PVC Line 30 Windows

Diverse Hersteller

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: Cfwjv9Ltnw 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Year of construction: 2019, Condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Bpein Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Condition: used, Total weight: approx. 235 kg Lot of electronic components Some new, used, defective or electrical scrap. Contactors, transformers, braking devices, power supplies, limit switches and much more. Incl. pallet and 2 x mounting frames Dpn9Dl

Condition: used, Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 5 pieces bunker belts for the storage of the individual sorting fractions 1 piece semi-automatic truck loading station for walking floor or container trucks 1 piece swivel distributor conveyor for stockpiling material as piles 1 piece baling press, 150 t pressing force, manufacturer Europress, type EP5 150 V5 Miscellaneous conveyor technology consisting of chain belt and sliding belt conveyors 1 piece dedusting system with backwash function for the filter cartridges, manufacturer Impact Air Systems Ltd. Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant is ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. During dismantling, the owner can sporadically provide logistical support with forklift trucks, wheel loaders and excavators. The bid of the prospective buyer shall be submitted for the entire plant or individual components. This bid always includes the dismantling of the machines and equipment as well as their loading, removal and broom-clean handover of the hall. Technical documentation for the plant and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) are available exclusively in German. An inspection of the plant is possible after sending the complete company data ("self-disclosure") of the prospective buyer and a subsequent credit check by arrangement. Dqj8Gf We accept no liability for the technical details or any errors.

Condition: used, A machine package for the production of rungs and frames, consisting of: .: 600074 [] Miter assembly machine Himmel type HF120 .: 600076 [] Cross rung milling machine Omga type TI.189 NC .: 400187 [] Double miter saw Omga TRF 527 VIS .: 400188 []Miter saw Omga T 55 300 .: 400189 []Digital length stop Omga BR Drgcxb

Condition: not inspected (used), Functionality: unexamined, Hello, Various machines and containers are for sale, including: -Robust film cutting machine -Deep-drawing machine for films and molded parts -Brand new agitator tanks and storage tanks between 300 and 1500 liters with motor and control system -20-liter planetary mixer Dqvrtp -Powder mixer -And much more The attached images are just a few examples. -Various laboratory equipment -2x industrial fans: The larger one has a flow rate of ~88,000 m³/h, the smaller one 56,000 m³/h. The two fans are being sold on the base frame together with the corresponding 29 and 18.7 kW motors. -Heavy-duty Yale 3-ton ant -Brabender Technology bag chute -Other battery-specific laboratory equipment If you are interested in one or all of the devices, please simply arrange an on-site appointment!

Condition: reconditioned (used), Wire stitching machines Agrafix BX - see also BM5136 Cx2Gxjxtj - Wire stitching machine - Staple width 14mm - Block and saddle stitching (brochures) - Stapling up to 25mm / piercing up to 40mm SOLD - Speckbotel GFM - see also BM4860 - SOLD - Long arm cardboard stapler 500mm depth - Longitudinal & cross stitching - Solid cardboard 2-4mm thick SOLD - Nagel Multinak-S - see also BM4979 - SOLD - Double head stapler - Staples - Electric drive - Foot pedal - Stapling up to 25mm / piercing up to 40mm - Staple thickness 24 | 26 | 30 Eyeleting device HANG Piccolo III - see also BM5105 - Manual operation with automatic - eyelet feed. for eyelets with approx. - 5.5mm, punches and eyelets in one - operation, particularly suitable for lawyers, notaries

Condition: used, Details on request Drctav

Year of construction: 1991, Condition: used, Additional title: stainless steel tanks for wheat beer fermentation Dqof9F Total capacity (gross): 465 hl Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control

Year of construction: 2015, Condition: used, Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufacture 2015 Belt length 2,300 mm Width between the side parts 1.600 mm Belt width 1,200 mm Max. Load 1.500 kg Conveying speed 0.25 m/second Drive power 1.5 + 1.5 + 1, 5 + 2.2 + 30 kW Height of side panels 800 mm Blade lowering speed 70/40 mm/second Hydraulic pressure 160 bar Pneumatic pressure 6 bar Height of the system 5,700 mm Bale length dimensions min. 1,000 mm, max. 2,200 mm Bale width dimension min. 750 mm, max. 1,200 mm Bale height dimension min. 750 mm, max. 1,200 mm Material qualities provided OCC department stores' paper, mixed paper, punching waste, label waste, beverage cartons Wire diameter 3 - 4 mm Operating hours approx. 3,500 hours Cfv9Oe8H0I Throughput capacity approx. 50 bales/hour Total power consumption approx. 37 kW Control system Siemens S7-300 Operator panel Siemens HMI TPU1200 in 12". Wire reel for wire winding, pos. 4: Drive power 5,5 kW Pneumatic working pressure Condition of the baler The complete plant was used exclusively in trial operation for opening and de-wiring bales of pressed OCC paper and beverage cartons. After a short time, the project was discontinued and the system was no longer used. The conveyor technology and the bale opener and dewiring unit are really in a very good condition. As you can see from the pictures, there is almost no wear visible. The production line is ready for immediate use and available at short notice. The new price of the plant was 597.000,- €. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available in German language. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, knife: HW Z2 flight circle (ø): 130 mm drilling: 40 mm length: 30 mm Bvgg02Vqjm material: steel

