rpm Spindle Taper CT40 | BT40 | HSK-A63 Maximum Tool Weight 5.4 kgs Tool Change Capacity 20 stations Machine Dimensions 4438W x 3094H x 2702L mm Machine Weight 5761 kgs Us897Oiap7 Name of Machine: Haas VF-5D/40HE YOM: 2009

Year of construction: 2022, Operating hours: 1 h, Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: WE6EF1P3T-59821D, Installed but never used Loma inline metal detector, stainless steel construction, ideal for the food industry Gpe3Ts

Condition: used, Year of construction: 2009, Mori Seiki NZ1500T2Y Year 2009 Used Mori Seiki NZ1500, with Twin Spindle, Twin Turret, with Driven Tools & 2 x Y Axis, CNC Lathe with Barfeed, Swarf conveyor, Parts unloader, and parts conveyor. Fitted with Mori Seiki Fanuc based MSX-701 iii control. Note: Photo'd as received this morning, more pictures to follow once power up. Control: MSX-701III Capacity: Swing over bed 800 mm. Max distance between spindle nose 1,130 mm. Max. turning diameter 320 mm. Max. workpiece diameter for transferring 300 mm. Max. turning length 810 mm. Us82In3D8L Bar work capacity 52 mm. Axis: X1 Axis Travel 210 mm. X2 Axis Travel 210 mm. Y1 Axis Travel +65 / -45 Y2 Axis Travel -65 / +45 Z1 Axis Travel 810 mm. Z2 Axis Travel 810 mm. Spindle 2 B-Axis Travel 900 mm. C Axis in Main Spindle INCLUIDO/ INCLUDED Feeds: Feed X1/X2 Axis 30.000 mm./min. Z1/Z2 Rapid Feed Z1/Z2 Axis 50.000 m./min. Work feed 0-5000 mm/min. Main Spindle Speed: 60-6.000 rpm Speed ranges 2 Power: 22//18 kW Quill diameter 61 mm. Nose A2-5 Min Spindle indexing range 0.001º Spindle 2 Speed: 60-6.000 rpm Power: 22//18 kW Quill diameter 61 mm. Nose A2-5 Min Spindle indexing range 0.001º Turret Turret type 16 station x 2 Driven Tools Speed 6.000 rpm Max Power Driven Tools 7.5 / 5.5 kW Equipment Swarf Conveyor Parts unloader Parts conveyor Bar Feed Hydrafeed Multi Servo Machine Weight 8.300 kg Machine Dimensions (LxWxH) 3.930 x 2.718 x 2.320 mm

Year of construction: 2022, Condition: new, Functionality: fully functional, Machine/vehicle number: WE6EF1P3T-59820D, Brand new, still in the original box, never used. Inline metal detector with detection resistant chute included. Iswhddi

Condition: excellent (used), Year of construction: 2022, Operating hours: 1,064 h, Functionality: fully functional, Miyano ABX-64SYY In the market for a Top of the Range Miyano?? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Gxc309U Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Full Specification: Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg

Condition: like new (used), Year of construction: 2019, Operating hours: 2,500 h, Functionality: fully functional, Travel distance X-axis: 1,067 mm, Travel distance Y-axis: 610 mm, Travel distance Z-axis: 610 mm, Rapid traverse X-axis: 45,000 mm/min, Rapid traverse Y-axis: 45,000 mm/min, Rapid traverse Z-axis: 40,000 mm/min, Controller model: MAX 5, Spindle speed (max.): 18,000 rpm, Operating hours of spindle: 2,500 h, Spindle motor power: 35,000 W, Spindle nose: HSK 63, Number of slots in tool magazine: 40, Very rarely available on the used market at this year! Immaculate Hurco VMX42HSi with Kitagawa 5-Axis table, only 2500 spindle hours! This machine is fitted with an 18,000RPM HSK 63 Spindle with spindle chiller, High pressure through spindle coolant, Swarf conveyor, Filter mist unit and Hurco’s MAX5 Dual screen fully loaded Winmax control system. Also supplied with an impressive tool holder package that includes right angled heads. Specification: Travels & Capacity X, Y, Z Axis Travel 42 x 24 x 24 in (1067 x 610 x 610 mm) Spindle Nose to Table (Min-Max) 6.0 in (152 mm) Table Size 50 x 24 in (1,270 x 610 mm) Max. Weight on Table 3,000 lbs (1,360 kg) T-Slot Size 5 x .71 in (5 x 18 mm) Peak Spindle Motor 47 hp (35 kW) Spindle Torque (peak - 1 min) 88 ft lbs at 2,800 rpm (119 Nm at 2,800 rpm) Number Of Tools 40 Tool Changer/Spindle Spindle RPM 18000 Tool Type HSK 63 Form A E2Pmsae Max Tool Diameter 3 in (76.2 mm) Max Tool Length 11.8 in (300 mm) Max Tool Weight 17.6 lbs (8 kg) Max Programmable Feedrate 1,575 in/min (40 m/min) Feedrates Rapid Traverse X,Y,Z Axis 1,771 in/min, 1,771 in/min, 1,575 in/min ( 45 m/min, 45 m/min, 40 m/min) Machine Height 112.6 in (2,860.6 mm) Required Floor Space 181.1 x 156.9 in (4,600 x 3,984 mm) Machine Weight 15,600 lbs (7,091 mm)

Condition: used, Year of construction: 2018, Turning length: 1,250 mm, Turning diameter over cross slide: 430 mm, Spindle motor power: 25,000 W, Spindle speed (max.): 3,000 rpm, Travel distance Y-axis: 120 mm, Travel distance Z-axis: 1,360 mm, Rotational speed (max.): 10,000 rpm, Bar diameter: 102 mm, An Immaculate, very well specified and very rarely available, 2018 Japanese built DMG Mori NLX 3000Y-1250 Gen II CNC lathe with Celos–Fanuc control, 12” chuck, 102m spindle bore, 978mm swing & 1250mm turning length. This one is fitted with a BMT turret, has driven tools, C-Axis, Y-Axis, Tailstock, HP Coolant, LNS Servo Bar Feed, swarf conveyor & Renishaw part and tool probing. The machine is fitted with a "Built In Motor" in the turret for high power and high speed driven tool work, coupled with Mori's "Thermal Displacement System" (Coolant circulation in machine's frame), to ensure stability throughout the day. Specification: Swing over bed: 978mm Workpiece dia: 430mm Workpiece length: 1260mm Chuck size: 300mm Turret Type: BMT Hu3Njk0 Turret No of Tools: 12 Travels Stroke X 280mm Stroke Y 120mm Stroke Z 1370mm Rapid traverse X 30 m/min Rapid traverse Y 10 m/min Rapid traverse Z 30 m/min Rapid traverse C 400 r/min CNC control: Celos – Fanuc Driven tool Speed 10000RPM Power 3.7!5.5!5.5 Max spindle speed 3,000 rpm Spindle Motor Power: 25KW (100% DC) Max Torque 995 Nm (100% DC) Max. bar capacity diameter 102 mm Turret Type: BMT Number of driven tools with Max. speed: 12/ 10000 RPM Rapid traverse rate X- Y- Z-axis 30/10/30 m/min

Condition: excellent (used), Year of construction: 2007, Operating hours: 17,000 h, Mori Seiki NH 5000 DCG / 40 YOM 2007 2007 Mori Seiki NH 5000-DCG 4-Axis Horizontal Machining Centre with MSX710- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP 70 Bar Coolant, swarf management and probing. In super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new, with the machine having spent its life in a 1st Tier Aerospace sub-contractor. Also supplied with a Full Set of machine manuals. Photo’d on site, but will be delivered to our Bristol showroom on the 3rd September where better pictures will be taken.. Note: Tomb Stones and Mist Extractor have been retained and are NOT included in the sale. Brief Specification Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II No of Pallets: 2 B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 500 kg Number of tool pockets 60 Dprdpr Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 kW Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Travel distance X-axis: 1,100 mm, Travel distance Y-axis: 610 mm, Travel distance Z-axis: 610 mm, An immaculate 2018 built, XYZ VMC 1100HD vertical machining centre with Siemens Wide Touch Screen 828D with Shopmill control, , optimised Digital Servo Drives, Hardened Table, Rigid Tapping, win Swarf Augers, Swarf Conveyor & Bin, High Pressure Flood Coolant & TSC, LED Worklight., 30 Station Arm Type, Pneumatically Counter Balanced Head, Remote Electronic Handwheel, Networking. n USB P Specification: Axis Table Travel 1,100mm Y Axis Table Travel 610mm Z Vertical Travel 610mm Table Size 1,200 x 600mm Dpcdph Spindle Centre to Column 675mm Spindle to Table 150 - 760mm Column Front to Table Centre 360 - 970mm Rapid Feedrate 24 M/min Cutting Feedrates 1 - 24,000 MM/min Max Table Load 1,500kg T Slot Size 18mm T Slot Number & Pitch 4 off 125mm Pitch Spindle Speeds 5 - 10,000 rpm (12,000 Opt) Spindle Motor 21kW (28hp) Spindle Taper BT40 (SK & Cat Opt) Toolchanger 30 Station Arm type Toolchange Time 2.5 secs Max Tool Diameter 78mm Max Tool Weight 8kg Coolant Tank Capacity 240L Ballscrew (Grade C3) 40mm Dia P12 AC Digital Servo Motors Max Torque X = 20 Nm / Y = 20 Nm Z = 20 Nm 3,000 rpm Machine Weight 7,000kg Footprint 3,250 x 3,500 x 2,810mm

