Bale press (agriculture)

Claas QUADRANT 5300 FC T+ST CLAAS

Condition: used, Year of construction: 2024, operating hours: 300 h, working width: 10,700 mm, Number of rotors: 10 | Claas Volto 1100 T demonstration machine used from 2024 warranty until June 18, 2025 equipment: 10.70 m working width 10 rotors with 1.50 m diameter headland lifting, hydraulic impact cloth for edge spreading limitation, hydraulic swiveling Fpslhccqsv Aqqaopjg lower link attachment cat. II | internal number: 11181002

Condition: new, power: 34 kW (46.23 HP), Year of construction: 2024, operating hours: 34 h, Equipment: air conditioning, Weight: 4600 | CLAAS Torion 530 Wheel Loader New machine, built in 2024 Approx. 50 operating hours Technical specifications and equipment: 4-cylinder Yanmar engine with 34 kW / 46 hp Two-stage hydrostatic drive Z-kinematics Hydraulic locking on the tool carrier Mitas 350/70 R18 tires Cabin with heating Air conditioning Radio including hands-free system Steering column, 2-way tilt and height adjustable Driver's seat with fabric upholstery, air suspension, and seat heating Fpolhorfbyqsccqpog Armrest on the left LED work lights, yes, 2 front and rear Vibration damping Slow-speed control, including engine speed memory Approved as a self-propelled work machine (LoF, 20 km/h) | Internal No.: 11113547

Condition: used, Year of construction: 2023, operating hours: 30 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ Approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t including external controls External controls on the front linkage (CIS) 2 engine speed memories with start gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Task Control Basic activation, tractor side Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electro-hydraulic, 6.25 t Lower link Cat. 3 with catch hook Top link Cat. 3/2 with catch hook Fslhcev R Niwocqpepg Automatic drawbar with 38 mm pin diameter Air brake system (dual-circuit) Additional compressed air connection, right side of the cab Hydraulic system Load-sensing (150 l/min) 3 electro-hydraulic proportional control units, CIS+ Mid-axle control units with front axle and 1 dual-clutch/rear connection 2 plug-in connections at the front HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor Standard rear axle 540/540 ECO + 1000 rpm PTO shaft 6-piece PTO shaft, 1"3/8" With automatic PTO, rear SMART STOP with cruise control management 145 hp max. power, 154 hp homologated rated power, ECE R 120 Automatic, electronic battery master switch 155 hp max. power, 154 hp homologated rated power Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirror, including wide-angle mirror, telescopic Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood LED work lights: 2 front, 4 rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with seat belt MP3 radio with Bluetooth, USB, and hands-free system Cooling compartment for a 1.5 l bottle (under the guide seat) Automatic all-wheel drive, steering angle-dependent | Internal No.: 11114182

Condition: used, Year of construction: 2025, operating hours: 3 h, CLAAS Jaguar 940 Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Fpelewfivrohccqpjg Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: used, Year of construction: 2023, operating hours: 550 h, Equipment: air conditioning, all wheel drive, CLAAS Arion 550 Cmatic Cebis Stage V demonstration machine used with approx. 570 operating hours Equipment: 540/65 R28 Mitas AC65 / fixed rim 650/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 4.0 t including vibration damping Reinforcement frame for transmission, engine side panels for front loader External operation for front linkage CEBIS operating terminal with touch function CMATIC including engine speed memory plus CSM, CEBIS ISOBUS preparation, rear Activation of Task Control Basic, tractor side AUTO PILOT / GPS PILOT Ready ISOBUS activation for CEBIS CLAAS connect & 365FarmNet - L ELECTROPILOT with reversing function Activation. Video function CEBIS + CPC Incab connection for 2 cameras Electronic. Lifting system control (EHR), standard Lower link Cat. 3 with catch hook Lower link side stabilizers, automatic Hydraulic top link, catch hook Cat. 3 Towbar with drawbar insert Rear power lift, increased lifting capacity Towing jaw, automatic with 38 mm bolt diameter Compressed air brake system (2-circuit) Automatic trailer extension brake Hydraulic system load sensing 150 l/min 4 control units, electro-hydraulic proportional (CEBIS) 2 plug-in connections at the front / 1 pressureless return Power-Beyond, LS connections without flat face coupler CMATIC transmission, continuously variable Gear ratio 50 km/h Front axle PROACTIV with wet disc brakes PTO shaft 540/540 ECO ECO rpm PTO shaft stub 6-part, 1"3/8 Folhevfy N Djccqpopg Front wheel fender, swiveling, 540 mm Steering angle sensor for PROACTIV front axle braked 165 HP max. power, 159 HP homologated rated power, ECE R 120 Battery master switch, electronic Fuel tank 215 l 5-post cabin with 4-point suspension Rear window for 5-post cabin, tinted Rear window wiper Electric mirrors, including wide-angle mirror Fender extensions 2.55 m external width, wheel diameter. 1.93 m Terminal rail, roof liner Removable storage box, left Additional interface sockets 2 driver's replacement headlights, A-pillar Tail lights, standard, LED with warning signs 4x driving headlights LED, 2x work lights LED on hood Work lights LED - Plus Work lights LED - Premium Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seat belt Automatic climate control, including preparation for Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Cigarette lighter Steering wheel, leather 2 LED rotating beacons, foldable Digital package I LED package Premium Driver package Premium | Internal no.: 11113522

Condition: new, Year of construction: 2021, working width: 3,000 mm, Cutter bar: Discs | Claas Disco 320 C rear-mounted mower Stock item from 2021 Disc mower with tine conditioner 3.0 m working width 1130 kg dead weight with MAX CUT cutter bar 7 cutting discs with 2 blades each incl. quick-change blade system 540 rpm PTO speed Mounting category II | Internal no.: 10996987 Fslhccqev Aqnljpspg

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889 Fpslowbaytshccqpsg

Condition: new, Year of construction: 2023, operating hours: 70 h, Claas Axos 240 Fjlhsv T N Ixoccqpopg Year of manufacture 2024, approx. 100 operating hours, demo machine used Equipment: Front weight carrier 110 kg True True Electronic rear linkage control Reinforced lower link, fixed Category 2 catch hook Mechanical inner side stabilizers on the lower link Top link with Category 2 catch hook Electronic rear linkage 3.2 t Automatic trailer hitch Electronic external rear linkage control Open hydraulic circuit, 87 l/min, 3 pumps 3 mechanical spool valves, single/double with flow regulator 30/15-speed TWINSHIFT, including REVERSHIFT with super creeper gear Super creeper gear (0.5 km/h) Top speed 40 km/h ECO Front axle, standard with all-wheel drive PTO 540/1,000 rpm Pivoting front fender, 410 mm Electronic rear PTO engagement All-wheel drive with multi-disk clutch Differential lock with multi-disk clutch 440/65 R24 Mitas AC65 / adjustable rim, reinforced 540/65 R34 Mitas AC65 / adjustable rim, reinforced 103 hp max. power, 98 hp homologated rated power, ECE R 120 105-liter fuel tank with 10-liter urea tank BUSINESS cab Halogen work lights, 2 front & 2 rear Halogen headlights Fabric driver's seat, air-suspended Guide seat, including seat belt Air conditioning DAB+ radio with MP3 function and external microphone | Internal No.: 11113529

Condition: new, CEMIS 1200 steering system incl. SAT 900 receiver GPS PILOT activation TC GEO activation no wiring for the cab Felhcsv T N H Ujcqpopg removed from a Claas Trion combine harvester | Internal No.: 11294366

Condition: used, Year of construction: 2021, working width: 10,700 mm, Number of rotors: 10 | Claas Volto 1100 T 1,500 hectares 10.70 m working width 10 rotary tedders with chassis hydraulically pivoting impact screen Fjlhccov Aqqmsqpopg headland excavation lighting | Internal number: 11018752

Condition: used, Year of construction: 2023, working width: 13,000 mm, Number of rotors: 10 | used Claas Volto 1300 T Year of manufacture 2023 Used in 2024 Guarantee valid until June 28, 2025 Technical data and equipment: Working width 13.00 m 10 rotors with a diameter of 1.70 m Double feeler wheel Fpjlhccqov Aqqgepeg Lower link attachment Cat. II Hydraulic headland lift Hydraulic swivel edge spreading cloth | Internal number: 11181001

Condition: new, Year of construction: 2024, operating hours: 50 h, power: 71 kW (96.53 HP), maximum speed: 40 km/h, front tire size: 440/65 R28, rear tire size: 540/65 R38, Equipment: compressed air brake, Radio | Cab suspension: mechanical | Claas Arion 420 Advanced demo machine used approx. 50 operating hours equipment: front tires 440/65 R28 rear tires 540/65 R38 front weight carrier front loader console for FLEXPILOT multifunction handle FLEXPILOT rear power lift 4.5 t lower link cat. 3 with catch hook upper link cat. 3, mechanical automatic lower link side stabilizers automatic trailer coupling 2-circuit pneumatic brake system open hydraulic system, 100 L/min 3 mechanical control units pressureless return Folhorfppzsccqpopg QUADRISHIFT transmission with 40 km/h gear ratio power take-off shaft 540/540 ECO and 1000 rpm 98 HP homol. Power from a 4-cylinder FPT engine electronic battery master switch 4-post PANORAMIC cabin with panoramic roof Air conditioning Driver's seat, air-suspended MP3 radio with Bluetooth Automatic all-wheel drive | Internal no.: 11181284

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as per photos Fjlhei D Ulyoccqpspg

Condition: good (used), Year of construction: 2013, Functionality: fully functional, cooling capacity: 642 kW (872.88 HP), type of cooling: air, overall weight: 9,590 kg, total width: 2,400 mm, total length: 7,000 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA FX FC NG SL T+ S 2702 642 KW Cooling capacity: 642 kW / 182.5 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module. Freecooling. Heat exchanger for refrigerant subcooling with coolant. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Fjlhccqjvzzxxspjpg Compressors: 2 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 14 pcs. Hydraulic module: 2 pcs. water pump Grundfoss NB65-125+Grundfoss TY50-120. 2 pcs. Expansion vessel. Dimensions: 7x2.4x2.4 m. Weight: 9590 kg. Working hours: 1332/1546 h. Condition: Good

Condition: used, machine/vehicle number: 053560166, sweeping width:72 cm Capacity:1450 Watt total power requirement:1,27 kW weight of the machine ca.:0,225 t dimensions of the machine ca.:0,55 x 1,25 x 1,15 m Fpelhscxxt Soccqpog

Condition: excellent (used), SUDA FC 1530 laser plotter for steel Material / metal Laser type / fiber laser Cutting area / 1500X3000 MM Felsvkf Rdjhccqpspg Cutting thickness / depends on the materials to be processed Brand of laser source / RAYCUS Operating mode / continuous wave Configuration / 3-axis Supported cutting products / sheet metal and pipe Cooling / air-cooled and liquid-cooled with S&A CWFL-1000 unit Cutting speed / depends on different materials Supported graphic format / AI, PLT, DXF, BMP, Dst, Dwg, LAS, DXP CNC / yes Laser head brand / WSX Brand of servo motor / Schneider Brand of guide bar / THK Brand of control system / Cypcut Control system Operating system / CYPCUT system Power supply / 1000W Laser wavelength / 1080nm Working size / 1500*3000 mm Targeting positioning / Red dot Height: 1850 mm Width: 2111 mm Length: 3450 mm Weight (kg) / 2500 kg The announcement is about SUDA FC 1530 plotter + S&A CWFL-1000 cooler. !"Sheet metal straightener is on a separate auction!

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - . Fpjljvikp Njhccqpog

Condition: used, Year of construction: 2022, operating hours: 4,100 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture 2022 Currently 4,100 operating hours Equipment: 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast iron weight 900 kg CIS+ control terminal, color display CMATIC including 2 speed memories (CIS+) Task Control Basic activation, tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year CLAAS Remote Service including five-year license ELECTROPILOT with reversing function Steering interface ready Steering interface activation Electronic Hitch control, standard ELC Lower link rear linkage, Cat. 3 catch hook Lower link stabilizers, automatic Long hydraulic top link, Cat. 3 catch hook Towing bracket with drawbar insert Drawbar with tow ball Ball coupling including tow bar, automatic Cat. 3/3 ball set Air brake system (2- and 1-circuit pre-adjustment), including air dryer Load-sensing hydraulic system, variable pump 150 l/min, 200 bar 4 control valves, electrohydraulic proportional No front connections if front linkage is installed Power Beyond, load-sensing connections with flat-face couplers CMATIC - Continuously Variable Transmission Gear ratio 50 km/h Front axle with PROACTIV brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-piece and 1 3/4" 6-piece Parking brake on the REVERSHIFT lever CMATIC 2.0 - Cruise control deactivation via accelerator pedal (CIS+) Fpolewblkkshccqpjg 264 hp max. power, 261 hp homologated Rated power, ECE R 120 Electronic battery main switch Air compressor Engine brake Cabin with 4-point suspension Roof with rear-opening roof hatch Tinted rear window for 4-post cab Rear window wiper, including right-hand side wiper Electric mirror, including wide-angle mirror Rear fender flares, external width 2.75 m Removable storage box, left Additional interface sockets 2 spare driver's headlights, A-pillar Extra-wide halogen taillights with warning signs 4 halogen headlights, 2 halogen work lights, hood Halogen work lights: 4 front roof lights, 4 rear roof lights Premium LED work lights Comfort seat, fabric, semi-active, laterally suspended Passenger seat with seat belt Automatic climate control, including Cat. 3 preparation MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system | Internal No.: 11060349

Condition: new, Year of construction: 2024, operating hours: 1 h, maximum speed: 50 km/h, Equipment: compressed air brake, onboard computer, Claas Arion 550 Cmatic CIS+ New machine, built in 2024 currently approximately 5 operating hours Equipment: 540/65 R28 Mitas AC65 / fixed rim 650/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 4.0 t including vibration damping Reinforced transmission frame, engine side supports for front loader External control for front linkage CIS+ with color display 24/24 speed HEXASHIFT, HEXACTIV, speed limiter ISOBUS pre-installation, rear Activation of Task Control Basic, tractor side CLAAS communication module (LTE) CLAAS Remote Service including five-year license ELECTROPILOT with reversing function Machine Connect license – 5 years Steering interface, standard Electronic Standard hitch control (EHR) Lower link Cat. 3 with catch hook Lower link side stabilizers, automatic Mechanical top link, catch hook Cat. 3 Towing bracket with drawbar insert Rear power lift, increased lifting capacity Automatic drawbar with 38 mm pin diameter Cat. 3/2 TrueTrue ball set Air brake system (2-circuit) Load-sensing hydraulic system 150 l/min 3 + 2 control units, electro-hydraulic proportional (CIS+) 2 plug-in connections at the front / 1 pressureless return line Power Beyond, LS connections without flat face coupler Transmission without creeper gear Gear ratio 50 km/h PROACTIV front axle with wet multi-disk brakes PTO 540/540 ECO rpm 6-piece PTO stub 1"3/8" Pivoting front fender, 540 mm SMART STOP + Cruise Control Management 165 hp max. power, 159 hp homologated rated power, ECE R 120 Felhov T N Ireccqpopg Electronic battery main switch 245 l fuel tank 5-post cab with 4-point suspension Roof with glass roof hatch Rear window for 5-post cab, tinted Rear window wiper Electric mirrors, including wide-angle mirror Terminal rail, right side window Removable storage box, left Additional interface sockets 2 driver's spare headlights, A-pillar TrueTrue Standard halogen taillights with warning signs 4x halogen driving lights, 2x halogen work lights, hood LED work lights – Basic LED work lights – Basic Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seat belt Automatic climate control Includes Cat. 3 preparation MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system Cigarette lighter Leather steering wheel 2 LED rotating beacons, foldable Type plate, EU Premium Driver's Package | Internal No.: 11181386

