Creep speed Unit FG20 13/6P4

Demag

Condition: used, DEMAG TYPE 13/6 PF 12/4 Pgsdpfxjzm Ezws Aflep

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Pgedpfxoxhfuas Aflop Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Podpfx Aezp Ew Deflogp - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, Year of construction: 2019, Injection molding machine, Demag El Exis 1000/1195-6300, manufactured in 2019. Pgjdpfx Afjzp D Stoljp

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Pjdpsyugctefx Aflsgp Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Pedpfx Aeyugalefljgp Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Pgedpjww Idlofx Afljp Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Pgsdpfx Afozpbufslep Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), Year of construction: 2010, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, Column jib crane type D-MS360, lifting capacity 3200 kg -Base plate: Ø 810 mm -Load capacity: 3200 kg Pedozpaq Eepfx Afljgp -Chain hoist: Demag type 2M EKDR 3, year of manufacture 2010 -2x lifting speed: 6.0/1.0 m/min -Drive system: yes -Swivel drive: yes -Projection: 4480 mm -Total height: 5060 mm -Hook height: 5040 mm -Swivel range: 360° -Transport dimensions: 1200/5500/H2260 mm -Empty weight: 1850 kg

Condition: used, total height: 1,200 mm, total length: 16,640 mm, total width: 3,510 mm, Colour: Yellow Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 13/6 KF2 Pgedpfezn H N Sjx Aflep - Lifting capacity [kg]: 3000 - Span [mm]: 16600 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 16640mm x 3515mm x 1200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum