L1000/2-C carton erecting machine (hamburger and f CE

Edgesanding machine Tecnolegno

Call

Drive: Wheel Power: 166 kW (226 HP) D7pmh3w Empty weight: 16.150 kg CE mark: yes Serial number: CAT0140MJB9M00275 Emissions / Stage: EU Stage IIIA Front attachment: Front Blade Caterpillar 140M AWD motor grader for sale. EU machine, comes with CE Machine has 1 owner, Germany EU Stage IIIA EPA Tier 3 - Front blade - Multi shank ripper - ALL-WHEEL DRIVE - EUROPEAN ARRANGEMENT - AC with Heater - Roading arrangement Excellent condition used German machine according to the year of manufacturing a...

Listing

Scerne

8667 km

Tecnolegno Compact, CE

1998

good (used)

€1,700

Caterpillar 950 M (CE + EPA)

Call

Listing

Ritthem

7456 km

2017

excellent (used)

€109,000

Eccentric Press - Single Column

Call

General information Colour: Yellow Field of application: Construction Serial number: CAT0950MEXCJ10152 Technical information Power: 187 kW (254 HP) Chassis type: articulated AdBlue system: Yes Make of engine: C7.1 ACERT Top speed: 40 km/h Empty weight: 19.200 kg Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information EPA Marked: yes EPA Marked: yes Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 B...

Listing

Eislingen/Fils

7988 km

BEUTLER P 96 - C 630 (CE)

2000

used

Call

pressure 063 t throat 300 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Dkzwx9 Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 6,3 t Dimensions (WxDxH) 1,8 x 1,6 x 2,6 m permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combinat...

Listing

Hüfingen

7968 km

CATERPILLAR 390FL ME ( CE/EPA )

Caterpillar 390FL ME ( CE/EPA )

2015

excellent (used)

€239,000

Asymmetric three-roll round bending machine

Call

CATERPILLAR 390FL ME year: 2015 operation hours: 12.805 hrs. ROPS protection cabine Airco Radio back drive camera Central lubrication Monoboom stick: 2,90 meter rock bucket width 2,20 meter Pzk7ge u/c 60% good trackshoes: 610 millimeter width CAT C18 engine with 406 kW CE / EPA operation weight: 90 to.

Listing

AKYAPAK 1050 x 140 x 5,5 (1050 x 4,5 mm) CE

Staufenberg

7810 km

AKYAPAK 1050 x 140 x 5,5 (1050 x 4,5 mm) CE

1999

used

Call

Asymmetric three roll round bending machine make AKYAPAK type 1050 x 140 x 5,5 Machine # 4169 Year of manufacture 1999 Technical data: Bending length 1050 mm bending capacity 4,5 mm max. bending thickness 5,5 mm roll diameter 140 mm min. diameter 175 mm drive power 2,2 kW weight approx. 1150 kg dimensions approx. 1820 x 850 x 1150 mm with - control panel - foot pedal - CE-marking - digital display for rear roller infeed Faavjawzsx - swing out top roller used, in good condition

Listing

Fumane (Verona)

(dealership location)

8269 km

Kosme Labelling Machine adhesive

Kosme EXTRA AGH 504 4T S3 E3+CE+CO

2002

used

Call

Used Kosme Labelling Machine adhesive type YOM 2002 Upgrade your labelling process with the reliable and efficient Kosme adhesive labeller 2002 labelling machine This used machine is designed to attach labels to glass containers with precision and speed Kosme Labelling Machine a trusted manufacturer made the Kosme 2002 labelling machine It has the model number EXTRA AGH 504 4T S3 E3 CE CO and was manufactured in 2002 With a speed of 2500 BPH it can handle high volume labelling applications The m...

