Gas Boiler

Buderus Logano plus GB402-470

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Iisdpfx Anstmqi Dowsc The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm gear width 152 mm total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 Iijdpfx Aoyan N Eenwsc FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: excellent (used), Buderus heating boiler Output 1950 kW. Available with gas or oil burner upon request. Iiodsw Sl Amjpfx Anwec

Condition: excellent (used), Year of construction: 2006, Thermotec PX06 Chiller Manufacturer: Thermotec NV Model: PX06 Version: H35CX Series: 06C---B01 Year of manufacture: 2006 Iodpfxsrgn Rls Anwoic Refrigerant: R407C Number of identical circuits: 2 Maximum permissible pressure HP: 2800 kPa LP: 2000 kPa Water Permissible temperature: 3 to 30 °C Tank volume: 950 liters Permissible tank pressure: -20 to 600 kPa Nominal pump flow rate: 45 m³/h Nominal head: 30 m Maximum suction side pressure: 16 bar Maximum discharge side pressure: 28 bar Electrical data Voltage: 3x380/415V 50 Hz Rated power: 64.5 kW Max. electrical current: 118 amps Protection class: IP54 LCD control panel: Carel PGD0000f00 Controller: Carel PC02000AM0 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used refrigeration systems in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Iisdpfx Anoxq Hgcswsc Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: ready for operation (used), Offered are 4 used geared motors. Fully functional. SEW Eurodrive gear units. Iisdpfoy At Erjx Anwec

Condition: good (used), Year of construction: 1994, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW Iiodpfx Ansy Dgmlowec -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg