Hydraulic workshop press, broaching press, keyway broaching press, for broaching keyways in through

Eigenbau MaVo 5t-20

Hydraulic workshop press, keyway milling press, groove milling press
Hydraulic workshop press, custom-built, MaVo type 5t-20
Hsdowki Apopfx Ac Aefl
Used for milling keyway grooves in through-holes.
Pressing force: 5 tons (at 100 bar hydraulic pressure)
Stand width: 770 mm
Cylinder stroke: 220 mm
Distance from threaded piston rod to table traverse: max. 900 mm
Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec.
Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec.
Motor power: 5.5 kW
Mains connection: 400 volts, 50 Hz
- 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards)
- Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud)
- Threaded connection on the piston rod: M42 x 1.5 mm external thread
- 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread
- 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread
- 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length
- 2 support plates
- Very stable steel construction made of 140 series double T-beams
- Estimated load-bearing capacity of the steel construction: 40 tons or more
- Can be moved with a pallet truck
Space requirement L x W x H: 1200 x 930 x 2280 mm
Weight: 485 kg

The listing was translated automatically. Translation errors are possible.