Condition: used, color: other, Year of construction: 1999, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Oq2Tgeijjr

Condition: used, Lot of various discarded tools, machines, etc. Ideal for resellers or those starting a workshop. Flea market box. Various electrical machines, such as HolzHer 2424 belt sander with sanding frame, shadow groove saw, large Bosch router, hand-held circular saw, saber saw + Bosch drill, 2 small extraction systems Pneumatic grinder + pneumatic hoses Welder's safety helmets Mobile wooden tool box Brr8Gsxvy8 Mobile Dowidat tool trolley Tool boxes, tool cases Cable drums Nails, screws, various abrasives Paint rollers, mailbox, panel carrying handles 1250mm caliper And much more 2 large full mesh boxes Only sold as a lot, not individually. Sales are only possible to businesses. Price applies to all parts shown, of course without carts, pallets and folding boxes etc. The parts can be viewed on site by appointment. Pick up only, no shipping.

Condition: used, Roller conveyor, length,1500 mm - Working width 1300 mm - Overall width ~ 1.590 mm Ba89Fakztw - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 - Location, in stock

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Csjytsrmj3 Bioreactor capacity 2 x: 240 m3 Operation / Control: Siemens Simatic S7 Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Complete gluing plant, approx. 15 years Bvlj0Ivxqc Can only be sold as a complete system Disassembly/assembly/commissioning can be carried out all over the world

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. Draouh length: Miscellaneous diameter: Miscellaneous Shank: Miscellaneous mass: 12 kg Application: woodwork

Condition: new, Cantilever racking is ideal for storing long goods such as pipes, bars or plates. The uprights and profiles of our cantilever racks are made of particularly resilient, hot-formed IPE profiles. The racking rows are of any length and can be used on one or both sides. Cantilever racking is relatively easy to install and reconfigure. With the absence of actual shelving, adjusting the height and angle of the arms is simple and quick. This flexibility in shelving allows you to store a variety of loads. If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories 9Vohkxjfz as well as accessories and are happy to support you in your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: used, Roller conveyor length 1500 mm - Working width 1300 mm Dq3El2 - Overall width ~ 1.590 mm - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - without motor - Length 1.500 mm - Colour 7035, lichtgrau - Voltage / HZ 400 / 50 - Location, in stock

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33 Ale and 0.5l NRW disposable bottles are used. The system consists of the following machines/components: -New glass clearer Manufacturer: Kettner -Bottle filler Manufacturer: KHS -2 cap feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner Pallet binder Manufacturer: Born Pallet film wrapper: Manufacturer: Robopac Pallet labeling Manufacturer: Weber Marking Systems Additional title: one way bottles Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Ale and 0,5l NRW Dqoflf Features: New glass clearer; bottle filler; 2 closure feeders; bottle level control; labeler; label control; packer; palletizing system; pallet binder; pallet film wrapper; pallet labeling

Condition: used, New, unused and used dowel hole drills as shown. length: Miscellaneous diameter: Miscellaneous Shank: predominantly 10 mm mass: 4,7 kg Bn0Yocmaji

Condition: used, - Producer APP - Type GBT - Working width 1.300 mm - Working height 900 mm + - 20 mm - Length 2.750 mm Bdv087Xx - Belt control system - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW

Condition: used, - Year of construction: unknown - min. part length 320 mm - Max. part height 90-95 mm - number of levels 7 Stk. - distances between levels 100 mm Isweipi - insert depth 650 mm - number of vertical posts 300-450-450-300mm, 5 Stk. - overall height 1740 mm - Overall width 1.540 mm

Condition: used, - Working width 400 mm - Total width: 550 mm - Length: 2,750mm - Working height 860 mm + 50mm - Colour: RAL 7035 light grey Gxc3N33 - Belt strap - Location, in stock - Volt, Hz 400 / 50 - Motor power 0.09 kW - A frequency converter required by the customer - Used

Condition: used, - Length 3,000 mm - Working width 800mm - Roll width 870mm - Belt width 790mm - Webbing, green Urxgzvojux - Working height 900 + - 30 mm - For feed adjustment, customer-side one FU required - Location, in stock - Volt, HZ 400/50 - Used machine