Crane system

DEMAG

Condition: excellent (used), Injection moulding technology module: TX DIAS RX DIAS PLUS..... Pjdpfoqxdnljx Afpepp 2 pcs control cards Demag

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: Pjdex Tdp Nepfx Afpepp 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Ppjdpfewd Hhcjx Afpjp Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: used, functionality: fully functional, Year of construction: 2009, Span: 35 m Load capacity: 130 tons Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane Psdjt D H H Aepfx Afpepp

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Ppsdpfx Afsyxrt Topjp

Condition: used, Year of construction: 1978, Technical details: Ppjdpfeu Szhpjx Afpsp lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. *

Condition: excellent (used), Year of construction: 2001, clamping force: 600 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, mold height (min.): 200 mm, Technical data General information: Year of manufacture: 2001 Control system: NC4 Weight: 3,950 kg Dimensions (L × W × H): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1,995 bar Injection volume: 106 cm³ Shot weight: 94 g Pjdpfx Aoyxnumefpspp Clamping unit: Type: 60 / … Clamping force: 60 t Platen size: 600 × 600 mm Tie bar spacing: 420 × 420 mm Mould height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Condition: good (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Ppjdpfxjyxlzdj Afpop Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag type: NC4 Ppsdpfx Ajyxg Swofpop spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, overall weight: 3,000 kg, total length: 11,370 mm, total width: 2,492 mm, load capacity: 10,000 kg, working height: 10,000 mm, lifting height: 10,000 mm, Equipment: documentation/manual, Demag Overhead Crane – Type: single-girder – Capacity: 10,000 kg – Lifting height: 10 m – Year of manufacture: 2013 Ppsdpoyxgu Esfx Afpop – Hoist type: wire rope hoist – FEM/ISO classification: 1 Am – Manufacturer: Demag Dimensions – Span: 11,370 mm (center-to-center) – Installation height: 834 mm – Wheelbase: 2,000 mm – Overall width: 2,492 mm including buffers – Suitable for crane rail: 50×30 mm – Dead weight: 2,954 kg Speeds – Hoisting: 4/0.7 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: radio remote control – Crane manual available: yes – Condition: in very good condition – Dismantled: yes Optional – Crane power supply – Crane beams with crane rail 50×30 mm – Transport to your location (unloaded or unloaded with a truck-mounted crane) – Customization of the crane by a NEN-EN 1090 certified steel construction company