CTS TSS-70/130 Thermal Shock Test Chamber -80°C to +200°C, 130 liters, water-cooled

CTS TSS-70/130

CTS

Temperature Shock Chamber / Temperature Test Chamber

CTS TSS-70/130 Temperature Shock Chamber
Water-cooled temperature shock chamber, approx. 130 liters

For sale is a used temperature shock chamber
from the manufacturer CTS Clima Temperatur Systeme GmbH.

The test chamber is suitable for temperature shock tests,
cyclic temperature tests, material testing, quality assurance
as well as development and stress tests.

Technical data

Manufacturer: CTS Clima Temperatur Systeme GmbH
Type: TSS-70/130
Device type: Temperature shock chamber / Temperature test chamber
Test volume: approx. 130 liters

External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H)
Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H)
Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H)
Window: approx. 300 x 300 mm
Weight: approx. 950 kg

Temperature range, hot chamber: +50 °C to +200 °C
Temperature range, cold chamber: -80 °C to +100 °C
Temperature change rate: max. 100 K/min on average
Changeover time: < 10 seconds
Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C

Heating rate: approx. 6 K/min from room temperature to +180 °C
Cooling rate: approx. 4 K/min from room temperature to -60 °C
Temperature deviation (time): ±1 K
Temperature deviation (spatial): ±2 K

Power connection: 400 V 3/N / 50 Hz
Power: 16.6 kW
Rated current: 28.0 A
Fuse rating: 32 A slow-blow
Protection class: IP22

Refrigerant, precooling stage: R404A
Refrigerant quantity, precooling stage: 4.0 kg
Refrigerant, cooling stage: R23
Refrigerant quantity, cooling stage: 0.6 kg / 10 bar
Operating pressure PS: 25 bar

Water-cooled version
Cooling water connection required
Compressed air connection required
Operation only possible with cooling water and compressed air
Cooling water inlet: 3–6 bar

Equipment

CTS control panel
Microprocessor-controlled control and monitoring system
Program operation
Digital setpoint and actual value display
RS232 interface
RS485 interfaces
Potential-free contact
Digital inputs and outputs
Hot and cold chamber
Mobile frame with screw drive
Test chamber / mobile frame made of stainless steel
Insert tray made of stainless steel wire
Hfjdpfx Aqozf Ibkjgjn
Pipe penetration NW 50 with sealing plug
Compressed air connection 1/4" male thread
Condensate drain R 1/2" female thread
Safety door locking
Lockable door with viewing window
Documentation / operating manual
Accessories according to images

Application areas

Temperature shock testing
Cyclic temperature testing
Material testing
Electronics testing
Component testing
Aging tests
Quality assurance
Research and development

Condition

Used
Optical condition according to images

Scope of delivery

1x CTS TSS-70/130 temperature shock chamber
Insert tray / test chamber equipment
Available documentation / documents
Operating manual
Accessories according to images

Important note:
For the safety of our customers, the following work will be carried out on the offered climate chambers in advance:
1. Functional check and replacement of any necessary components
2. If necessary, refilling with legally compliant refrigerant
3. Leak test with certificate
4. Documented test run after successful inspection

Objects,
machines or other accessories shown in the images
that are not explicitly described
are not included in the scope of delivery.

Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.

We are happy to answer any further questions by telephone.

The listing was translated automatically. Translation errors are possible.