DMLS 3D printer

EOS EOSINT M290 M 290 DMLS

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Iaodoxy R Ezepfx Ahzjw

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2021, We offer this Stratasys Fortus 450mc 3D printer in excellent condition, year of manufacture 2021. Iaedpsym Dl Nefx Ahzew If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Iasdjwpkcnopfx Ahzew Technical data may vary and errors in the description may occur and are subject to change.

Condition: good (used), functionality: fully functional, Year of construction: 2020, Machine is in good working condition. Iasdpey Dfpfsfx Ahzjw

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. New nozzle and new print bed just installed, ready for new owner. Isdpfevblu Dex Ahzoaw

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Isdpfx Aey Nk S Nehzeaw Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Iaedey Ug Ecepfx Ahzow Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,330 h, total height: 1,984 mm, total width: 1,270 mm, travel distance X-axis: 406 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 406 mm, product length (max.): 902 mm, number of axes: 3, This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details. • Supported / licensed materials installed on the system: ABS-ESD7, ABS-M30, ABS-M30i, ASA, Nylon 12, Nylon 12CF, PC, PC-ABS, PC-ISO, ST130, Antero 800NA, ULTEM 1010, ULTEM 9085 • Installed configuration with 2 print heads: one dedicated head for standard plastic materials and one dedicated head for carbon fiber materials • Support structure: Soluble or breakaway depending on model material • Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Iodpfx Aey R A Urshzjaw

Year of construction: 2022, operating hours: 8,755 h, condition: used, functionality: fully functional, machine/vehicle number: MPR00044, We are offering this used One Click Metal MPRINT+ One Click Metal OCM metal 3D printer, year 2022. Current list price is €175,000, including 2 build cassettes (1 heated up to 250°C). The machine is still operational and is being sold because we have purchased a larger build volume system. Asking price: €85,000. Isdpfey N Dzwex Ahzeaw Model: MPRINT+ and MPURE Serial number: MPR00044 Year of manufacture: 10/2022 Supply voltage: 230 VAC 50/60 Hz Fuse: 16 A Weight: 440 kg If you have any questions or require more information, feel free to contact us.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 475 h, total height: 2,410 mm, total width: 1,300 mm, overall weight: 2,300 kg, travel distance X-axis: 266 mm, travel distance Y-axis: 266 mm, travel distance Z-axis: 390 mm, controller manufacturer: SIEMENS, controller model: SIMATIC HMI, product length (max.): 2,800 mm, number of axes: 3, Metal 3D printer manufactured in 2021. This Eplus3D EP-M260 features a working area of 260 mm x 260 mm x 390 mm and a laser configuration of 1x 500 W. It has a maximum scanning speed of 8 m/s and a deposition rate of 15–35 cm³/h. If you are looking to get high-quality metal additive manufacturing capabilities, consider the Eplus3D EP-M260 machine we have for sale. Contact us for further details. Isdpfxezktg Nj Ahzsaw - Machine Type: Metal Powder Bed Fusion Machine- Working Area: 260 mm x 260 mm x 390 mm (W x D x H)- External Dimensions: 2800 mm x 1300 mm x 2410 mm (L x W x H)- Machine Hours: 475 h- Laser Configuration: 1x Laser, 500 W- Power Supply: AC 380V, 50Hz, 24A, 7.5kW- Max. Scanning Speed: 8 m/s- Deposition Rate (Single Laser): 15–35 cm³/h- Layer Thickness: 20 μm – 120 μm- Accuracy (< 100 mm build size): < ± 0.1 mm- Accuracy (≥ 100 mm build size): ± 0.1%- Gas Supply: Ar / N₂- Oxygen Content in Chamber: < 100 ppm- Compatible Materials: Titanium, Aluminum, Nickel-based alloys, Cobalt-chromium alloys, Tool steels, Stainless steels- Last Used Material: Aluminum powder (AlSi10Mg powder can be included)- Included Accessories:* E-Plus-3D ATEX-rated Industrial Vacuum Cleaner* 3B Additive MPS 5 Metal Powder Station (with Siemens SIMATIC HMI Touch Panel)* Pallet jack for system filter replacement* Various filters* Spare recoater blade