Condition: excellent (used), Year of construction: 2018, Operating hours: 8,500 h, A very rare opportunity to acquire an immaculate and late Celos/Siemens controlled DMG NTX 2000 5-Axis Mill Turn Centre with heavy duty milling spindle, main and sub spindle. Specification: Max. workpiece D x L: 670 x 1,538 mm 65mm bar capacity Bxukqhu9Me X-Y-Z strokes: 675 x 300 x 1562mm, Turning Spindle Speeds: RPM 4000 & 5000 RPM Milling spindle 12,000RPM 22KW & Sub Spindle Turning spindle power 18.5 KW milling spindle motor Through Coolant YOM 2018 Immaculate! Accessories: Celos Siemens control, Renishaw tool measurement, parts catcher and conveyor, HP Coolant and swarf management Still installed and available for live demo's.

Condition: excellent (used), Year of construction: 2013, Turning diameter over cross slide: 220 mm, Turning length: 280 mm, Turning diameter: 400 mm, Spindle bore: 52 mm, Used 2013 XYZ CT52 CNC Lathe in very nice condition, ready for a powered demo in our Bristol showroom. Accessories include swarf conveyor, parts catcher & tool probe 3 jaw power chuck. Specification: Siemens 828D Control with Shopturn Iub2Oewe Power chuck diameter 150mm Maximum swing 400mm Max turning diameter 220mm Max Turning Length 280mm X Axis Travel 185mm Z Axis Travel 325mm Bar capacity 52mm Max spindle speed 5000 rpm Machine weight6 2900kg Footprint W x D x H – 2530 x 1450 x 1715

Condition: excellent (used), Year of construction: 2018, Travel distance X-axis: 650 mm, DMG DMU 50 3rd Gen 5-Axis CNC Universal Milling Machine with swivel rotary table, Fitted with Celos Siemens control, PH150 10- Pallet Pool, 15,000 RPM, Spindle and in super condition! 5-Axis Machining with up to 20,000 rpm speedMASTER 15,000 rpm Swivel Rotary Table for 5-Axes Simultaneous Machining Table load up to 300 kg Swivel area of the B-axis -35°/+ 110° for highest flexibility Cooled table bearings for highest precision Tool magazine with 60 pockets Loading of tools from the front even during machining Bxuqdbwooa direct driven ball screw drives direct path measuring systems in all axes Fitted with Renishaw probing, extended 60 tool ATC and DMG PH 170 10 pallet system, HP coolant and swarf management system. XYZ strokes: 650x520x475mm YOM 2018

Year of construction: 2016, Condition: excellent (used), An immaculate and late XYZ SMX 5000 with ProtoTrak SMX control, power draw bar, electronic handwheels, TraKIng, DFX file reader and quill scale. Cfmfu2Kofu Don't miss this one!

Condition: excellent (used), Year of construction: 2002, Machine/vehicle number: 950616, Used 2002 Bridgeport VMC 500 XP, a really small foot print VMC in super condition and unusually spec'd with Heidenhains top end TNC i530 control. Ready for a powered demonstration at our Bristol showroom. Specification: Control: Heidenhain i530 Tool taper: BT40 Cqwlocdi Movement: X 500 mm, Y 340 mm, Z 520 mm Workpiece weight: 500 kg Table: length: 840 mm x width: 360 mm Number of T slots: 3 No of Tools: 16 Foot print L X D X H 2300 mm x 2100 mm 2290 mm Machine weight: 2600 kg

