Profiling line with flying shear
Dreistern P3.100

Name: Dreistern P3.100
Brand: Dreistern
Availability: InStock

Condition

Used

Location

Saffig

Profiling line with flying shear Dreistern P3.100

Machine data

Machine type:: Profiling line with flying shear

Manufacturer:: Dreistern

Model:: P3.100

Condition:: used

Price & Location

Location:: Drieschweidenweg 10, 56648 Saffig, Deutschland

Call

Technical details

Sheet thickness steel (max.):: 2 mm

Total width:: 250 mm

Details about the offer

Listing ID:: A219-32813

Update:: 18.05.2026

Description

Profiling line Dreistern P3.100 with mobile cut-off unit and accessories

Machine bed features:
Production direction: right to left
Axle distance: 330 mm
48 stations
44 stations can be driven (44 gearboxes)
Quick-change plates
Mechanical quick-release clamps
Nlodpfx Asy Sm Eqokuob
Coolant piping
1 x 42 kW Baumüller motor
1 x 15 kW Baumüller motor

Profiling frame features:
Tool width per frame: 275 mm
Working shaft diameter: 50 mm
Working shaft connection: 30 mm with keyway
Fixed lower shaft (6 pieces with adjustable lower shaft)
Axial adjustment
Adjustment range of lower/upper shaft: 80 - 170 mm

Gearbox features:
Worm gear ratio 1:21
Lower/upper shaft gear ratio 1:1

Mobile cut-off unit features:
Travel distance: 1900 mm
Profile rail guidance
Ball screw drive
Bosch servo motor
Valve block with punching unit
Folding table length: 3000 mm
Emergency stop

Scope of delivery:
Machine bed with gearbox support
Infeed table
Measuring wheel unit, pneumatic
Straightening device
Strip filter unit 800 liters
Hydraulic unit for separator
44 gearboxes
44 profiling frames
2 Baumüller DC motors
66 universal joints

The system operated flawlessly in production until it was dismantled at the customer's facility.
Control system not included.

Strip unwinder and perforation unit are also available from us as used machines.
The system can also be easily extended with additional stations.

We can support you with the following when reassembling the system:
Planning
Mechanical overhaul
Control system construction
Painting
Safety concept
CE documentation

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2026

20 listings online

Call

Send inquiry

Telephone & Fax

+49 2625 ... show

These listings may also fit your interest.

Listing

Profiling scaffold, scaffold stand Dreistern P3.100

Saffig

7,744 km

Profiling scaffold, scaffold stand
DreisternP3.100

Call

Condition: used, Original profiling frames with quick-change plates for Dreistern P3.100 profiling machines Profiling frame features: Tool width of frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Nljdpsy Szgiofx Akusb Axial adjustment Adjustment range, top/bottom roller: 80 - 170 mm The following quantities are available: 44 pieces, fixed bottom shaft 4 pieces, adjustable bottom shaft Always mounted on 2 or 4 plates.

See details

Listing

Saffig

7,744 km

Roll forming line
DreisternP3.100

Call

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm Nlodpfey Sm A Aox Akusb 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

See details

Listing

Saffig

7,744 km

Roll forming line
DreisternP3.100

Call

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Nsdpey Sm Apefx Akujlb Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

See details