Synchronous welding control

DALEX MPS 200 MULTI

Condition: used, Plug-in welding control in 19 " housing with quality assurance and 50 pograms Solenoid valve voltage: 24 V DC Gjlhccodga Nbjqqsbl complete with current measuring belt MB 260 FURTHER 19" CONTROL UNITS IN STOCK: E.G.: 8036 - 8036-S3 8033 8043

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs -Manufacturer: Dalex, spot welding controller type MPS 1033 1 TT -Spot welding gun: Type 3228-4 Gslhcjlzmxcecqqobl -Rated power: 16.0 kVA -Operation: by hand control -Transport dimensions: 1200/800/H500 mm -Weight: 85 kg

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and Gbolhedx Suhsccqqjl auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: excellent (used), CATALOGUE NUMBER 6911 TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter: - on the upper shaft 340mm - on the lower shaft 300mm - disc hole diameter 80mm from above: - deflectors - 2 sliding pressing shafts - pressure - shaft with 37kW saws - 2 smooth sliding shafts Gjlhskyr H Aoccqqjbl from below: - feed table + guide strip - deflectors - track - shaft with 37kW saws - track - 1 sliding, smooth, output shaft - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up/down 1.1kW - automatic central lubrication - electrically adjustable smooth regulation of feed speed 3kW - diameter of exhaust port 230mm, 250mm - dimensions length/width/height 3000x2300x1900mm - weight about 5000kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Net price: 178900PLN Net price: 42090 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Catalogue number 6809 TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm from above: - deflectors - pressure sliding shaft - deflectors - 2 smooth sliding shafts - deflectors - shaft with 75kW saws - 3 smooth sliding shafts - deflectors - smooth sliding shaft from below: - sliding roller - deflectors - track - shaft with 95kW saws - track - 1 output shaft, toothed, pulling - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the body upper top/bottom 1.1kW - automatic central lubrication - smooth regulation of feed speed 3kW - diameter of the exhaust nozzle 190mm, 200mm - feed table with guide and pneumatic clamp rollers in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length/width/height 6520x1300x1050mm - dimensions of the machine length/width/height 2850x2410x2170mm Gelhccslrvg Asqqjbl - total weight approx. 8000kg ADVANTAGES - Italian production - DTR documentation - two-shaft - with feeder - used multi-saw, very good condition Net price: PLN 197,900 Net price: EUR 46,560 depending on the price EUR 4.25 (Prices may change with with higher fluctuations)

Year of construction: 1985, Condition: refurbished (used), Cup grinding machine Make: GMN Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 with warranty Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual Gjlhjgayvqoccqqobl - used, as seen -

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm - disc hole diameter 80mm - shaft diameter 60mm - min disc diameter 250mm Gjlslrvgujhccqqebl - max disc diameter 350mm - max cut width 870mm - min cut length 1500mm from above: - pawls - pulling shaft, toothed, metal - pawls - pulling shaft, toothed, metal - pressure - shaft with saws - 2 pulling shafts, metal, pneumatically pressed from below: - guide - metal, sliding roller - pawls - caterpillar - shaft with saws - caterpillar - smooth adjustment feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the body up/down 0.55kW - electric adjustment of shafts with saws 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm - weight approx. 6500kg - Centering device included - toothed pulling rollers 3pcs - smooth pulling rollers 8pcs - motor 2×1.5kW - pneumatic top pressure - side pressure - dimensions L/W/H 4850/1100/1800mm - weight approx. 1000kg ADVANTAGES - production Czech - two-shaft - centering device - DTR documentation - year of production 2010 - used multi-saw, very good condition Net price: PLN 272,900 Net price: EUR 64,200 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 Gbelowcdt Hjhccqqol -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Year of construction: 2013, Condition: refurbished (used), CN MATRIX Machinable diameter 500 mm, machinable length 1016 mm, bar passage 65 mm, spindle speed 5000 rpm, rotating tools 12000 rpm, tool magazine 20 tools HSK 63, spindle indexing all degrees,MAZACC 3 D Conveyor Gslhccqeihp Iajqsbl

Condition: new, controler for resistance weldingmachines Dalex MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 --- MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1 --- MPS 300multiR1 Gelhopbbyuoccqqjbl available from stock

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm Gbjlhsqup Aneccqqol - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Year of construction: 1999, Condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Gbjljm H Urhehccqqjl

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 Golhccjdy Igzsqqebl - year of construction 2024 - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Year of construction: 2024, Condition: new, max. cutting height 200 mm max. cutting width 400 mm max. passage width 490 mm feed rate 5-30 m/min. sawing motors 2x 37 kW ( also more KW possible ) feed motor 2,2 kW Gslju I Dushccqqobl saw shaft diameter 70 mm saw blade diameter 325 mm weight 2.800 kg Basic equipment Electrical height adjustment of the upper rollers Special equipment Laser with adjustment device Driven roller gear Electronic braking device

