ER-USP 5

ENGEL

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, screw diameter: 45 mm, controller manufacturer: ENGEL, controller model: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Cgedpfxex Nr Tne Ah Iop Additional equipment • Tool heating: 32 control circuits, max. heating output 60 kW • Vacuum compressed air circuits: With Venturi nozzle and pressure switch • Solenoid air valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: Self-learning system for mold protection • Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% Machine Benefits Qualitative Machine Benefits • High precision and sensitive mold protection • Advanced control system with a 21. 5" full hd touch screen and user authorization system Technical Machine Benefits • Platen stroke: 1800 mm • Max. Platen distance: 2650 mm • Mold installation height: min. 850 mm, max. 1740 mm • High operational reliability with stable platen guidance and precise platen parallelism • Energy-efficient with reduced energy consumption and intelligent servo-hydraulics (engel ecodrive) • Multi-circuit hydraulics enabling parallel movements (ejector, core pull, nozzle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, clamping force: 400 kN, screw diameter: 18 mm, overall weight: 5,850 kg, controller manufacturer: ENGEL, controller model: n/a, This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits Cjdpfxsx D Nm Ej Ah Ijgp • Ejector travel: 105 mm • Nozzle travel: 380 mm • Turntable diameter: 1200 mm • Rotary table drive: hydraulic • Ejector drive: hydraulic • Connected load: 22 kw • Maximum opening 520mm /minimum opening 185mm Extra Information Machine still under power

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Cgedpfx Ahoyrdzuo Ijp

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz Cgsdpfxjyn Ntzs Ah Iop • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Cgedpfx Aheynzuke Isp Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2014, Engel - Injection moulding machine for silicone Insert 500V/100 Shuttle Cjdoynb Epspfx Ah Isgp Year of manufacture: 2014 Clamping force: 100 tons

Year of construction: 1996, condition: ready for operation (used), Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible. Csdpjynat Eefx Ah Iogp

Condition: excellent (used), Year of construction: 2010, operating hours: 43,775 h, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 1,300 bar, injection weight: 231 g, mold height (min.): 300 mm, Engel Victory 500/120 TECH injection molding machine (253) Equipped with an inverter – the drive motor is electronically controlled. Thanks to the inverter: -The speed of the injection molding machine screw can be smoothly adjusted. Cgodpeym Unujfx Ah Ijp -The machine uses less energy because the engine does not always run at full power. -Mechanical wear and noise are reduced. -Injection precision is improved, especially for complex details. Availability: in stock Year of production: 2010 Producer: Engel Screw diameter [mm]: 40 Injection weight [g]: 231 Injection pressure [bar]: 1300(2020) Closing force [kN]: 1200 Column spacing [mm]: without columns Plate size [mm]: 740×680 Min. mold height [mm]: 300 Control type: CC200 Tongue: English, German, Swedish Working hours [h]: 43775 Weight [kg]: 6800 Dimensions [mm]: 5000 x 1700 Robot socket: euro 67 Core string: 1x Control of heating for molds: 8x Air valve: 1x Feed hopper: NO

Condition: excellent (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Weight 12,000kg. PLEASE NOTE: Machine Must Be Off Site No Later Than 27th March 2026. Seller Can Assist With Decommissioning If Required. Codpfsym Az Nex Ah Iegp

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Due to a company relocation in the field of cleanroom injection molding, I have an ENGEL injection molding machine for sale with only 11,300 operating hours, in like-new condition. This is the last machine from a total inventory of 90 units. It was originally intended for another NYPRO facility but is now being made available for sale. Cgedpfx Ahowb Dl To Isp Attached you will find: • Recent photos of the machine • The order confirmation from ENGEL to NYPRO The original purchase price was approximately €330,000. The asking price is €85,500, including crane. I am happy to provide technical specifications upon request. If you are interested or have any questions, please feel free to contact me at any time.