Automatic Sample Extractor

DIONEX ASE 350

Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature
Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module.
Additional equipment offered with the extractor:
- Extraction cells with a volume of 22 ml – 6 pcs.
- Bottles for solvents with a volume of 2 l – 2 pcs.
- Bottle connections with caps – 2 pcs.
Date of purchase: December 2015
The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material.

1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided.

2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A.
Rodewm Arijpfx Agiel

3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa.

4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN.

5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

The listing was translated automatically. Translation errors are possible.