Travel motor KBF 125 A8-2

Demag

Condition: good (used), functionality: fully functional, power: 150.78 kW (205.00 HP), fuel type: diesel, fuel tank capacity: 300 l, overall weight: 53,523 kg, maximum load weight: 112,000 kg, Year of construction: 2006, machine/vehicle number: 506081, Equipment: cabin, crane, hydraulics, USED DEMAG CRANE FOR SALE Knodpfx Aksumqy Eowob DEMAG CRAWLER CRANE MODEL: A600 C YEAR OF MANUFACTURE: 2006 Good Working Condition Machine sold as its Condition For More details please Contact Vijay JPN Industrial Trading Pte Ltd, 13A, Pandan Crescent, Singapore-128478

Condition: good (used), functionality: fully functional, 3 DEMAG single-rail traveling hoists, complete, all identical in design with DEMAG hoisting unit, type DH316 H12 with hoisting motor KBH140 B2/12 Gear ratio i=85 Hook travel 6m Main lifting speed 6.3 m/min Knjdpsv Uvu Ujfx Akwsb Fine lifting speed 1 m/min Load capacity 6.3 tons Reeving 4/1 very good used condition, price per unit 3 units for €13,900.00 net numerous hoisting units in stock Info: we have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Also, check out my other offers from my stock!

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Kodpfx Aksr E Ht Hswonb Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Kjdpfx Asxmd Rdskwonb Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Item location: 75053 Gondelsheim System is completely disassembled and immediately available See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned for a Demag P hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads Kjdpfx Aoh Uqccjkwenb

Condition: used, functionality: fully functional, Year of construction: 1978, machine/vehicle number: ROD43, 1 Demag KBK II wall-mounted jib crane, 250 kg payload / lifting capacity Jib length 5 m, 125 kg payload Knsdpfxexmuugj Akwjb Fitted with Abus GM chain hoist, 125 kg capacity – Year 2023! Weight incl. wall bracket (recent date) approx. 350 kg Complete with chain hoist, cable trolley, travel gear, and small parts Slewing range 270° Item location: 75053 Gondelsheim The unit is fully dismantled and immediately available Shipping by freight carrier or local pickup Please inquire for shipping costs by postal code

Year of construction: 2014, condition: used, Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible. Kedpfx Akez Dkh Ijwonb

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Kedpov T Tf Ujfx Akwsnb Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Kedpfx Ajz Dkh Uekwonb

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, power: 22.5 kW (30.59 HP), Equipment: documentation/manual, We offer a mobile, screw-type diesel compressor – CompAir Z30/B. Output: 22.6 kW – 3000 l/min. The compressor has undergone an oil, filter, and air separator replacement. The compressor is in excellent condition, fully functional, and free of defects. Large and small service manuals are included. Operating hours: 3595 Knedpfxsz Dik Us Akwob Year of manufacture: 2004

Condition: new, DEMAG brake ring / brake pad / conical brake pad - 50 pieces (new). 1. Type: KB 160 - 2 pieces. 2. Type: KB 100 - 2 pieces. 3. Type: KB 200 - 2 pieces. 4. Type: KB 140 - 2 pieces. 5. Type: KB 125 - 5 pieces. 6. Type: KB 112 - 1 piece. 7. Type: KB 90 - 2 pieces. 8. Type: KB 80 - 11 pieces. 9. Type: No. 405 - 1 piece. 10. Type: No. 616 654 - 5 pieces. Knsdpjyy Takjfx Akwsb 11. Type: No. 620 606 - 7 pieces. 12. Type: No. 612 648 44 - 6 pieces. 13. Type: No. 628 626 44 - 2 pieces. DEMAG brake cover / brake lid - 38 pieces. Various sizes (new / used).

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Kedpfsz Dibmjx Akwonb Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Kjdpfx Aksz Dhnrswenb Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: like new (used), functionality: fully functional, DEMAG brake set, light, wide KB80/KB100/KB125/KB140/KB160 for DH and P hoists Other motors KBH / KBF / KBV / K-Motor, spare parts, brakes, and much more available on request. Kedpfxoxxrvro Akwjnb Send us an email or give us a call. Invoice incl. VAT.

Condition: used, functionality: unexamined, Single-girder overhead crane Demag, load capacity 3.2 t. Knodpfsz A Upmjx Akwsb Box girder with Demag electric chain hoist as a trolley running on the lower flange, power supply via trailing cable, control cabinet at the crane end. Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading subject to agreement. All information without guarantee.