Machine for testing diesel injectors CR

Dieselland CR JET 4 -Triumph

Condition: used, Small character inkjet printer -Machine: has not been checked and is sold as a spare parts carrier -Dimensions: 500/600/H1750 mm Lh9Or -Weight: 40 kg

Condition: used, Year of construction: 2014, Cutting length horizontal: 4.200 mm Cutting length vertically: 2.200 mm Cutting depth: 60 mm Brl8Twypmva Stop length: 4.200 mm Saw blade diameter: 250 mm Main motor power: 3 kW Automatically evading slatted frame for horizontal cut: Yes Dust-emission tested TRK: Yes Machine length: 5.600 mm Transport height: 2.600 mm Conformity marking: CE mark Space requirement Length: 5,6 m Space requirement Width: 3 m Space requirement Height: 1,7 m

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth Bhdwvxp7Zg - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW Gxc7E2I weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head with drilling quill * Central lubrication * Coolant equipment * Documentation/manual

Condition: good (used), Year of construction: 2003, FUNCTIONAL, GOOD U2Blivhxv9

Condition: good (used), Year of construction: 2002, 2 vertical centers EUMA ME -810S twin pallets FANUC 18M 2 vertical centers HYUNDAI KIA FANUC OM Dps7St

Condition: excellent (used), Year of construction: 2019, Operating hours: 360 h, Functionality: fully functional, Single-sided edge banding machine / automatic edge banding machine Uz0Guriybv Felder / Format 4 Type Tempora 60.12 Year of construction 2019 Only approx. 360 operating hours Single-sided edge banding machine Workpiece height: approx. 8 - 60 mm Roll edging material: 0.4 - 3 mm Strip material: approx. 10 mm Workpiece length: min. 140 mm Edge thickness: max. 8 mm Equipped with: Turntable edge magazine, diameter 800 mm Strip magazine for 12 pieces of 10 mm edgebands - Infrator IR heating lamp for preheating the panel edge - Glue unit for 1.5 kg EVA granulate, Teflon-coated, pneumatically controlled - Snipping unit with 2 motors / impact shears for roll edging material - Fine trimming 2x 1.5 kW, speed 1200 rpm - Combination trimming unit top+bottom Flush and radius trimming unit e-motion, each 0.75 kW (1 HP) 12000 rpm. - Radius scraper top+bottom - Buffing / polishing station top+bottom - Release agent and cleaning agent information Chain feed with segmented and rubberized support pads with quick-change system Feed rate 12 m/min, 1.5 kW 21 inch Smart-Touch control unit (instead of standard 10 inch) Control system: e-Motion Electrical system 3x 400 V, 50 Hz

Condition: used, Year of construction: 2018, Length of sliding table: 2.800 mm Cutting width: 1.720 mm Cutting height max: 202 mm Saw blade diameter max: 550 mm Cutting height with scoring saw: 127 Scoring aggregate: Yes Rotation speed steps: 3 Main motor power: 5,5 kW Controlled axes: Yes Number of controlled axes: 2 Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Scoring saw height adjustment: manually Scoring saw width adjustment: manually Uad7Bw2Zej Scoring saw cutting width: Spacer discs FELDER X-Roll: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 7,35 kW Space requirement Length: 7,455 m Space requirement Width: 5,154 m

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) Ibkj8N9 - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, We offer here a complete dry ice blasting machine from Cold Jet with blasting cabin from MHG and filter, absolute top condition! The system consists of: 1. Cold Jet i³ MicroClean 2A0169-G2-M 2. transport trolley and ice box Cold Jet 80747-001-A 3. replacement ice box 3Z0083 4. blasting hose package 2N0455 G2 5. microClean applicator 2E0881 6. blast cabinet MHG SMG Junior/1-603/0,48-DT 7. MHG filter system The i3 MicroClean dry ice blasting unit 2A0169-G2-M For precision cleaning - Stainless steel rotor - Minimum noise level - Easy maintenance with removable front panel - Increased blasting pressure - For 127 x 127 or 150 x 150 mm ice blocks (quick change through inserts) - Now uses pellets & nuggets with one upgrade - Pneumatic circuit regulates pressure loss pressure loss and reduces moisture buildup - Integrated grounding cable in the hose prevents static electricity charging - Durable burst-proof blasting hose hose with protective cover (Urebrade or silicone hose available) - Transport trolley for maximum mobility - Temperature range (TS): -10°C to +80°C - Year: 2017 - Maximum pressure (PS): 10 bar - Volume: 8.5 liters Data from Cold Jet 2A0169-G2-M: - Serial number: 10172-MC - AC voltage: 220 V - Amperes: 5 - Phase: 1 - Frequency: 50/60 Hz - Power: 1/4 HP - Amperes at full load: 1.2 - Motor amps: 1.1 - Short-circuit interruption capacity: 800 A - Short circuit current capacity: 13.8 A - Maximum operating pressure: 140 PSI / 9.7 BAR - Shipping weight: 137 LB / 62 KG - Date of manufacture: 10/17 - CE marking: 3P0451-J Blast cabinet MHG Data of MHG SMG Junior/1-603/0,48-DT: Hu3Ujyc - Order number: 2017 - 104508 - Serial number: 8604 / 05 / 17 - Machine color: RAL 7035 - Power supply: 230/400 V - 50 Hz - Phases: 3 phases + N + PE - Rated current (L1 / L2 / L3): 0.7 A, 0.7 A, 0.7 A - Fuse protection: 3 x C 16 A - Certification: TÜV Rheinland ISO 9001:2008, SCC

Condition: good (used), Year of construction: 2010, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Bn3Za3M8Ynw

Condition: excellent (used), Leadermac 423 Compact 14/24 4-side planer Technical specifications: Max planing width: 230 mm Max planing height: 130 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: Iswikce bottom 5.5 kW right 5.5 kW left 5.5 kW top 7.5 kW Each spindle on a separate motor Toothed roller in the countertop in front of the first head Number of top steel pulling rollers: 6 Number of top rubber pulling rollers: 2 Electronic adjustment of workpiece dimensions Infinitely adjustable feed rate Feed on gimbals Automatic rogrammable work table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 3900 mm Width: 2200 mm Height: 1900 mm Net price: 86 000 PLN

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: CW2000 4/1 2024/10, Laser power: 2,000 W, Type of input current: AC, 4 in 1 laser device with a power of 1500 to 3000w - Cleaning of rust, oils, dirt, paint removal from metal surfaces, machines -Cutting of metals -Cleaning of welding seams The device is NEW and is configured and adjusted according to customer requirements! - Air price approx. €1345 / 2 weeks Ctdndmvo2G The configuration and price depends on the customer's requirements and area of application. We offer professional training in handling the devices in accordance with the UAVA / UVV in Austria and Germany. As we are service providers and work with the devices, we can also guarantee that they will work. We offer comprehensive instruction on site or in our workshops or customer-oriented demonstrations.

Condition: ready for operation (used), Suitable for foils, laminates, plastics, metals, cardboard, glass, vertical resolution: 48 pixels, connected load: 100VA, weight: 20kg, on-site inspection is possible. Hu3Snjw

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Bfvqg039Uj - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors D7V29Os Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: used, Year of construction: 2018, Functionality: fully functional, The used 2018 Format 4 Kappa Automatic Classic Beam Saw, currently located in The Netherlands. Crafted for excellence, this beam saw boasts a cutting length that flexibly spans 3200/4300 mm, complemented by a substantial 320 mm saw blade diameter, cutting through wood with unmatched precision. Equipped with a powerful 7.5 kW motor, it ensures robust performance across various applications. Technical specifications: Cutting length: 3200/4300 mm Saw blade diameter: 320 mm Saw blade projection: 68 mm Scoring saw blade: 150 mm Ule92Pzjtr Variable feed speed adjustment: 1 - 40 m/min Motor power: 7.5 kW Electrics: 3x 400 V, 50 Hz Weight: 3900 kg ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: used, Operating hours: 6,895 h, Functionality: fully functional, We are selling our Flow waterjet cutting system Gpfbdk Cutting area: 4x2m Pump: 6000bar 2 cutting heads (1 disconnected) lots of accessories (value approx. 20.000€) 2 cutting heads etc. This was put into operation by Flow in March. The major pump maintenance was carried out at the end of March (just under €40,000) and it has run for approx. 300 hours since then. Flow came back in August and replaced various seals and valves on the pump. All operation reports are available. Control system for automatic sand supply new New air conditioning units in control cabinet incl. software Please contact us for further information. Sold due to new acquisition. Crane + forklift available for loading.

Year of construction: 2016, Condition: used, *Sale price-valid until 30.11.2024* Used machine Cross sanding machine Year of construction 2016 Bka09Wjg7Uw Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table Fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable from the control panel via inverter Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Sanding belt oscillation electro-pneumatic

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package 6 packages available 95 Euro per package Hjrpitp

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm 12 cantilever arms with 1,000 mm depth, standard Bfr8Aplf7D Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm Bb2Felr - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish By2Jzhxi Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: as good as new (ex-display), Year of construction: 2023, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. Burca0Znkz The material is sensibly packed to enable easy unloading. The substrate must be concrete, level, suitable for dowels and capable of bearing the loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. Stmez8 The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.