Continous Finger jointing press

DIMTER DKV III Speed max. 80 m/min

DKV III Throughfeed Press with Brake Unit
Refurbished
Available either with original hydraulic motors or converted to servo motors
Options:
- Chain threading device
- Traveling cross-cut saw

Function:
For pressing finger joints without stops (in continuous operation).
The upper and lower plate chains provide feed force.
Following brake plates transfer the required longitudinal press force to the wood via friction.

Advantages:
- High output despite relatively slow feed rates
- Absolutely no vertical finger offset at the joints

Technology:
Heavy-duty 2" plate chain, pneumatically lift/lowerable
Floating brake elements
Pressing force measurement via contact manometer
Njdpfov T Aqyex Ac Helk
Height adjustment electric

Maximum pressing force adjustable and dependent on feed speed and wood cross-section,
4500 daN at 32 m/min
2200 daN at 70 m/min

Feed speed adjustable 10-70 m/min
Drive power
Feed unit adjustment 1 kW
Brake adjustment 1 kW
Hydraulic motors 45 kW

Technical data:
Wood width 90 - 180 mm
Wood thickness 20 - 80 mm
Thickness-width ratio 6:10

Wood cross-section for 15/16.5 mm fingers max. 90 cm²

The listing was translated automatically. Translation errors are possible.