Envelope inserting machine

Buhrs Buhrs BB 300

Condition: refurbished (used), Year of construction: 2007, We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Ctmhil9Xgv Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also availabl optional. Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Condition: used, Year of construction: 2003, 8 gathering section 7 x rotary feeders eject gate turn over vacuum pump Wztom770

Year of construction: 2007, Condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Ctmhakp9J0 Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also availabl optional. Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Condition: refurbished (used), Would you like or need to enhance your current Buhrs ITM envelope inserting system? That is possible, we have all the possible original modules to do so! We have all the original modules available which can be installed at the beginning, on top of the maschine base, or at the end of your Buhrs ITM (W+D) envelope inserter can be installed. Possible modules: - Mueller Apparatebau single sheet feeder transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Mueller Apparatebau paper cutting sytems for continues paper to single sheets A4 documents transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Buhrs ITM turning belt modules Dpcaxx - Buhrs ITM Alignment modules - Buhrs ITM Mailtable module - Buhrs ITM feeders like - rotary - friction and shuttle feeders To enhance and or upgrade your current Buhrs ITM BB300, BB600 or BB700 machine? Yes it is possible!

Condition: refurbished (used), Year of construction: 2004, We have a Buhrs ITM - W+D BB600 14K year 2004 servo envelope inserting system available. The condition of this machine was already very good but we still given this machine complete maintenance and installed new parts where it needed it and even more! This BB600 is now equipped with 5 rotary feedes but this can be changed up to your demands. Other feeders and camera's optional possible! Year of built: 2004 Bi9R3Cv7Dye Configuration: - 6 station base - 5x RF2 rotary feeder - Divert bin - Conveyor Would you like to see this machine? No problem, please come over and see it for yourself!

Year of construction: 2017, Condition: excellent (used), Machine number: Y201095 Built in: 2017 Size: DL-C4 mm Speed: 10.000 c/h Equipment • 6 station base • 5 rotary feeder • 1 inserting station • 1 reject gate Djdlv9 • 1 envelope feeder • 1 belt delivery optional equipment: -- not included -- • extra rotary feeders • shuttle feeders • delivery system Condition: good working, machine can be inspected in production

Condition: used, Year of construction: 2005, We have here 2 Buhrs ITM BB300 8K year 2005 availabe. Both are working but for the price we are offering them as is per piece you can also think about usin them as spare part machines. We can offer these as-is or after complate maintenance. the price mentioned is as-is Configuration: Buhrs ITM BB300 8K 6 station base 4 rotaty feeders Turnover belt Umwnh0Zpgf Conveyor

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Speed: up to 8,000 cycles/h Envelope formats: C6 to B4 Configuration: Good feed for a total of 8 feeders 4 x AT25 drum feeders 4 x AS25 sliding feeders (2 x flip-flop circuit) Basic program for selectivity, including adaptation of all feeders for selective feeding BB300 inserting module - packaging thickness 13mm, insertion aid, D/V pump Dpqwe9 Delivery belt, length 2.5 m, incl. kicker Buhrs NeuroCheck camera system for BCR reading + additional camera for comparative reading

Condition: refurbished (used), Year of construction: 2006, We have a Buhrs W+D BB300 10K envelope inserting system available. This machine is built in 2006. This system is already equipped with a Lake Image camerasystem with 4 camera's for matching! Year of built 2006 8 station base Configuration: Buhrs BB300 - 10K 8 station base 5 rotary feeders 1 shuttle feeder Divert bin Autoloader envelope station Conveyor belt Czwolbsl Machine is completely ready for a Mueller transactional system channel. Feeding/reading/accumulating/folding A4 documents. A used Mueller transactional channel is optional also available. More and other feeders possible. Machine is ready after complete maintenance. Would you like to see a demo, please stop by!

