Universal Milling Machine

Deckel FP 2

Condition: used, Year of construction: 1970, x-travel 400 mm y-travel 220 mm z-travel 350 mm table surface area 700 x 330 mm spindle taper SK 40 Ielhowk N Nvsccqrsat spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,5 m/min total power requirement 3,0 kW weight of the machine ca. 1,2 t - machine out of teaching shop - Accessories: solid table, univ. table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, dividing unit with 3-jaw chuck, slotting head, counter bearing, various tool fixtures, original DECKEL tool cabinet

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Ioljwi H Hcohccqrsat Adjustable angle table Vertical milling head can be swiveled

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Iaelhechfyfeccqrot Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: used, 1 piece universal milling machine Deckel type FP 2, company Deckel type FP 2, serial no. 2200-2955, t-slot clamping table approx. 300 x 700 mm with machine vice Iajlowkupushccqrst

Condition: used, Year of construction: 1977, x-travel 400 mm y-travel 200 mm Iaslhev N N Nnoccqrst z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min surface area 700 x 330 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min Iaelom Uygvehccqrst drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1970, Weight: approx 2 t. dimensios: 1 x 1 x 1,5m Ielhcstfgt Escqrjat *

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition Iaelhjwbi Rbsccqrst DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Ijlhsfzk Hfoccqrsat Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: good (used), Year of construction: 1986, CNC milling machine Deckel FP 2 CNC year 1986 X/Y/Z 300x300x400 mm 2, KW drive power feed 4000 mm /min Control Dialog 4 Islhccjtvmk Uoqrsat Table 600x325 with 5 T-slots Tool holder SK 40 Speed 31.5 -3150 rpm

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm table surface area 670 x 390 mm spindle taper ISO SK 40 spindle turning speed - stepless 40 x 2500 U/min quill stroke 70 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,3 x 1,95 m Toolroom milling machine (Ma. No. 8729) with: - 3-axis active digital readout Iaolhcowb Hzkecqrjt - Universal milling head - Tool table - Steel cover for Z-axis - Chip guard - External control cabinet

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm Iaolhccqeh Ty Hksret turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: excellent (used), Friedrich Deckel FP 2 LB tool milling machine The accessories are not included in the scope of delivery, but can be purchased additionally. This universal milling machine FP 2 LB from the renowned German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable base body and is designed as a moving column machine, i.e. the machine does not lose accuracy if heavy parts (up to 1000 kg) are clamped. Another special feature is the so-called inclined bed of 45 degrees. This makes it possible, after dismantling the universal table, to clamp and machine especially V-engine blocks with 90-degree cylinder angle (e.g. American V8) directly. The long traverse path 800mm is also an advantage in this case. Cover FP 2 LB universal swivel / tilt table (± 45° / ± 15°) Iaolhccjgyw S Tjqret Lid universal dividing head Vise 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm Transport possible on request. Please also note our other offers. Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Drilling and milling head for lid milling machine Iaelhccqsv U A S Hjrot

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Islhsfcqfpsccqrsat Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: good (used), Sturdy angle table, manufacturer unknown, Support surface 700 x 260 mm 5 T-slots Iaslhccqov N Euysrjt

Condition: good (used), used universal tool milling machine make DECKEL type FP 2 travel X: 400 mm Y: 200 mm Z: 400 mm table size 700 x 285 mm spindle mounting SK 40 - S20 x 2 spindle speed 40 - 2000 rpm. 18 steps feed rate 8 - 400 mm/min. 18 steps pinol stroke 60 mm motor power approx. 2,2 kW mains connection 380 volt, 50 Hz - vertical milling head swiveling, with pinol shift 60 mm - Control cabinet adjacent space requirement L x W x H 1300 x 1200 x 1650 mm Ijlhjmnqbheccqrsat weight approx. 1200 kg good condition there is the possibility ,after agreement, the machine with receptacles accessory cabinet milling fixtures and other original cover accessories accessories.

Year of construction: 2019, Condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Iolevf Iy Dehccqroat

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 Iaslhourk Exsccqret -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: good (used), Year of construction: 1970, 1 x universal milling machine cover FP 2 with 2 - axis digital display (X + Y) in very nice condition. With large accessory package + original lid tool cabinet. Technical data follow. The machine can be inspected under power. Iolhcceunlffoqrsat

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - partially overhauled, newly painted RAL 7035 light gray / RAL 7046 telegray2 / RAL 5008 gray-blue Mach. no.: 7138 Milling head type: 2013 Milling head number: 2013-2856 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. Geometric acceptance with test report Accessories: Ioljhqg Tlohccqrjat - 3-A digital display EASSON ES-8A, as good as new - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40, long version with tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: used, Year of construction: 1987, x-travel 300 mm y-travel 300 mm z-travel 400 mm Iaslhceunuu Nocqrot Control Dialog / Contour 3 total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*3*2 m Package price: 3 x DECKEL FP 2 EXW free lorry Stock no: 5267 FP 2 A Contour 3 5268 FP 2 A Contour 3 5290 FP 2 NC Dialogue 2

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) stepless reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - central lubrication, manually operated - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons, potentiometer for feed control Iaelhccjvfdatoqrot - new documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool milling machine Ijlhjdvdczjccqreat Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee Ijlhccjd Tytyjqroat geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-