Condition: excellent (used), Year of construction: 2015, 2015 Built XYZ LPM VMC with Prototrak cLPM control in stock here in Bristol. Cmu0174 1 x Used XYZ LPM 710 VMC with ProtoTrak PMX control, 8,000 RPM spindle , with quick setting table. Specification: Table size 900 x 500 mm X Travel 785 mm Y Travel 470 mm Z Travel 530 mm Spindle centre to column 489 mm Spindle to table 85 – 610 mm Rapid feed XYZ Axis 20M / Min Max table load 460Kg T slot size 18 mm T slot number & pitch 5 x 100 mm Max Spindle speed 8000 RPM Ft9Yd3T Spindle motor 15 HP Spindle taper BT40 Tool magazine capacity 16 Max tool diameter 80 mm Max tool weight 7 kg Coolant capacity 220 Litres Ball screw size 40mm dia x 8mm pitch Machine weight 3,410 kg Footprint W x D x H 2870 x 2246 x 2743

Condition: excellent (used), Year of construction: 2008, Travel distance X-axis: 1,016 mm, Travel distance Y-axis: 508 mm, Travel distance Z-axis: 635 mm, Spindle speed (max.): 12,000 rpm, Power: 0.023 kW (0.03 HP), 2008 Haas VF3-DCE (so has Data Communication. Equipment included for communication for offline storage/programming) Machine photo'd still ion operation. More pictures to follow when it arrives in our Bristol showroom. Machine is fitted with a Haas 5-Axis trunnion table, extended 24 tool side mount ATC and through coolant. Specification: X Axis 40.0” 1016 mm Y Axis 20.0” 508 mm Z Axis 25.0” 635 mm Spindle Nose to Table (~ max) 29.2” 742 mm Spindle Nose to Table (~ min) 4.2” 107 mm SPINDLE Max Rating 30.0 hp 22.4 kW Max Speed 12000 rpm Max Torque 90.0 ft-lbf at 2000 rpm 122.0 Nm from 2000 rpm Drive System Inline Direct-Drive Taper BT40 Bearing Lubrication Air / Oil Injection Cooling Liquid Cooled TABLE Length 48.0” 1219 mm Dmmpdl Width 18.0” 457 mm T-Slot Width 0.626” to 0.630” 16.00 mm T-Slot Centre Distance 3.15” 80 mm Number of Std T-Slots 5 Max Weight on Table (evenly distributed) 1750 lb 794 kg

Condition: excellent (used), Year of construction: 2012, Turning diameter over cross slide: 320 mm, Turning length: 533 mm, Turning diameter: 510 mm, Spindle bore: 65 mm, Spindle speed (max.): 6,000 rpm, Choice of 2, both identical!! 2012 built Doosan Lynx 220B CNC lathe with Fanuc control, 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. Ovywleae tailstock, tool setter & swarf conveyor. Specification: Main Spindle Turning Diameter Max: 320mm Main Spindle Turning Length Max: 533mm Main Spindle Chuck Diameter: 200mm Main Spindle Max Swing: 510mm Main Spindle Bar Diameter Max: 65 mm Tail Stock Quill And Body: Standard RPM: 6,000 rpm Max Tools 12 No of Axes and Travels 2 X Axis 175mm 30m/min Z Axis 552mm 30m/min

Condition: like new (used), Year of construction: 2010, Travel distance X-axis: 406 mm, Travel distance Y-axis: 305 mm, Travel distance Z-axis: 250 mm, Total length: 9,150 mm, Total width: 3,050 mm, An immaculate 2010 built, HAAS Mini Mill with ATC, Renishaw Tool Probe, coolant, . The machine is in fantastic condition! Specification: Machine Control: Haas CNC Table Size: 915mm x 305mm (36" x 12") Machine Travels (X/Y/Z) : 406mm x 305mm x 250mm (16" x 12" x 10") Spindle To Table Distance : 100mm x 356mm (4" - 14") Table Capacity : 228Kgs (500 Lbs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 15m/min (600 IPM) Maximum Cutting Feed Rate :12.7m/min (500 IPM) Tool Changer Style : Carousel Sv8Tbrfcq Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 5.5Kgs 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Tool Probe, Coolant system, Rigid Tapping, Manuals

