Hoist motor PL160 20/14PL4-16

Demag

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Lredps Afbz Usfx Al Tju Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Ljdpfjvamq Djx Al Teru

Condition: excellent (used), Year of construction: 2001, 1,000 shots used injection molding machine with robot, safety fence, and conveyor belt Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Tie bar distance: 400 x 400 mm Screw diameter: 35 mm Lodpfxo Afbx To Al Teru Max. injection volume: 168 cm³ Shot weight: 150 g/shot Control system: NC4 Equipment: - Robot, Engel, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt - 2 x core pull - Blow valve

Condition: excellent (used), Year of construction: 2017, operating hours: 34,007 h, functionality: fully functional, Equipment: documentation/manual, DEMAG 280 ton injection molding machine Lsdpfx Alo Ad Ii Ae Teru

Condition: good (used), Year of construction: 1970, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, wall-mounted jib crane, lifting capacity 1000 kg -Projection: 5070 mm Lredps Adzazefx Al Tsu -Swivel range: 270° -Chain hoist: DEMAG type PK5NF -Main stroke: 5.0 m/min -Fine stroke: 1.25 m/min -Hook travel: 4300 mm -Transport dimensions: 5300/1310/H400 mm -Weight: 316 kg

Condition: used, Year of construction: 2000, screw diameter: 95 mm, clearance between the columns: 1,000,900 mm, injection pressure: 1,832 bar, injection weight: 2,550 g, mold height (min.): 450 mm, ejector force: 138,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, total length: 10,100 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 33,200 kg, Demag Ergotech 650/1000-5200 system Year of manufacture: 2000 Control system: NC4 Injection unit 5200 - Screw diameter: 95 mm - Specific injection pressure: 1832 bar - Injection volume: 2835 ccm - Injection shot weight: 2550 g - Pump motor power: 74 kW - Cylinder heater power: 43 kW - Screw L/D ratio: 20 Mold closing unit 6500 - Clamping force: 650 t - Mold plate dimensions: 1450 x 1350 mm - Distance between tie bars: 1000 x 900 mm - Ejector force: 138 kN - Mold height: 450 mm - Opening stroke: 930 mm - Maximum mold plate distance: 1880 mm - Ejector stroke: 300 mm Lredpfxo Adp Elo Al Tju Electrical connection (fuse): 1300 A Weight: 33200 kg Dimensions (m) length x width x height: 10.1 x 2.5 x 2.6 m Equipment: - NC4 control system with color screen - Screw Ø 95 mm, L/D 20 - Injection, holding, and packing pressure adjustable by servo valve - Core pull system with 4 circuits on proportional valves on the moving platen - Hot runner control with 8 zones - Hydraulic control for hot runner nozzles (1 valve) - 10-circuit water distribution manifold with temperature indication - Pneumatic ejector - Additional fine oil filter in the bypass - Interface for a host computer

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 800,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Lodpfx Als Adpt Ae Tsru Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm - Ejector stroke: 230 mm Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Year of construction: 2011, SUMITOMO shi-Demag Systec 120/470-430 Closing force: 120 tons Year of manufacture: 2011 Control system: CDAIS Lrjdpfxj Acf Rhs Al Teu Mold opening distance: 47.5 x 47.5 Installation height: 250 mm Operating hours: 38,877 hours Screw diameter: 40 mm Injection volume: 231 cm³

Condition: good (used), Year of construction: 2005, Demag Extra 130-430 Closing force: 130 tons Lredps Acdnrjfx Al Tsu Year of manufacture: 2005 Control system: CDAIS Die space: 47.5 x 47.5 Scrow: 40 mm Displacement: 231 cm3

Condition: used, Year of construction: 2002, A crane with chain hoist is offered. Lifting capacity: 800kg, hook travel: 3m, main hoisting speed: 4m/min, fine hoisting speed: 1m/min. Inspection possible by arrangement. Lrsdpfx Aj Aba Skol Teu

Year of construction: 1992, condition: used, Technical details: Ljdevbh Rhspfx Al Toru lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *