Hoist motor KBH 160 B2/12

Demag

Year of construction: 2014, condition: used, Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible. Itjdsz Dkh Ijpfx Aqcsl

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Itsdoq R Rf Aopfx Aqcol

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Itodpfoz Dkh Uox Aqcel

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control -Type: DST7SP222 BE -Identification number: 874 558 44 Iedpfxeyzyyas Aqcetl -Buttons: 1x emergency stop, 6 buttons 2-stage -Transport dimensions: 590/94/H90 mm -Weight: 2.4 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, power: 22.5 kW (30.59 HP), Equipment: documentation/manual, We offer a mobile, screw-type diesel compressor – CompAir Z30/B. Output: 22.6 kW – 3000 l/min. The compressor has undergone an oil, filter, and air separator replacement. The compressor is in excellent condition, fully functional, and free of defects. Large and small service manuals are included. Iedpfx Aqez Dik Uscjtl Operating hours: 3595 Year of manufacture: 2004

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Itodjz Dibmopfx Aqcol Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Itedpfx Aqez Dhnrocel Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Year of construction: 2008, condition: used, A hydraulic injection molding machine is offered. Tie-bar spacing: 520mm x 520mm, clamping force: 1700kN, locking force: 1870kN, max. opening stroke: 500mm, mold height min./max.: 275mm/585mm, screw diameter: 45mm, injection pressure: 1914bar, shot weight: 294g (PS), centering ring: 160mm, oil tank capacity: 400l, control: NC5. Equipped with robot system DR721-1278 (Wittmann W721, year of manufacture 2008, travel X/Y/Z: 550mm/1000mm/2000mm), 8-zone hot runner control, 8 cooling connections, 2 core pulls. Weight: approx. 6900kg, overall dimensions X/Y/Z: approx. 5300mm/1600mm/2000mm. Inspection is possible by prior arrangement. Itodpfx Aqoz Da Nuocel

Condition: used, functionality: unexamined, Single-girder overhead crane Demag, load capacity 3.2 t. Box girder with Demag electric chain hoist as a trolley running on the lower flange, power supply via trailing cable, control cabinet at the crane end. Isdpfx Aqjz A Upmjcotl Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading subject to agreement. All information without guarantee.

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Itjdpfx Aeyg Eu Sjqcol Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane Itsdpfx Asz Anwtjqcel -Manufacturer: DEMAG, geared motor type 13/6 PF 8/2 -Power: 0.07/0.27 kW -Speed: 680/2900 rpm -Wave: see photos -Protection rating: IP54 -Dimensions: 270/210/H235 mm -Weight: 12.7 kg