Listing

Silvi

8681 km

Edgbander Biesse Stream B1 9.0 , CE

BIESSE STREAM B1 9.0, CE

2003

ready for operation (used)

€5,000

Caterpillar 352 FL XE MHD 17m-reach demolition (CE+EPA)

Call

• MIN. PANEL WIDTH MM. 65 • MIN PANEL LENGHT MM. 150 • MIN THICKNESS MIN MM. 10/60 • EDGEBAND THICKNESS MM. 3 • THICKNESS OF COILED EDGEBAND MM.20 • FEED MAX 25 M/MIN. • AUTOMATIC GLUE LOADING KIT • PREHEATING UNIT YES • PREMILLING YES • STRIP MAGAZINE 6 POSITIONS • END -TRIMMING UNITS YES • FINE MILLING UNITS YES • ROUND CORNER TRIMMING UNITS WITH CHANGE TOOLS YES • UNIVERSAL OPERATING UNIT YES Biqqucopyx • SCRAPER PROFILE YES • GLUE SCRAPER YES • HOT AIR BLOWER YES • CONTRO...

Listing

Caterpillar 352 FL XE MHD 17m-reach demolition (CE+EPA)

Ritthem

7456 km

2016

good (used)

Call

General information Colour: Yellow Field of application: Construction Serial number: CAT0352FTSD200228 Technical information Power: 317 kW (431 HP) AdBlue system: Yes Make of engine: C13 Empty weight: 60.480 kg Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes EPA Marked: yes Beduzlu Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Delivery terms: EXW Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroe...

Listing

Eislingen/Fils

7988 km

CATERPILLAR 390FL ( CE/EPA )

OEVERMANN & NIEDRINGHAUS DPS 160 (CE)

1996

used

Call

pressure 160 t distance between columns 1380 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm B2yh3bbmj2 pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDx...

Listing

Hüfingen

7968 km

Caterpillar 390FL ( CE/EPA )

2019

excellent (used)

€385,000

Calibraiting Sanding line 2+4

Call

CATERPILLAR 390FL year: 2019 operation hours: 9.638 hrs. Cyv9kj9hfu ROPS protection cabine Airco Radio back drive camera Central lubrication Monoboom stick: 2,90 meter rock bucket width 2,20 meter u/c 60-70% good trackshoes: 610 millimeter width engine with 406 kW CE / EPA serviced by CAT dealer Zeppelin operation weight: 90 to

Listing

Hørning

7535 km

COSTA LEVIGATRICI KH CC-CCTT 1350 (CE)

2005

excellent (used)

Call

The line is available (free) from December 2023 ----- E2jbr0a 1350 mm. workingwidth, 1000 mm. fixed working height, sanding belts l x w = 2620 x 1380 mm., Panel thickness 3-160 mm., Feeder speed 4-24 M/Min., Aggregates: 2 drums from bottom corn 80 + 120 and 2 drums corn 80 +120 / 2 pads corn 150 + 180 from top. Brush + AirJets blowers. Total Power 193 kw - See attached photos + PDF

Listing

Scerne

8667 km

Cnc 3 Axis Morbidelli

Morbidelli A 504, CE

ready for operation (used)

€6,000

Caterpillar 772G (CE + EPA)

Call

Three-axis machining center pantograph boring head automatic tool changer more information on request Cbl3sfiehi

Listing

Ritthem

7456 km

2016

new

Call

General information Colour: Yellow Field of application: Construction Serial number: KEX00238 Technical information Power: 451 kW (613 HP) Chassis type: rigid AdBlue system: Yes Make of engine: C18 Top speed: 79 km/h Empty weight: 82.100 kg History Number of owners: 1 Condition General condition: good Technical condition: good Visual appearance: good Other information EPA Marked: yes EPA Marked: yes Max. working load: 51600 kg Emission level: Stage V / Tier IV final Delivery terms: EXW Trans...

Listing

Eislingen/Fils

7988 km

MEYER-SCHNEGG AM 4-120/420 (CE)

2011

used

Call

pressure 120 t distance between columns 430 mm E3b9om2 stroke 125 mm distance table/ram, stroke up 400 mm table surface area 430 x 450 mm table height over floor 860 mm side window 230 mm ram surface 250 mm working speed 10 mm/s oil volume l power requirement 11,0 kW weight 2,5 t dimensions (WxDxH) 1,6 x 1,3 x 2,4 m year of manufacture 1974 overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand and foot operation No foundation pit necessa...