Condition: excellent (used), Ametek EM Test Type: VDS 200Q25.2 / AutoWave EMC Measurement Technology EM Test VDS 200Q Series 4-Quadrant Voltage Drop Simulator The VDS 200Q Series is a four-quadrant battery supply simulator and DC voltage source used to simulate battery supply waveforms according to international standards and automotive manufacturer specifications. With a current carrying capacity of up to 100 A or more, depending on the model, the VDS 200Q Series covers all three supply voltage categories (48 V, 24 V, and 12 V) and serves as a high-performance DC voltage supply for DUTs during automotive transient testing. VDS 200Q - Four-Quadrant Battery Supply Simulator and DC Voltage Source The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and automotive manufacturer requirements. Manufacturer requirements, in particular, are an important area covered by the VDS 200Q series, given the wide variety of requirements. The VDS 200Q series also serves as powerful DC voltage supplies Fpelhswck Rfoccqpeg for the device under test during automotive transient testing. The VDS 200Q series covers all three supply voltage categories (48 V, 24 V, and 12 V). Their current carrying capacity ranges up to 100 A or more, depending on the model and application. Advantages of the EM Test VDS 200Q25.2 - Voltage up to 60 V, 2 ranges - 80 V extended option - Current up to 25 A - Four-quadrant, bipolar amplifier - Fast step response time - Very low Ri:

Year of construction: 1994, Condition: good (used), machine/vehicle number: 9067/94-216119 , Palletfeeder SBP.M 66.2 6 Pockets 2 Folding Knives 1 Side Pocket Up to 32 pages folding Largest Sheet Size X : 780 mm Largest Sheet Size Y : 1020 mm Min. Sheet Size X : 140 mm Felhccqofh Nq Topspg Min. Sheet Size Y : 180 mm

Year of construction: 2024, Condition: new, Cutting force 30 Tons or 60 Tons Table surface 1000x600mm or 1600x800 mm The electro-hydraulic upstroke cutting machine with motorized moveable beam type USC is a machine which has been constructed due to our long experience on this area of cutting machines. They are characterized by maximum operational reliability and an optimal overview onto the working table when the cutting beam is retracted. In the standard version of machine the working cycle is released by the contactless operating security light curtain or via the 2 start buttons mounted on the left and right of the machine. Fjlhsnfu Nweccqpjpg The stroke and passage of the machine are continuously adjustable within the specified limits via an electronic measuring system / potentiometer. An eccentric load on the machine is possible due to the extremely stable central guide column and the arrangement of the two hydraulic punching cylinders. The hydraulic power unit in the modular system is housed entirely at the rear of the machine and is easy to access for maintenance purposes. An automatic central lubrication supplies all lubrication points in the stand with a sufficient quantity of lubricating oil. The electrical switching devices are housed in a separate control cabinet, which is permanently installed on the machine. The setting of the machine by means of clear operator guidance is carried out via the touch panel on the side of the machine. A freely programmable controller processes the processes reliably and quickly.

Condition: used, Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: PVC coated steel rope -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m Fpjlhjpy Ryqsccqpsg -Quantity: 2x rope available -Price per piece -Weight: 6.6 kg/pc.

Condition: new, Siemens 6FC5203-0AC00-1AA0 SINUMERIK CNC full keyboard OP 032S ST-M92060514, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Fslhccslpkv Isqpspg

Condition: used, mileage: 136,000 km, Year of construction: 2019, Serial number: YV2RT60G3JA83xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 Folhovyf Rpeccqpjpg - Okay tires - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2025 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Gearbox: Automatic