Rotary Vane Pump

Edwards E2M30

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Bk0Ccrwebt Any clarification, do not hesitate to contact us.

Condition: good (used), Edwards Treadlle Guillotine Model 416 T/G Capacity: 1.5 x 1270mm 16BG x 50” For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78544 Machine Serial Number: 635Y91120 Dqvlsb Cost: £950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Functionality: fully functional, Edwards E2M1.5 Vacuum Pump. This E2M1.5 two stage oil sealed rotary vane pump is specially designed to achieve ultimate vacuum and pump speeds, with quiet operation and a compact size. These pumps provide long-term reliability and have become the industry standard in a range of scientific and laboratory applications. The E2M1.5 vacuum pump also has a pressurized oil system that lubricates the bearing surfaces of the pump shaft and the sealing surfaces of the impeller. The pump has an oil distribution valve that prevents oil from flowing to the inside of the pump (suckback) after the pump stops. Ciqo7Rpcd0 Technical specifications: Voltage: 220-230V Power: 0.15kW Incl. exhaust filter Final vacuum with gas ballast: 1 x 10-2 mbar Dimensions (W) x (D) x (H): 35 x 20 x 25 cm Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 8 and RV 5 Motor: 230V Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire Yq8Cgs

Year of construction: 1995, Condition: good (used), Quality used 3metre x 6.5mm Edwards ve hydraulic powered sheet metal guillotine for sale Edwards v.e shear Max capacity 6.5mm x 3070 – 3metre Front operated powered back gauge Swissax Nc control Blade gap adjustment Additional set of new cutting blades Qbj2R Can be tested in our works under power with your sheet steel New guillotines in stock

Year of construction: 2021, Condition: used, Claw vacuum pump Dry Manufacturer: Edwards Type: EDC 150 V Suction capacity: 150 m³/h Ultimate pressure: approx. 50 mbar (abs.) Gyd7Ag

Year of construction: 1998, Condition: like new (used), Very high specification, elite model Edwards Pearson PR10 10 axis 4 metre x 150 ton CNC pressbrake for sale Make: Edwards Pearson / Bystronic Model: Elite model PR10 150/4100 free standing CNC Pressbrake Total axis 10axis / 8 axis back gauge – 10 axis including the powered lifting aids Mwvnr8Yr Year 1998 Capacity / bed size / tonnage: 4metre x 4100mm x 150ton Complete with: Powered front lifting aids Hemming table to manufacture flashings and safety edges up to 4metre lengths Cybelec Presscad 900 with new Lcd screen / display 6 axis back gauge Hydraulic tool clamping Crowning

Condition: excellent (used), Rotary vane vacuum pump Manufacturer: Edwards Type: E1M275 Dyjuc8L Included: Oil filling Status: very good (The pump is tested, cleaned and receives a new service before delivery) Warranty: 3 months

Year of construction: 2000, Condition: excellent (used), High quality 6axis Edwards Pearson PR4 6axis 4metre cnc pressbrake with integrated hemming table for sale Pr4 150/4100 Make: Edwards Pearson Dsadv3Xy Model: PR4 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 With hemming table for producing sheet metal flashings or safety edges on sheet metal Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 150ton Cnc control: Cybelec Cnc control Max stroke 215mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s We can quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Year of construction: 2016, Condition: as good as new (ex-display), Rotary vane vacuum pump Oil lubricated Manufacturer: Edwards Type: E2M28, E2M18 Included: Oil filling Status: Feed unit Warranty: 12 months Ubrxaqww Delivery time: after arrangement

Year of construction: 2000, Condition: good (used), High quality used Edwards Pearson pr6 7axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2000 Dl0Ygd 5 axis back gauge – z1, z2, x, x1 and r axis – 7axis in total – multi axis Taper finger / tapered finger Crowning Cybelec CNC control Machine in good working condition Fully serviced The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: good (used), Roots vacuum pump piston Manufacturer: Edwards Type: EH4200 Voltage: 50 Hz 400V Status: Rebuilt Buojvl3No Warranty: 12 months Includes: motor new storage, painting, electrical check

Condition: excellent (used), sheet thickness steel (max.): 10 mm, sheet thickness (max.): 10 mm, cutting length (max.): 3,100 mm, sheet width: 3,000 mm, worktable length: 3,000 mm, Used Very Clean Hydraulic Industrial Sheet Metal shear / Guillotine Edwards Pearson VE shear 3metre x 10mm in excellent used condition For Sale Capacity 3070mm x 10mm. Squaring Arms and Work Supports. Front operated Powered Back Gauge Serviced with Bystronic UK Complete with: Yqkgdeh Swissax 2000 control with automatic backstop blade gap adjustment and rake adjustment

Year of construction: 2003, Condition: good (used), Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2003 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Very late Pr machine before Bystronic made pressbrakes Complete with with: 2 new / recently fitted amplifiers – as per photo Tool clamps to take euro tooling Cybelec CNC Control with Colour Graphics: Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium Vvn8V3 New tooling to fold your products on this press available Can be seen working