Listing

Caterpillar M317F mit 3DTrimble Earthworks (CE/EPA)

Hüfingen

7968 km

M317F (CE/EPA)

Caterpillar M317F mit 3DTrimble Earthworks (CE/EPA)

2018

like new (used)

€151,000

Call

width of machine 2,75 meter year: 2018 operation hours: 3.945 hrs. Gzgtx8 ROPS Airco Radio back-, side- camera LED light paket 3D prepared for Trimble Earthworks hydr. 2 piece boom stick: 2.45 meter all hydr. lines (hammer-, gripper-, scissor-) OilQuick 70/55 bucket/attachment on request central lubrication 10.00-20 tyres: approx 20% good blade support CAT C4.4 engine with 117 kW CE/EPA operation weight: 17.6 to. Only 1 owner, full service history available

Listing

Scerne

8667 km

Planner Paoloni

Paoloni PF 2740, CE

1996

ready for operation (used)

Call

Listing

Salach

7990 km

Edgesanding FMB Levig B.2

HYDRAP HPDb 250 (CE)

1996

used

Call

pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Speed down mm/s Speed up mm/s Working speed mm/s Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m B2yjssir2s permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydra...

Listing

Scerne

8667 km

FMB Levig B 2, CE

2005

excellent (used)

Call

Listing

Eislingen/Fils

7988 km

Single Column Press - Hydraulic

DUNKES HZ 40 (CE)

1997

used

Call

pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse Btrozrpo

Listing

Scerne

8667 km

Toupie Paoloni

Paoloni TC 1400, CE

1997

ready for operation (used)

Call

Listing

Eislingen/Fils

7988 km

LUIGART DRPY 300 SO (CE)

2003

used

Call

pressure 300 t distance between columns 1640 mm stroke 900 mm Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m Cagjtdc3cy year of manufacture 1994 overhaul 2003 permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable de...

Listing

Scerne

8667 km

TRANSFER

FORMETAL TRANSFER A RULLI 90° - CE

2009

excellent (used)

€1,900

Single Column Press - Hydraulic

Call

Listing

Eislingen/Fils

7988 km

NEFF EP-S 40 (CE)

1996

used

Call

pressure 40 t throat 330 mm stroke 250 mm dayligth 450 mm table surface area 800 x 500 mm hole in the table 100 mm Flilnko table height over floor 900 mm ram surface 100 mm feed down 406 mm/sec feed up 393 mm/sec feed under pressure 14 mm/sec oil volume 350 l total power requirement 7,5 kW weight of the machine ca. 4,6 t required space 1,3 x 2,3 x 3,4 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, mecha...

Listing

Eislingen/Fils

7988 km

ZEULENRODA PYZ 160 F (CE)

2008

used

Call

pressure 160 t distance between columns 1300 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1300 x 800 mm table height over floor 920 mm side window 320 mm ram surface 1000 x 700 mm B9lxvp0jo3 speed down 300 mm/s speed up 200 mm/s working speed 11 - 45 mm/s oil volume l power requirement 22,0 + 7,0 kW weight 12,50 t dimensions (WxDxH) 2,8 x 2,2 x 3,9 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dep...

Listing

Eislingen/Fils

7988 km

Drawing Press - r.

HYDRAP HPSK 100 (CE)

1996

used

Call

pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic dr...

Listing

Salach

7990 km

SCHULER-HYDRAP SH 250 1.6/1.3 (CE)

2003

used

Call

pressure 250 t distance between columns 1740 mm stroke 800 mm Distance table/ram, stroke up 1200 mm Table surface area 1600 x 1300 mm Table height above floor 900 mm Side window 850 mm Ram surface 1600 x 1300 mm Speed down 500 mm/s Speed up 450 mm/s Working speed 24 - 65 mm/s Oil volume 2160 l Power capacity 80,0 kW Weight 30,0 t Dimensions (WxDxH) 4,0 x 4,2 x 5,75 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and wa...

Listing

Eislingen/Fils

7988 km

Spotting Press

PERSICO M 100 - MF 2007 (CE)

2007

used

Call

pressure 10 t distance between columns 2850 mm stroke 1300 mm Tool totating table capacity 10 t Distance table/ram, stroke up 2000 mm table surface area 2740 x 1400 mm tool dimensions (W x L) max. 2400 x 1400 mm table height over floor 430 mm ram surface 2670 x 1400 mm tool weight upper plate max. 10 t tool weight lower plate max. 15 t workpiece weight max. 20 t power capacity 10,0 kW weight 14,5 t Dimensions (WxDxH) 5,6 x 1,7 x 3,1 m Tool Rotating device / tool manipulator tool rotating capa...

Listing

Salach

7990 km

double-sided high speed press

DUNKES HDZ 315 / 100 / 63 (CE)

1993

used

Call

pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s w...

Listing

Salach

7990 km

WEINGARTEN ADR 2500.20/11.10 (CE)

2007

used

Call

pressure 250 t stroke fix 100 mm no. of strokes 60 - 160 /min Cilhctmo89 distance between columns 2150 mm dayligth (stroke and adjustment up) 600 mm column travel -side 800 mm table surface area 2000 x 1100 mm hole in the table 1600 x 400 mm table height over floor 1100 mm ram surface 2000 x 900 mm ram adjustment 110 mm power requirement kW Weight 30,0 t dimensions of the machine ca. 4,2 x 1,8 x ´4,55 mxmxm height over floor 4,55 m permitted for automatic mode according to the CE-norm with D...

Listing

Salach

7990 km

LAUFFER RZU 100 (CE)

1996

used

Call

pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm die cushion area mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm speed down mm/s speed up mm/s working speed mm/s oil volume 1200 l power requirement kW weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick ...

Listing

Salach

7990 km

Single Column Press - Hydraulic

CAVENAGHI & RIDOLFI 620 t (CE)

2011

used

Call

pressure 620 t distance between columns 2250 mm stroke 1250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm table surface area 2200 x 1280 mm ram surface 2200 x 1500 mm table height over floor 800 / 1000 mm column travel -side 750 mm feed down 10 - 250 mm/sec feed up 10 - 500 mm/sec working feed 1 - 24 mm/sec oil volume 2000 l B2yiw2lguv power capacity 45,0 + kW weight 42,0 t Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m year of manufacture 1997 - overhaul 2011 permitted for manual put-in...

Listing

Eislingen/Fils

7988 km

MUELLER CL 100.1.84 (CE)

2003

used

Call

pressure 100 t throat 360 mm stroke 600 mm dayligth 900 mm table surface area 1050 x 700 mm hole in the table 120 mm table height over floor 900 mm ram surface 800 x 600 mm oil volume 650 l total power requirement 30,0 kW weight of the machine ca. 11,0 t required space 1,8 x 2,8 x 3,6 m B2yj2ql0uq permitted for manual loading according to the CE Regulations with oil-hydraulic drive, light-guard (Sick), two-hand operation WITH new electrical (safety) control - Siemens S7-1500 F, easy operation...

Listing

Eislingen/Fils

7988 km

try-out press

STENHOJ VWP-K 200 (CE)

2002

used

Call

pressure 200 t distance between columns 1010 mm stroke 400 mm dayligth 700 mm table surface area 1550 x 950 mm hole in the table 150 mm table height over floor 900 mm ram surface 1550 x 950 mm column travel -side 400 mm feed down 10 mm/sec feed up 19 mm/sec working feed 10 mm/sec oil volume 110 l power requirement 18,5 kW weight 11,0 t required space 1,8 x 1,55 x 3,4 m B2yknmsmgm hydraulic try-out press can be inspected in running condition in our warehouse

Listing

Eislingen/Fils

7988 km

Eccentric Press - Single Column

DIRINLER CDCS 2500 P (CE)

1995

used

Call

Pressure 250 t throat 450 mm stroke 8 - 135 mm no. of strokes 50 /min distance table/ram, max. stroke up, adjustment up 635 mm table surface area 1250 x 850 mm hole in the table 355 mm table height over floor 950 mm passage to the back 660 mm ram surface 790 x 610 mm ram adjustment 120 mm power requirement 18,5 kW weight 14,0 t Dimensions (WxDxH) 1,5 x 2,8 x 3,65 m Dvtxyu0 permitted for manual put-in according to the CE Regulations with pneumatic clutch, mechanical overload protection in ram,...

