Universal machining center

DECKEL MAHO – DMU 50

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Rapid traverse rate X/Y/Z: 50 m/min Tedpfx Ao Agm Tbji Tod Tool holder: SK 40 Table: max. load capacity approx. 200 kg

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Tsdpfoz D Ab Tjx Ai Tjd Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment.

Condition: good (used), Year of construction: 2006, operating hours: 14,500 h, functionality: fully functional, FOR SALE MACHINING CENTER DMG DECKEL MAHO DMU 50 (5-Axis) Key feature: Only 14,690 actual spindle hours (PGM operation) for a 2006 machine. Mechanics are in very good condition. Main specifications: • Control: HEIDENHAIN iTNC 530 (with separate 3D screen) • Machining travels: X = 500 mm | Y = 450 mm | Z = 400 mm • Tilting rotary table: Ø 630 x 500 mm (B-axis: -5°/+110° | C-axis: 360°) Tedpfx Aj Af Ap Hji Ted • Max. table load: 200 kg • Tool magazine: 16 positions • Power supply: 400 V / Three-phase (Low consumption: 17 kVA) Included equipment: • Industrial precision vise (already installed and adjusted) • Separate electronic handwheel • Coolant system with adjustable nozzles Conditions: • Used machine, available for inspection in working order. • Removal and transport are the responsibility of the buyer. • Professional sale with invoice (VAT recoverable).

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Tsdps Afbv Sjfx Ai Tjd

Condition: repair required (used), Year of construction: 1999, functionality: not functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 310, table width: 500 mm, table length: 700 mm, table load: 200 kg, rotational speed (max.): 5,000 rpm, overall weight: 3,000 kg, spindle speed (max.): 5,000 rpm, spindle nose: SK40, input voltage: 400 V, DECKEL MAHO DMU 50 M CNC | Heidenhain TNC 310 | Year 1999 | Damaged For sale: Deckel Maho DMU 50 M CNC machining center from 1999, equipped with Heidenhain TNC 310 control. The machine is sold as damaged – it displays error 120202 during startup, therefore it is offered as a unit for repair or for parts. The error indicates a lack of connection to the PLC controller. Technical data * Manufacturer: Deckel Maho * Model: DMU 50 M * Year of manufacture: 1999 * Control: Heidenhain TNC 310 * Machine type: Universal CNC milling center (3+2 axes) Working parameters * X-axis travel: 500 mm * Y-axis travel: 400 mm * Z-axis travel: 400 mm * Table surface: 700 × 500 mm * Maximum table load: approx. 200 kg Tsdpfx Aio Adzt Is Ted * Spindle speed range: 0-5000 rpm * Spindle taper: SK40 * Maximum working feed rate: 5000 mm/min * Rapid traverse: 5 m/min ## Equipment * Heidenhain TNC 310 control * Manual tilting/rotary table: * B-axis: from -10° to +95° * C-axis: 360° * Cooling system * Safety guards ## Technical condition The machine is sold as non-functional. Error message 120202 appears during startup. The error has been discussed with a service technician, who indicates damage to the middle LT module - the module itself reports error 1. Repairing the module, depending on the extent of the damage, costs between 5,000 and 8,000 PLN. The machine is sold in the condition shown in the photos. Ideal for a service company, someone involved in CNC machine repair, or as a source of spare parts. It was in continuous use until October 2024. ## Additional information * Year of manufacture: 1999 * Weight: approximately 3000 kg * Power supply: 400 V * Loading possible. * Viewing by prior arrangement. Price: negotiable I will issue a VAT invoice. The stated price is the net price. Please contact me by phone and arrange to view the machine. Machine loading is not possible - sold without loading. We do not have a forklift with the appropriate lifting capacity.

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm Tjdpfxe Admbwe Ai Ted NC rotary and tilting table Chip conveyor

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, DMU 50 Evolution 32 tools Tjdpfs Abbl Eex Ai Tsd Tool breakage monitoring Millplus Indunorm Ultralight automation system with 24 vises (year of manufacture 2010)

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Tedpju Idffsfx Ai Ted Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: excellent (used), Year of construction: 1998, Control system: Heidenhain TNC 124 Travel ranges X/Y/Z: 500 x 400 x 400 mm Spindle speed: 4,500 rpm Tedj Aa D Dhjpfx Ai Tjd Tool holder: SK 40 Manual rotary table with tilting axis: 700 x 500 mm

Condition: good (used), Year of construction: 2013, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: Sinumerik, table load: 200 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DECKEL MAHO DMU 50 Ecoline Year of manufacture: 2013 Control system: Sinumerik 840D Operating hours: 21,000 hours Technical data: Spindle speed: 10 - 12,000 rpm Drive power: Internal cooling system pressure: 12 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: +5/-110° Tjdpfxez Td Arj Ai Tod C-axis: 0.001° Accessories: - Chip conveyor - Coolant system, 12 bar Further data and images will follow. All technical specifications are without guarantee.