Condition: excellent (used), Year of construction: 2002, High Quality, fully serviced and well maintained used Edwards Pearson pr6 cnc pressbrake for sale Edwards Pearson PR6 60 / 2550 CNC Pressbrake 2.5metre x 60ton / 2550mm New / Year 2002 4 axis back gauge – z1, z2, x and r axis – 6axis in total Xbb8Yy3K Cybelec DNC1200 Machine in good working condition including a good selection upper & lower Pressbrake tooling Serviced by Bystronic uk The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,000 mm, total width: 3,000 mm, sheet width: 3,000 mm, worktable width: 3,000 mm, table length: 3,000 mm, Equipment: finger protection, lighting, safety light barrier, Used Edwards Pearson 3metre x 6.5mm hydraulic sheet metal guillotine for sale EDWARDS PEARSON Model VR – 3000mm x 6.5mm Guillotine (2002) Model: VR6.5/3070 Hydraulic Variable Rake Programmable Back Gauge Auto Blade Gap Adjustment Front Supports & Squaring Arm Popular CYBELEC DNC 60 control Year 2002 Delivery and installation with operator training can be included Csiccm2T

Year of construction: 2001, Condition: good (used), Quality used Edwards Pearson pr6 cnc pressbrake for sale B93Nyrax9A Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2001 Hydraulic R upper clamping T5 Table 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec DNC1200 Machine in good working condition including a full length set of upper & lower Pressbrake tooling. Serviced by Bystronic uk Edwards Beyeler tooling P5R – R1 – 1030 full length top and bottom The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Year of construction: 2000, Condition: excellent (used), Used quality Edwards Pearson PR3 100 ton 3metre CNC hydraulic down stroke pressbrake for sale 3000mm / 3metre x 100 ton capacity press brake Make: Edwards Pearson Model: PR 3 100 / 3100 – popular PR model Cjfbntt3Tx Cybelec Modeva 1200 10 control New / Year 2000 Max stroke 215mm Max closing speed 200 mm/s 3axis: Y1,Y2,X Fully serviced Delivery and installation to your works can be arranged

Year of construction: 1997, Condition: good (used), Used quality Edwards Pearson PR3 150 ton CNC hydraulic down stroke pressbrake for sale 3000mm / 3metre x 150 ton capacity press brake Becev0A Make: Edwards Pearson Model: PR 3 150 / 3100 – popular PR model New / Year 1997 3axis: Y1,Y2,X Fully serviced Delivery and installation in your works available

Condition: good (used), Year of construction: 2000, High Quality, fully serviced and well maintained used Edwards Pearson pr4 cnc pressbrake for sale Elqj0Yge9 Edwards Pearson PR4 60 / 2550 CNC Pressbrake 2.5metre x 60ton / 2550mm New / Year 2000 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec DNC1200 Machine in good working condition including a good selection upper & lower Pressbrake tooling Serviced by Bystronic uk The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: excellent (used), Functionality: fully functional, pressing force: 320 t, bending length: 4,100 mm, working width: 4,100 mm, Used Edwards Pearson Bystronic PR10 8 axis 4 metre x 320 ton CNC pressbrake for sale Ucqfdztixb Edwards Pearson / Bystronic Model: PR10 320/4100 free standing CNC Pressbrake for sale 8axis / 8 axes: Y1 – Y2 – Z1 – Z2 – Z3 – X1 – X2 – X3 Year 1998 Complete with: Cybelec DNC900 that nas a new lcd screen fitted 6 axis back gauge Euro style upper and lower tool adapters

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, sheet thickness steel (max.): 13 mm, sheet thickness (max.): 13 mm, cutting length (max.): 3,100 mm, table width: 3,100 mm, cutting width (max.): 3,100 mm, worktable length: 3,100 mm, Used quality Edwards Pearson 3metre x 13mm hydraulic sheet metal guillotine High Quality used Edwards Pearson VR 13/3000 Hydraulic Shear For Sale New / year 2000 Fzjdirs Complete with front support arms and front operated back gauge / Cybelec DNC 10 control Rapid blade adjustment for thinner sheets Maximum material thickness 13mm x 3metre wide Fully serviced in good working condition Video Available upon request

Condition: used, Used guillotine / shear for sale with non ferrous falling sheet support Bk7Mq8Vu8Z Used guillotine / shear for sale with non ferrous falling sheet support EDWARDS PEARSON D.D 2500mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Control programmable / Front operated back gauge Datum Elgo control Back stop / back gauge Rapid blade gap adjustment Squaring arms Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Manufactured in England Current blades are in good condition however new blades are available at extra cost Delivery and installation available at extra cost Also 2metre, 3metre dd guillotines for sale. Also Keetona Hydraulic guillotines for sale

Year of construction: 2000, Condition: like new (used), Used Edward Pearson pr6 100ton x 4metre multi axis cnc pressbrake for sale Pr6 100/4100 Make: Edwards Pearson Model: PR 6 Pressure Reference Year / new: 2000 Total axis:6 – 4axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Bw0O7Sscqm Cnc control: Cybelec DNC 1200 PS/B Fully serviced with Bystronic uk – as attached per photo Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Year of construction: 2009, Condition: as good as new (ex-display), Quality used Bystronic Edwards Pearson 3.5/3000 DD guillotine for sale Late original Edwards Pearson DD 3000/3.5 Direct Drive Mechanical Shear Used high quality very accurate Edwards Pearson Bystronic 3metre x 3.5mm guillotine Qrc3P Complete with Siemens touch screen control New / Year 2009 Blade gap adjustment Front operated back gauge Brand new 2.5metre in stock