Listing

Eislingen/Fils

7988 km

double-sided high speed press

MUELLER ZE 315-16.24.1 (CE)

2007

used

Call

pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm oil volume l power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m B2yilhnlho year of manufacture 1983 overhaul ...

Listing

Eislingen/Fils

7988 km

HAULICK RVD 63 - 960 HS (CE)

1996

used

Call

pressure 63 t P9ocd distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive,...

Listing

Eislingen/Fils

7988 km

Cable winch

CAMU SCD 615 M (CE)

2008

used

Call

material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Cilg97r3kw Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler with motor, manual expansion, coil loop control

Listing

Salach

7990 km

Toggle Press - Single Column

GRAEBENER GKS 800 (CE)

1995

used

Call

pressure 800 t distance between columns 1050 mm stroke 200 mm no. of strokes 8 - 25 /min distance table/ram, max. stroke up, adjustment up 1300 mm Side window 550 mm table surface area 1030 x 900 mm Capacity of ejector in table 15 t Fgcacm000 Stroke of ejector in table 85 mm ram surface 1040 x 800 mm ram adjustment 120 mm Capacity of ejector in ram 12 t ejector stroke in ram 80 mm power requirement 36,0 - 112,6 kW weight 65,0 t Dimensions (WxDxH) 3,0 x 3,1 x 6,07 m Sinter-metal calibration pr...

Listing

Wijchen

(dealership location)

7560 km

Cutting bench, cutting shear Hydraulic OMAG

OMAG CE 206 S, 2000x6mm

used

Call

Cutting bench, cutting shear Type: Hydraulic Manufacturer: OMAG Type:&nbsp CE 206 S Cutting width: 2000mm Max. thickness:&nbsp 6mm Os9inmxw Electrical backgauge Machine-dimensions: 2400x1900x1600mm Machine-weight: 4000kg

Listing

Gerolzhofen

7947 km

Sizing saw

Altendorf F45 Elmo CE

2001

used

Call

with CNC - stop used, top condition, top equipment make Altendorf type F45 Elmo CE year of construction 2001 Masch.-Nr. 01-06-193 GS-tested CE-type tested GS-wood dust tested engine 5,5 kW steel guides carriage length approx. 3000 mm cutting width approx. 1300 mm max. blade diameter 450 mm swivels up to 45° scoring unit electrically adjustable 2 axes Dloc02 control panel swivels on top rip fence with automatic control table top extension anodized aluminum parts height adjustment electrically swi...

Listing

Leipzig-Stahmeln

(dealership location)

7960 km

Hobelmaschine DUOMAX 1020 CE

WINTER

new

€59,500

ONO plus VAT

Call

Technische Daten: - max. Hobelbreite 1020 mm - min. / max. Hobelhöhe 10 / 200 mm - min Werkstücklänge 310 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 5000 Upm. - Spiralmesserwelle oben + unten mit HM-Wendeplatten 15x15x2,5 mm, FI 100 mm - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 30,0 kW - Motor untere Welle 22,0 kW - Vorschubmotor 7,5 kW - Motor Höhenverstellung 1,0 kW - Gesamtleistung 57,7 kW - Absaugstutze...

Listing

Velddriel

7537 km

Caterpillar CB534D CE / EPA

2006

used

€24,900

SSI Schäfer TRAVERSEN BALK L:180 cm

Call

Power: 93 kW (126 HP) Empty weight: 10.500 kg CE mark: yes Serial number: CATCB534CC2B00164 S08krcs0 CE-certified, EPA 2004, A/C Cabin, Camera, Radio, Good working machine coming from first owner from France. Simular to Bomag BW161AD-4 / BW161AD-5 / BW190AD-5 and Hamm HD+ 110

Listing

Wietmarschen

7603 km

SSI Schäfer TRV1-180-115-30 CE

good (used)

€25