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, motor voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 2 kW (2.72 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min Gbjlhccotvpfmoqqjl MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Year of construction: 2022, Condition: new, Two-axis multi-blade circular saw type 750 40/200 - Engines: 1x75 kW below, + 1x55 kW upper - min./max. cutting height: 40mm to 200mm Gslhccjgr D Hceqqebl - max. width of cutting board: 700mm - max. length of prism 3500mm or more - min.lenght of prism 1500mm - max. cutting width 600 mm - max. diameter of circular saw blade 350-400mm - max. Number of sheets on top axis: 10 pcs ø 350 mm - max. Number of sheets on lower axis: 10 pcs ø 350 mm - automatical movement with frequency regulator - chain conveyor after the blades + driven infeed conveyor with centrators + driven outfeed conveyor with ejection

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,500 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 200 cm 140 kg/arm META Multistrong Data : - H : approx. 200 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1300 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 200 cm made of IPE120. - 12 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. Gslhjwhm I Deccqqobl -- Available immediately Price : 1269,00 € net 1510,11 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 1995, Condition: ready for operation (used), A welding cell with Kuka robot is available. Robot: nominal payload: 30kg, max. payload: 36kg, reach: 2100mm, number of axes: 6, repeat accuracy: +/-0.06mm. Dalex welding machine: electrode force: 215-1290daN, rated power: 100kvA, throat depth: 250mm, stroke: 200mm, weight: 720kg. Gboletxbz Sshccqqol

Condition: good (used), Contact via WhatsApp or . Mulicar CMAR NC 200, diesel. Washing vehicle and high pressure cleaner (surface cleaner) with hot water. 4 wheel steering camera air conditioning lance with reel extra scater 4300 hours pictures and video available. HOT WASH SYSTEM / T REMO 601 LITER 2 X HIGH PRESSURE CLEANING PUMPS • 1 X PRATISSOLI-EKL20 250 BAR 37L/MIN • 1 X 60 BAR / 85L/MIN 2 X HIGH PRESSURE LANCE & DRUM CUENOD C/4 BURNER Geljuywh Dehccqqebl

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Gslhccqsvhqvgsqjbl We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), gearing type: other, axle configuration: 4x4, overall weight: 251 kg, empty load weight: 250 kg, maximum load weight: 1 kg, first registration: 09/2007, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Equipment: all wheel drive, * Dücker extension arm UNA 200 * The basic implement is used for mounting various implements * For mounting on the Multicar Golhcsvhpk Ajcqqjbl * Reach: 3.40 meters * Transport width: 1.65 meters * Weight of basic implement 250 kg * Displacement of 1.15 meters * Hydraulic drive allows the implement to be used on the left, right and in front of the vehicle. * Swivel angle of implement 140° * Year of construction: 2007 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), gearing type: other, axle configuration: 4x4, overall weight: 500 kg, empty load weight: 340 kg, maximum load weight: 160 kg, first registration: 09/2011, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Equipment: all wheel drive, * Dücker extension arm UNA 200 * The basic unit is used to hold various implements * Reach: 3.40 meters * Transport width: 1.65 meters * Weight of basic implement 340 kg * Displacement of 1.15 meters * The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive. * Swivel angle of implement 140° Gbolovhpkiohccqqsl * Year of construction: 2011 If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), mileage: 443,686 km, power: 173 kW (235.21 HP), first registration: 06/2012, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 265/70R19.5, fuel: diesel, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space width: 2,460 mm, loading space length: 6,800 mm, loading space height: 2,450 mm, Year of construction: 2012, Equipment: ABS, soot filter, tail-lift, = Additional Options and Accessories = - Power Brakes - Electric Windows - Electrically Adjustable Exterior Mirrors - High Beams - Speed Limiter - Tail Lift - Particulate Filter - Radio/CD Player - Side Door - Power Steering - Sunshade - Toolbox - Central Locking = Remarks = Refrigerator Brand: Thermo King = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 6,374 cc Drivetrain AdBlue System: Yes Transmission Transmission: Mercedes, Automatic Axle Configuration Tire Size: 265/70R19.5 Brakes: Disc Brakes Gelhccqsv Sbdcjqebl Front Axle: Steered; Left Tire Profile: 30%; Right Tire Profile: 30%; Suspension: Leaf Spring Rear Axle: Left Tire Profile: 80%; Right Tire Profile: 80%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 890 x 260 x 368 cm Weight Curb weight: 8,300 kg Payload: 3,690 kg GVW: 11,990 kg Functional Cooling: -22°C to 23°C Engine cooling: Diesel and electric Condition Technical condition: very good Visual condition: very good Damage: none

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Clamping unit Clamping force: 400 ton Gbolswgpwrehccqqol Opening stroke: 1008 mm Platen size (h x v): 1360 x 1460 mm Injection unit Screw diameter: 60 mm Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Hersteller: ENGEL Gbolhccqjwgpxieqsl Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg