Assembly plate,Mounting Plate

DEMAG

Condition: good (used), Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow rate: 35.1 m³/min -Max. pressure: 7 bar Bledpfx Aswu Axlofqep -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Blsdpfx Afs Ahrw Ujqsp terms of payment: 100% prior to delivery

Condition: good (used), functionality: fully functional, Column crane, manufacturer Demag, type ZSL 1600-3, year of manufacture 2001, load capacity 1600 kg, with Demag chain hoist. Overall height approx. 3 m Lifting height approx. 2.5 m Outreach approx. 3 m Disassembled, available from stock. Bledpj Ahrw Refx Afqjp

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Bsdpjzd Urtefx Afqelp Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS Bjdj Ahkfkepfx Afqslp In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Bledoyzylvepfx Afqep Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: used, 1,450 rpm, 28.7 kW Bedszr H Trepfx Afqolp at 2 bar, 580 m³ volume flow 37 kW electric drive

Condition: used, New: No VAT/margin: VAT qualifying Serial number: C43080 Fits to following machines: Demag Blodo Ahb Dbopfx Afqep Please contact Sjoerd Overbeek for more information

Condition: used, New: No VAT/margin: VAT qualifying Blsdpfx Ao Ag Hwxjfqop Serial number: 2665593 Fits to following machines: Demag Please contact Sjoerd Overbeek for more information

Condition: used, Year of construction: 2022, overall weight: 300 kg, load capacity: 125 kg, Used pillar-mounted slewing crane from DEMAG, type KBK. The crane has a load capacity of 125 kg, an outreach of approximately 2,900 mm, and an overall height of approximately 4,000 mm. The lower edge of the jib is at approximately 3,500 mm, and the highest hook position is at approximately 3,250 mm. Bledpj Agxf Defx Afqjp The system is equipped with a Demag DC-PRO 1-125 1/1 H5 V8/2 electric chain hoist, manufactured in 2022, with a load capacity of 125 kg and a lifting height of 5.0 m. The chain hoist has two lifting speeds of 2.0 and 8.0 m/min, FEM class 4m / M7, and a power rating of 0.18 kW. In addition, the system includes a mechanical Rieder box handling gripper with a load capacity of 45 kg and a GROHMANN ENGINEERING MP02 handling gripper with a permissible load of 45 kg. Condition: used, stored in disassembled condition.