Universal machining center

DMG DMU 50

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min Godszhxi Dopfx Abfouf spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device, handwheel Guedpszawmajfx Abfof only about 1.500 h

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. Gedpfxozmf R Eo Abfjuf • B-axis travel: -35° / +110° • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 42,253 hours (under power) / 21,241 hours (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Gjdpfx Aezl S Uzebfeuf Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, 5-AXIS Machining Center Brand: DMG MORI Type: DMU 50 Year: 2011 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 630 x 500 mm / 300 kg 13 kW spindle – 10,000 rpm Gusdpfxozgca De Abfef 16-position tool changer 3D probe 3D quickset Tool probe Coolant gun Electronic handwheel Chip conveyor Specifications: Table surface 630 x 500 mm X-axis travel 500 mm Y-axis travel 420 mm Z-axis travel 400 mm B-axis -5/+110° C-axis 360,000° Spindle speed 20 - 10,000 rpm Spindle power 13 KW Spindle taper SK 40 Rapid traverse XYZ 24 m/min Machine dimensions with chip conveyor 4670 x 2350 x H 2750 mm Approximate weight 4,680 kg

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMU 50 Evo linear Control: Heidenhain iTNC 530 Year: 2005 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 500 mm Y-Axis: 450 mm Z-Axis: 400 mm B-Axes: 108° C-Axis: 360° Gujdozi Dzhopfx Abfsf Rapid motion: (X/Y/Z): 80 / 50 / 50 m/min. Amount of controlled axes: 5 Spindle speeds: 18.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 NC-panning and rotary Table Table size: 500 x 380 mm Power consumption: 52 kVA KW Machine weight: 6,5 kg Req. space (LxBxH): 5,4 x 6,5 m Equipment No cooling through spindle No chip conveyor: Spänewanne Caliper Working mode: 4

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: Gedeziz S Dopfx Abfjuf • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 500 x 450 x 400mm, table size 630 x 500mm, table load 200 kgs, B axis -5/+110 degrees, C axis 360 (0.001 degrees), Guodpjzicmpofx Abfjf spindle speed 12,000rpm, spindle taper Iso 40, 30 station ATC, Siemens 840D control, swarf conveyor.

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor Gjdpfx Abszfx Ubsfsuf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Gusdpfox Rd Hpox Abfsf • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40