Condition: like new (used), Year of construction: 2022, Here’s the very 1st used MACH 845-8T Toolroom VMC to appear on the 2nd hand market! This low hours, highly spec’d and immaculate example is equipped with DynaPath’s Windelta touch screen control has been rented to a FE College and is now availabel for sale...its in as new condition, has an 8,000RPM spindle, 8Gb memory, 1,000 blocks of look ahead and is Wi-Fi enabled for remote support from MACH & DynaPath..(that’s included on this used machine tool ) Taken from MACH Machine Tools marketing material, they say; This small footprint, high build and component part quality toolroom VMC features MACH’s cleverly designed 8 position ATC that’s arrange around the 10,000 RPM spindle, for simple, efficient and quick tool changes. As with all MACH CNC machines, the MDS 845-8T is equipped with DynaPath’s feature packed Windelta control system, with touch screen user interface. The control is capable of accepting multiple programme formats via its inbuilt USB, Ethernet or wireless interfaces. It can be programmed Conversationally, via DXF, in ISO/EIA G-Code formats and has a DFX and DFX program editor in built, making the control capable of accepting and editing programmes in any machine format. As a standard feature its equipped with full Wi-Fi connectivity for remote factory support. It has a huge 8Gb of memory, 1000 blocks of look ahead, for high quality and fast 3D contouring, a solid-state hard drive, Yaskawa digital drives and servo motors and a Delta spindle drive that controls the 10,000 RPM Direct Drive spindle, all mounted in an air-conditioned electrical cabinet. Specified way beyond its price point and backed up by the now legendary, MACH-DynaPath’s worldwide Wi-Fi remote support and team of dedicated engineers. Specification: Travels: X/Y/Z: 800 / 450 / 450 mm Spindle Nose to Table: 90 ~ 537 mm Centre of spindle to column: 435 mm Spindle Taper: BT40 Spindle Max RPM: 8,000 RPM Table Size: 850 x 420 mm T-Slots: 18 x 85 x 4off Max Table Load: 220 kg Max Rapid Rate: 20 m/min Max Cutting Rate: 10 m/min X/Y/Z Axis Type: Linear rail with roller bearings + Ball Screw ATC Type: 8-Tool Independent Arm, arrange around the spindle Max Tool Dia: 63 mm Ø Ckpomsloed Max Tool Weight: 5 kg Tool Change time: (Tool to Tool) : 2.8 sec Spindle Motor: 5.5 kW (7 HP) / 35 Nm X/Y/Z Servo motor rating: Yaskawa 0.85 / 0.85 / 1.3 kW Positioning Accuracy: 0.005 um Repeatability: ±0.003 um Power requirement: 15 Kva (supplied with 415V-220V 7kVA Transformer for UK) Air requirement: 6 kg/cm3 Footprint: (LxWxH): 2200 x 2539 x 2304 mm Weight: 3750 kg Control System: DynaPath WinDelta with 15" Touchscreen LCD D11 Console, MPG Handwheels, Conversational + DXF + ISO/EIA G-Code UKAS & CE compliant safety modules, interlocks & certification. 415V to 220V 7kVA Supplied with: UKCA/CE safety enclosure, interlocks and electrical equipment, 10,000 RPM BT40 spindle, set of 8 pull studs, through spindle coolant, bed wash, coolant/air gun, swarf augers, LED machine lighting, end of cycle light stack, electrical cabinet air conditioning, MPG, 8Gb of memory, DFX File reader with program editor, 1000 blocks look ahead, Wi-Fi remote support.

Year of construction: 2014, Condition: excellent (used), An immaculate and well maintained 2014 built HAAS VF-2, 7U32Vscoyi Briefly, this machine has just arrived into the Bristol showroom, and awaits installation, but has been so well maintained its ready for a powered demo in our Bristol showroom. Specification: TRAVELS: X Axis 30 " 762 mm, Y Axis 16 " 406 mm, Z Axis 20 " 508 mm, Spindle Nose to Table 24 " 610 mm, Spindle Nose to Table 4 " 102 mm TABLE: Length 36 " 914 mm, Width 14 " 356 mm, T-Slot Width 5/8 " 16 mm, T-Slot Centre Distance 4.92 " 125.0 mm, Number of Std T-Slots 3 3, Max Weight on Table (evenly distributed) 1500 lb 680 kg

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, Turning diameter over cross slide: 305 mm, Turning length: 406 mm, Turning diameter: 406 mm, Spindle bore: 86 mm, Bar diameter: 64 mm, An immaculate 2017 built HAAS ST15 with tailstock, tool setter, parts catcher & swarf conveyor. Ready for demo in the Bristol showroom. Specification: Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Diameter (with VB turret) 305 mm Max Cutting Diameter (with VDI turret) 173 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm X Axis Travel 200 mm Bnv7Xi7Rrc9 Z Axis Travel 406 mm Spindle Nose A2-6 Max Rating 20.0 hp 14.9 kW Max Speed 4000 rpm Max Torque 150.0 ft-lbf at 500 rpm 203.0 Nm at 500 rpm Spindle Bore ø 88.9 mm