Year of construction: 2006, Condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. This machine is built in 2006. Year of built 2006 6 station base Configuration: Buhrs BB300 - 10K SOLO 6 station base 4 rotary feeders 1 shuttle feeder Djnzsv Divert bin Conveyor belt Machine is completely ready for a Mueller transactional system channel. Feeding/reading/accumulating/folding A4 documents. A used Mueller transactional channel is optional also available. More and other feeders possible. Reading camera's for matching optional! Machine is ready after complete maintenance. Would you like to see a demo, please stop by!

Year of construction: 2005, Condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2005. Year of built 2005 6 station base Configuration: Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Vv9G0U Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Year of construction: 2005, Condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2005. Year of built 2005 6 station base Configuration: Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. Ygolgr8T More and other feeders possible. Reading camera's for matching optional! Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Condition: excellent (used), Catalog number 7385 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - disc bore diameter 70mm top: - 3 rows of ratchets Brsc2Rgrgq - smooth pressing, sliding shaft - shaft with saws - smooth pressure, slipping shaft from below: - slip roller - guide - pawls - track - 2 types of feed speed + smooth - main motor n22kW - feed motor 1kW - central lubrication - dimension of worktop length / width 1430x700mm - diameter of the suction nozzle 150mm - dimensions L/W/H 2300x1450x1750mm, weight 1550kg - made in Italy - very good condition - used multi-saw Net price: 25900 PLN Net price: 5886 EUR depending on the price 4,4 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7317 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 300mm - max cutting height 100mm - max blade diameter 300mm - disc bore diameter 70mm top: - 2 rows of ratchets - smooth pressure roller, slipping - pressure Nku0Inp - shaft with saws - 2 smooth pressure, sliding shafts bottom: - guide - pawls - caterpillar - 2 types of feed speed + smooth - main motor 22kW - feed motor 2,2kW - central lubrication - worktop dimension L/W 1750x690mm - insert for short elements - diameter of the suction nozzle 2x150mm - dimensions L/W/H 2280x1800x1500mm - weight 1795kg - made in Italy - used multi-saw, very good condition Net price: 32900 PLN Net price: 7477 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 2006, We have a Buhrs ITM - W+D BB600 14K year 2006 8 station servo envelope inserting system available. The condition of this machine was already very good but we still given this machine complete maintenance and installed new parts where it needed it and even more! Of course all covers are at the machine! This BB600 is now equipped with 5 rotary feedes but this can be changed up to your demands. Other feeders and camera's optional possible! Year of built: 2006 Configuration: - 8 station base Ccbuydc - 5x RF2 rotary feeder - Divert bin - Conveyor This system is fully prepared for a Mueller Apparatebau transactional channel for feeding/reading/accumulating/folding A4 documents. We can offer you a used transactional channel as wel. Would you like to see this machine? No problem, please come over and see it for yourself!

Condition: good (used), Year of construction: 2006, We have a Buhrs ITM - W+D BB600 14K year 2006 8 station servo envelope inserting system available. The condition of this machine was already very good but we still given this machine complete maintenance and installed new parts where it needed it and even more! Of course all covers are at the machine! This BB600 is now equipped with 5 rotary feedes but this can be changed up to your demands. Other feeders and camera's optional possible! Year of built: 2006 Configuration: - 8 station base - 5x RF2 rotary feeder - Divert bin - Conveyor This system is fully prepared for a Mueller Apparatebau transactional channel for feeding/reading/accumulating/folding A4 documents. We can offer you a used transactional channel as wel. R82Wvb9Non Would you like to see this machine? No problem, please come over and see it for yourself!

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 Gxagx0A - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 14,000 cycles per hour

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Dnd8Bl Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 14,000 cycles per hour

