2011 ENGEL DUO 4550/650
ENGEL DUO 4550/650

Name: ENGEL DUO 4550/650
Brand: ENGEL
Availability: InStock

Year of construction

2011

Condition

Used

Location

Belgium

2011 ENGEL DUO 4550/650 ENGEL DUO 4550/650

Show map

Machine data

Machine type:: 2011 ENGEL DUO 4550/650

Manufacturer:: ENGEL

Model:: DUO 4550/650

Year of construction:: 2011

Condition:: used

Price & Location

Location:: BELGIUM

Call

Details about the offer

Listing ID:: A200-54675

Reference number:: 00037

Update:: 23.09.2025

Description

Great opportunity to buy a 2-plate injection moulding machine ENGEL type DUO 4550/650 from 2011.

This machine is in very good condition with 51435 operating hours and equipped with robot arm marked ROBOT VIPER 40 - RC200 CONTROL and a volumetric mixing and dosing device for 3 components (manufacturer MICO MV - 1993). PS: robot cage is not included.

Full technical specifications in the attached document.

Viewing of the machine is possible upon appointment.

Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.
Control: CC200
Clamping force: 6500 kN
Opening force: 190 kN
Opening stroke: 1650 mm
Ejector force: 150kN
Ejector stroke: 210 mm
Mold height min.: 350 mm
Fodpsxfayxofx Aa Nspp
Mold height max.: 1000 mm
Tie bar diameter: 175 mm
Screw diameter: 90 mm
Screw stroke: 390 mm
Injection pressure: 1910 bar

Documents

20054675-01.pdf

Seller

Registered since: 2018

7 listings online

Call

Send inquiry

Telephone & Fax

+32 11 93... show

These listings may also fit your interest.

Listing

Hydraulic Injection Moulding Machine Engel DUO 4550/650

Belgium

7,562 km

Hydraulic Injection Moulding Machine
EngelDUO 4550/650

Call

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Fpodpoxd Iawofx Aa Nop Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

See details

Listing

Injection Moulding Machine Cronoplast Babyplast 6/10P

Germany

7,870 km

Injection Moulding Machine
CronoplastBabyplast 6/10P

Call

Year of construction: 2012, condition: ready for operation (used), Clamping force: 62.5kN, opening stroke: 110mm, ejector force: 6.4kN, ejector stroke: 60mm, platen distance: 119mm-229mm, mold carrier (fixed): 247mm/172mm, mold carrier (movable): 128mm/155mm, screw diameter: 12mm, injection volume: 6.8cm³, injection pressure: 1360bar. Machine dimensions X/Y/Z: approx. 700mm/1200mm/1650mm, weight: approx. 350kg. Documentation available. On-site inspection is possible. Fpsdpewyxa Njfx Aa Nsp

See details

Listing

Vertical Injection Moulding Machine ENGEL e-insert 740H/60 single-C

Berlin

7,943 km

Vertical Injection Moulding Machine
ENGELe-insert 740H/60 single-C

Call

Listing

Панагюрище

9,288 km

Injection molding machine
EngelES7050

€59,500

FCA ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. Fsdpfx Aaeickd Hs Njpp First and only owner since produced. The price is loaded on truck.

See details

Listing

Injection molding machine Engel CL 2550/550

Wrocław

8,235 km

Injection molding machine
EngelCL 2550/550

Call

Condition: like new (used), Year of construction: 2005, Injection moulding machine ENGEL CL 2550/550 Year of manufacture - 2005 Name of the robot-"ENGEL ERC53/1-F" Closing force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mold height [mm]-310 Max. mold height [mm]-800 Column spacing (mm)-915x860 Size of mounting plates (mm)-1345x1280 Ejector stroke (max) [mm]-250 Auger diameter [mm]-80 Fodpfeq Nybgjx Aa Nspp Injection weight [g]-1800 Oil quantity [liter]-1000 Injection sequence into the mold -2 Machine with robot ready to work Number of hydraulic cores S/R- 1/1

See details

Listing

Injection moulding machines up to 1000 KN BOY BOY 50 M, 1998

Pegnitz

8,025 km

Injection moulding machines up to 1000 KN
BOYBOY 50 M, 1998

Call

Listing

Engel DUO 4550/700 year 2004 Engel DUO 4550/700

Trenčianske Stankovce

8,453 km

Engel DUO 4550/700 year 2004
EngelDUO 4550/700

Call

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Fpodpfxjv U Dn No Aa Nep Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

See details

Listing

Engel DUO 4550/700 (2004) Engel DUO 4550/700

Trenčianske Stankovce

8,453 km

Engel DUO 4550/700 (2004)
EngelDUO 4550/700

Call

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm Fpjdpfxswnqk Nj Aa Nop 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E 22 Hotrunner 4 core pullers PC, ABS material

See details

Listing

Engel ES200/45VTHL-PRO-ELAST (2002) Engel ES200/45VTHL-PRO-ELAST

Trenčianske Stankovce

8,453 km

Engel ES200/45VTHL-PRO-ELAST (2002)
EngelES200/45VTHL-PRO-ELAST

Call

Listing

Injection molding machine ENGEL Engel ES 3550/600 HL

Halver

7,700 km

Injection molding machine
ENGELEngel ES 3550/600 HL

Call

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Fpedpoxu Hnbofx Aa Nep Ejector stroke: 250 mm Ejector force: 110 kN Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

See details

2011 ENGEL DUO 4550/650ENGEL DUO 4550/650

Machine data

Price & Location

Details about the offer

Description

Documents

Seller

Send inquiry

Telephone & Fax

2011 ENGEL DUO 4550/650
ENGEL DUO 4550/650