Key-way milling machine

Busch

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Nodpjzwudcjfx Adhewk Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar Nedpfszvrm Ejx Adhowk The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Nwjdpszvrmrofx Adhok Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time). Nsdpfx Aozvrmfjdhowk

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number Nwedpfx Adjzvrlushek WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. New oil. New oil filter. New exhaust separators. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), Nedszvrh Aspfx Adhowk pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Nwjdpfx Aozvrhpedhek Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. Nedpfx Adezvrgrehewk The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.09 mbar.

Condition: used, 2 bore measuring screws, internal measuring screw from manufacturer Busch D.B.P.a., registered design. 2-point internal micrometer – bore micrometer, used with wooden case – Friedr. Strack Wuppertal Nwsdpfx Adjzumc Sehjk Measuring range [mm] 25-30 / 30-40 Scale graduation [mm] 0.005 Price upon request. All technical specifications are subject to printing errors and omissions. Sale exclusively to countries within the EU.

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Nodpfx Adotu H Eijhewk Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"