Vacuum paddle dryer

Buss C-102

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Lsdpfx Akelc Dv Usyshf

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Lsdpfex R D Efex Akyohf Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file