Plate rolling machines DAVI MCA 3017 2004 May Deals 4 Rolls

DAVI

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 260 mm, roller diameter: 260 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 8,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,600 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Prebending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic proportional joysticks hydraulic motor driven roller rotation with axial gearbox each roll central independent Nodpfxoy T Exfs Akuslb front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect a support ---- Cleaned, controlled repainted , tested Machine in optimal working conditions ready for use. CE quality certification made in Italy . Manuals and schematics original documents with the machine.

Condition: ready for operation (used), 1 x Davi round bending machine / plate rolling machine / four-roll bending machine (Davi 4 roller bending machine). . Video available via WhatsApp/Messenger/Viber Nledpfoymnzbsx Akujb . Inspection welcome near D-24983 Handewitt . Further information upon serious interest

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Njdpswkaaljfx Akujlb Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration Nedpey N Rbwsfx Akuolb - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Nljdey I Uh Sopfx Akujb Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST Njdpfx Aey Ez A Rjkuslb diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, functionality: fully functional, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, DAVI Croqueuse Plate Rolling Machine Roll diameter: 180 mm Njdjy Emtnspfx Akuslb Rolling length up to 3 m Thickness up to 15 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 Nedpsy D Npiefx Akuolb nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Nodpfxoy D Ngzo Akuslb Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks Nlsdpfx Akjxacdveuob - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)