Agricultural machine

Claas Claas CEMIS 1200 + SAT 900

Condition: new, power: 34 kW (46.23 HP), Year of construction: 2024, operating hours: 34 h, Equipment: air conditioning, Weight: 4600 | CLAAS Torion 530 Wheel Loader New machine, built in 2024 Approx. 50 operating hours Technical specifications and equipment: 4-cylinder Yanmar engine with 34 kW / 46 hp Two-stage hydrostatic drive Z-kinematics Hydraulic locking on the tool carrier Mitas 350/70 R18 tires Cabin with heating Gbeljrfbyqehccqqsl Air conditioning Radio including hands-free system Steering column, 2-way tilt and height adjustable Driver's seat with fabric upholstery, air suspension, and seat heating Armrest on the left LED work lights, yes, 2 front and rear Vibration damping Slow-speed control, including engine speed memory Approved as a self-propelled work machine (LoF, 20 km/h) | Internal No.: 11113547

Condition: used, Year of construction: 2016,

Condition: used, Year of construction: 2023, operating hours: 30 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ Approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t including external controls External controls on the front linkage (CIS) 2 engine speed memories with start gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Task Control Basic activation, tractor side Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electro-hydraulic, 6.25 t Lower link Cat. 3 with catch hook Top link Cat. 3/2 with catch hook Automatic drawbar with 38 mm pin diameter Air brake system (dual-circuit) Additional compressed air connection, right side of the cab Gbelhjv R Niweccqqsl Hydraulic system Load-sensing (150 l/min) 3 electro-hydraulic proportional control units, CIS+ Mid-axle control units with front axle and 1 dual-clutch/rear connection 2 plug-in connections at the front HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor Standard rear axle 540/540 ECO + 1000 rpm PTO shaft 6-piece PTO shaft, 1"3/8" With automatic PTO, rear SMART STOP with cruise control management 145 hp max. power, 154 hp homologated rated power, ECE R 120 Automatic, electronic battery master switch 155 hp max. power, 154 hp homologated rated power Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirror, including wide-angle mirror, telescopic Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood LED work lights: 2 front, 4 rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with seat belt MP3 radio with Bluetooth, USB, and hands-free system Cooling compartment for a 1.5 l bottle (under the guide seat) Automatic all-wheel drive, steering angle-dependent | Internal No.: 11114182

Condition: used, Year of construction: 2025, operating hours: 3 h, CLAAS Jaguar 940 Gbslhcswfivrjcqqol Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: new, Year of construction: 2021, working width: 3,000 mm, Cutter bar: Discs | Claas Disco 320 C rear-mounted mower Stock item from 2021 Disc mower with tine conditioner 3.0 m working width 1130 kg dead weight with MAX CUT cutter bar Gbslev Aqnlohccqqjl 7 cutting discs with 2 blades each incl. quick-change blade system 540 rpm PTO speed Mounting category II | Internal no.: 10996987

Condition: used, Year of construction: 2022, operating hours: 109 h, Claas Quadrant 5300 FC Rental machine 5,070 bales produced Equipment: Pickup with POWER FEEDING SYSTEM (PFS), 2.35 m pickup width Pickup gauge wheels, oscillating and manually foldable Hydraulic flywheel brake FINE CUT cutting rotor with 51 knives (51-26-13-12-0) Hydraulic folding for roller chute with weighing system Roller chute with 3 rollers and weighing system (currently removed) Gbslhowbw Rveccqqel Bale ejector Dustproof and pivoting twine box Single wide-angle PTO shaft, 6-piece, 1 3/8" Universal drawbar for top hitch K80 ball hitch Shear bolt coupling Wheel cover for 620/50 tires R22.5 Tandem steering axle Tires 620/50 R22.5 Dual-line air brake system for tandem steering axle Bale deposit sensor Right/left indicator including knotter monitoring ISOBUS cable, without terminal Electric bale length adjustment Automatic baling pressure control Automatic central lubrication system, electrically controlled | Internal No.: 11079529

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed Gbolhewbaytjccqqjl - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889

Condition: new, Year of construction: 2023, operating hours: 70 h, Claas Axos 240 Year of manufacture 2024, approx. 100 operating hours, demo machine used Equipment: Front weight carrier 110 kg True True Gbolev T N Ixohccqqsl Electronic rear linkage control Reinforced lower link, fixed Category 2 catch hook Mechanical inner side stabilizers on the lower link Top link with Category 2 catch hook Electronic rear linkage 3.2 t Automatic trailer hitch Electronic external rear linkage control Open hydraulic circuit, 87 l/min, 3 pumps 3 mechanical spool valves, single/double with flow regulator 30/15-speed TWINSHIFT, including REVERSHIFT with super creeper gear Super creeper gear (0.5 km/h) Top speed 40 km/h ECO Front axle, standard with all-wheel drive PTO 540/1,000 rpm Pivoting front fender, 410 mm Electronic rear PTO engagement All-wheel drive with multi-disk clutch Differential lock with multi-disk clutch 440/65 R24 Mitas AC65 / adjustable rim, reinforced 540/65 R34 Mitas AC65 / adjustable rim, reinforced 103 hp max. power, 98 hp homologated rated power, ECE R 120 105-liter fuel tank with 10-liter urea tank BUSINESS cab Halogen work lights, 2 front & 2 rear Halogen headlights Fabric driver's seat, air-suspended Guide seat, including seat belt Air conditioning DAB+ radio with MP3 function and external microphone | Internal No.: 11113529

Condition: used, Year of construction: 2024, operating hours: 300 h, working width: 10,700 mm, Number of rotors: 10 | Claas Volto 1100 T Gelhcev Aqqaecqqjbl demonstration machine used from 2024 warranty until June 18, 2025 equipment: 10.70 m working width 10 rotors with 1.50 m diameter headland lifting, hydraulic impact cloth for edge spreading limitation, hydraulic swiveling lower link attachment cat. II | internal number: 11181002

Condition: new, Year of construction: 2022, Müller Touch Terminal incl. cable Activation: ISOBUS UT ISOBUS TC Geo Track Leader Section Control Field-Nav Gbsleurdutjhccqqel VRC Track-Leader Auto ASD Track Leader Top | Internal no.: 11116990

Condition: new, AXDL160SNG2525-D-900-1200-E0-00XX-Y-A, NTN SNR linear axis with synchronous motor Golhccqsvrf E Deqobl Model: AXDL160SNG2525-D-900-1200-E0-00XX-Y-A + 1FK7060-2AF71-1CH1 Type: AXDL160S Condition: New

Condition: used, Year of construction: 2008, Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Gbelhccsrixi Toqqsl Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Gbelhceuna E Hocqqjl

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruisende Y-beweging van de kolom: 650 mm Verticale Z-beweging van de freeskop: 3000 mm Horizontale W-beweging van de freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopsteun / support de renforcement de la broche Boorspindelsteun / ondersteuningsportfolio#39;s Cross traverse Y-axis (table/column): 650 mm (column) Gbslhccqsv Sfm Uoqol Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: good (used), Functionality: fully functional, total height: 2,500 mm, overall weight: 3,500 kg, total length: 5,032 mm, total width: 2,050 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, net weight: 3,500 kg, Flip Flow Screen SEWS 1200-3900 is a second-hand equipment. With a 6-month or 1,000-hour warranty. The screw pressure springs are covered with a flexible tube, and thanks to its welded steel design, it is resistant to vibrations. TECHNICAL CHARACTERISTICS Flip Flow Screen SEWS 1200-3900 Material: automotive shredder waste (ASR) Grades: transport possible, free-flowing, not connected Maximum capacity: 12.5 t/h – 25.0 m3/h Apparent density: min. 0.50 t/mª to max. 1.00 t/m° Grain size: 0 – 25 mm Grain size: 30.0 % < 2.0 mm 75.0 % < 4.0 mm Voltage: 400 V Power: 11 kW Speed: 1500 min – 1 DIMENSIONS Width: 2,050 mm Length: 5,032 mm Golevtqa Aehccqqsbl Weight: 3,500 kg

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. Golhcsq Nx Nnjcqqsbl 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: repair required (used), Table size: 2900 x 1200 mm Gbelhjik Hbzsccqqol Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Quantity: 1 pc Price/pc

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm Gsljval Nrehccqqsbl There are 4 M24 holes each on the side wall (left-right) *

Condition: ready for operation (used), Siemens C98043-A1200-L 107 Control card SN:Q69004 ,used, good condition, 100% working, scope of delivery as per photos Gbolhccoudraajqqol

Condition: used, Year of construction: 2003, Functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Gslhjwhkfyoccqqjbl

Condition: used, mileage: 1,001 km, color: red, driver cabin: other, gearing type: other, Year of construction: 2005, first registration: 01/2005, Equipment: central locking, crane, Vehicle location: Bovenden, crane at the rear, can be uncoupled, emergency stop, grab control, foldable, high stand, 2-point mechanical support, radio remote control, 3x hydraulic extensions Construction: Palfinger PKG 12001 B with uncoupling console, high stand and radio control (remote control) Load diagram: 3.7m-3010kg, 5.1m-2100kg, 7.1m-1470kg, 9.2m-1110kg! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Gbelhcjummulecqqel - .

Condition: new, table length 2900 mm table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,77 t dimensions 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N Gelhjd Iinajccqqsbl (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: used, Functionality: fully functional, Year of construction: 2020, operating hours: 4,103 h, power: 308 kW (418.76 HP), fuel type: diesel, Category: Tractor and wood chipper Manufacturer: Claas and Doppstadt Name: Claas Xerion 4000 and Doppstadt DH812Q Gbelhccqsv I Uckoqol Doppstadt DH812Q: Power: 250-370 kW Epsilon forwarder crane type S100F101 - CRANAB Energy wood grapple CE 280 Feeding height: 950 mm / Feeding width: 1,200 mm Rotor diameter: 1,000 mm / Rotor width: 1,200 mm Variable feeding speed Easy screen basket change for quality wood chips from P16 to P100 (G30-G100) Hydraulic pressure device for feed roller LED lighting package: 1x discharge, 2x feed, 1x interior lighting Camera on the Discharge spout Forestry tires 600/50 R22.5

Condition: used, Year of construction: 2015, Auction item. The mower is used on a tractor in working condition. Claas Disco 9100 C (attaches to the rear of the tractor) and Claas Disco 3200 FC (attaches to the front of the tractor) are for sale. The year of manufacture may not be accurate. Gbolhcewim Rnjcqqjl

Condition: used, Year of construction: 2004, operating hours: 3,581 h, fuel type: diesel, Applicable material: Grain Empty weight: 11.000 kg Auction item. Combine harvester in working condition. Sold together with 7.5 m width header and with canola table. There is a new set of sieves. There is a new plastic on the back where it is broken. Gbslhewg Dnrjccqqol Caterpillar engine. The auger with a reducer, where the grain is fed into the hopper, has been replaced. Rotary harvester Belts were changed 2 years ago. Replace shaker board rubber bushing and rotor end rubbers. The grain threshing elevators have been replaced. Threshing hours - 2 277 hours.