Condition: reconditioned (used), Year of construction: 2016, We have a Buhrs - W+D BB700 16K S2 year 2016 servo envelope inserting system available. The condition of this machine is very good and the machine is completely maintained. The machine is prepared for a Mueller transactional channel for feeder/collating/folding A4 documents. Mueller system can be offered in or excluded at the machine. At this moment it is equipped with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2016 Configuration: - 6 station base - 4x RF2 rotary feeder Kukf7F3G - Divert bin 1 - Divert bin 2 - Divert bin 3 - Turnover belt - Alignment table - On-edge conveyor Prepared for a Mueller transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm Bz9Uaqcxoi spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: new, Experience unmatched precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in semi-automatic and CNC versions. With a grinding diameter of 300-1000mm, you have endless possibilities. Some machines are available from stock! Discover our extensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in ROBBI's years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines with grinding length up to 2m (further models available upon request): TECHNICAL MAIN DATA: Model Omicron CNC 60 or semi-automatic series Grinding diameter 595/695 mm Grinding length 1000 - 3000 mm max. workpiece weight between centers 1200 kg TECHNICAL MAIN DATA: Model Omicron CNC 36/32 or semi-automatic series Grinding diameter 320 / 355 / 455 mm Grinding length 630 - 2030 mm max. workpiece weight 120 (250/300 opt.) kg CONVENTIONAL MACHINES: TECHNICAL MAIN DATA: Model Omicron E Series Grinding diameter 360 - 430 mm Grinding length 630 - 1530 mm Workpiece weight between centers 200 - 300 kg ACCESSORIES (EXAMPLE FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tank Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the fabric table Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in axes: X and Z Optimized cycle with geometric and operational parameters - CNC grinding machines meet the requirements for producing medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. Dgmd8Kx - It is possible to design the grinding wheel for geometries specifically created for the required production type. - High-precision machining can be carried out when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for knowledge of ISO programming. The input of parameters is facilitated by a series of messages and symbols that explain the meaning of the different parameters step by step. Programming of work cycles is done by entering the same cycle parameters. The order of execution of the various cycles can be changed quickly and intuitively. By the way, in addition to affordable new machines and tested used ones, you can expect more from us: • Consultation and problem-solving on-site at your location • Organization of transport of your machine to your factory • Installation, assembly, commissioning, and operational handover and more.

Condition: used, Multi-blade saw Bmdi0Dmiv8S Gabbiani SA 300 Chain transport width 300mm Min-max saw blade diameter: 200-300mm Main engine 30PK Cutting height 100mm Transport dimensions: 1800x1700x1500mm, weight 1500kg

Mileage: 10 km, Power: 10 kW (13.60 HP), Fuel type: electric, Gearing type: other, Axe configuration: 4x2, Overall weight: 4,735 kg, Empty load weight: 4,435 kg, Maximum load weight: 300 kg, First registration: 10/1995, Emission class: none, Color: yellow, Driver cabin: other, Brakes: other, Number of seats: 1, Year of construction: 1995, Condition: used, Equipment: Cabin, * MULTIPLE AVAILABLE * German device * Self-propelled aerial work platform * Electric drive 24 Volt * Driver's seat * Width only 1,350 mm * 16 m working height * Ideal for narrow alleys and sidewalks * 3 person license * 300 kg load capacity * 360° rotatable * 6 electro-hydraulic extensions * Overall length: 3,750 mm * Dead weight: 4,735 kg * Max. wind speed: 11 m/s * Permissible lateral force: 360 N * Sliding platform: 2,500 x 1,000 mm * Permissible vertical load on total platform 3 persons * 2 persons on the extension platform * 4 mechanical outriggers If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - . Kmhz7X0

Condition: used, Technical data: Causmhy7Lp Track width: 300 mm Max cutting height: 100 mm Max saw blade diameter: 300 mm Smooth feed regulation Automatic lubrication system Antireflection protection Culaga Extraction port: 2x160 mm Safety switch Power supply: 380 V Engine power: 22 kW Producer: Gabbiani Machine dimensions: Length: 1630 mm Width: 1800 mm Height: 1450 mm

Year of construction: 1979, Condition: excellent (used), GABBIANI SA350 300/130 tracked multisaw Italian production – insert for short elements – used multi-saw, very good condition TECHNICAL DATA track width 300mm roll width 300mm maximum cutting height 130mm maximum disc diameter 350mm disc hole diameter 70mm in advance: 2 rows of pawls + smooth pressure, sliding roller + Ckdrvjyalo pressure + shaft with saws + 2 smooth pressure and sliding rollers +