Surface Wet Grinding Machine

ERNST Neptun KS 1500

Condition: repair required (used), Year of construction: 2011, Operating hours: 18,231 h, Functionality: limited functionality, Machine/vehicle number: 12541, Working width: 1,500 mm, TECHNICAL DETAILS Working width: 1,500 mm Workpiece thickness: max. 100 mm Feed: adjustable with frequency converter Operating side: left Working height: 1000 mm constant Operating voltage: 400 V 50 Hz Infeed module Power distribution: 400 Volt Control voltage: 24 Volt Control panel: including PLC with color touch panel BUS system: CANopen max. part weight: 800 kg Deburring module (wet sanding process) Drive motor: 11 kW Abrasive dimensions: 1540 mm wide x 1540 mm long Max. Part weight: 800 kg Minimum part length: 350 mm Rotor module Rotation unit equipped with 8 shafts: Ø 350 mm x 460 mm long Motor drive per shaft pair: 4 kW Motor drive rotation unit: 1.5 kW Max. Part weight: 300 kg O32Yuzlsgr Outfeed module for wet grinding machines Max. part weight: 800 kg MACHINE DETAILS Machine weight: approx. 7000 kg Noise level: approx. 85 dBA max. rpm-1: 3200 Filling capacity: 35 kg Operating voltage 400 V 50 Hz

Condition: ready for operation (used), Year of construction: 2016, Operating hours: 10,035 h, Functionality: fully functional, Machine/vehicle number: 63-N-2016-0003, Working width: 1,500 mm, Grinding height: 100 mm, Grinding belt length: 1,540 mm, Grinding belt width: 1,540 mm, No minimum price - guaranteed sale at the highest bid! Deburring module, spin module and contact module TECHNICAL DETAILS Working width: 1,500 mm Material thickness: 0.8 - 100 mm adjustable Sanding belt dimensions: 1,540 x 1,540 mm Power: 20 kW Feed rate: 500 - 4,000 mm/min Gpcn30 Workpiece weight: max. 300 kg MACHINE DETAILS Weight: 5,600 kg Dimensions: 3,500 x 3,000 x 2,250 mm Power: 54 kW

Condition: ready for operation (used), Year of construction: 2014, Ernst Atlas ER/1500 sheet metal deburring machine Ccckru8 Year of manufacture: 11/2013 Condition: good Modules: - Infeed conveyor belt driven 2100mm - Atlas ER/1500 with infeed / deburring / rotor / outfeed - Turning device Rest see pictures

Condition: used, Year of construction: 2012, Functionality: fully functional, Machine/vehicle number: 630090, Power: 34 kW (46.23 HP), Power of feed motor: 400 W, Frequency: 50 Hz, For sale grinding machine in fully working condition. Effective working width 1,500 mm Workpiece thickness 0.8 - 100 mm Cehwun0Axm Feed rate 0.5 - 4 m/min Part weight max. 100 kg/m² Modules Deburring, brushing (spin), wet Wet processing coolant system with filter Vacuum one sided Magnetic table one sided Sound insulation available

Color: red, Year of construction: 2020, Operating hours: 464 h, Condition: used, General information Field of application: Construction Drivetrain Drive: Wheel Functional Lifting capacity: 1.500 kg Lift height: 3.000 cm History Number of owners: 1 Condition General condition: good Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Additional information Please contact Michael Overmeer for more information C93Bipy Bocker AHK 30/1500 KS trailer crane construction year 12-2020 with only 464 hours from the first owner. Machine is like new and has among other things: remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted. Pored

Condition: good (used), Recently Fully Refurbished Hu2W3H8 Engine No. ETS16G667C215, Specification V50-0, Type ETS16, HP: 1700, RPM: 750, AC Generator No. 310096, Type RP46BO Rating CRPO, KVA: 1500, Phase: 3-Phase, Cycles 50Hz, Amps 2090, Volts 415, RPM: 1,000, Class: E Insulation, Excitation 55 Volts, Amps 183, Brushes EG 98, Pressure Per Brush 3LBS

Year of construction: 1998, Condition: ready for operation (used), Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler. B809Qjoz90

Condition: new, -new- Robust and precise design with format- sliding carriage - The cast iron work table allows low-vibration work - Swiveling from -45° to 45°, extendable telescopic fence - Saw blade swiveling from 0° to 45° adjustable via hand wheel with scale - Saw blade height adjustment is made via a hand wheel - Large central suction connection-D. 100 mm - Saw blade hood with integrated suction connection D. 38 mm Technical data: Max. saw blade dia. 315 mm Max.-Cutting height 90°/45° 100/75 mm Cutting width with fence 940 mm Saw blade inclination 0-45° Table dimensions 350 x 760 mm Trimming length 1370 mm Table extension 350 x 500 mm Speed 4250 min/1 Motor power 400 V / 50 Hz 3,0 kW Exhaust port dia. top 40 mm suction port dia. bottom 100 mm weight 194 kg scope of supply: - sliding table with extension arm Rxk3J - trimming shoe - rip fence with round bar guide and fine adjustment - saw blade protection hood with suction hose . 590 0315 place of storage 97447 Gerolzhofen -free loaded-

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 2270mm veneer sanding device: no Oscillation: yes roller diameter: 38mm, 50mm, 76mm Sanding unit swivels: yes / 90° - 0° working table: 680mm x 310 mm Pbpct additional table: 260 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm x 2 Motor power: 1,5 kW / 400V Machine length: 1350 mm Machine width: 585 mm Weight: 162 kg

Condition: as good as new (ex-display), Year of construction: 2024, Action set KSO 1500 Wqzzibxl8 Item no. 5368150 instead of EUR plus VAT 2439,- only EUR plus VAT 1775,- Technical Data Sanding belt dimensions 2260 x 150 mm grinding surface 770 x 150 mm grinding belt speed 16 m/s cast table size 680 x 310 mm additional table size 260 x 260 mm Motor power 400 V / 50 Hz / P 2 1,5 kW (2,5 PS) Weight 162 kg dimensions 1350 x 585 x 1210 mm Suction nozzle diameter 2 x 100 mm Edge sanding machine with swiveling sanding unit, oscillating sanding belt and standard sanding belt device Infinitely adjustable sanding unit (0-90°) for vertical and horizontal sanding Oscillating sanding belt for better sanding results and longer sanding belt life Quick and easy change of sanding belt via quick clamping system Sanding sole with graphite coating as standard for a longer lifetime of the sanding belt Height-adjustable, robust work table made of cast iron with T-slot, supported by spring bearings Including lateral sanding sleeve device for sanding curves and radii Including infinitely adjustable miter fence Two suction nozzles Ø 100 mm Easy adjustment of the table height by spring bearings Infinitely variable swiveling sanding unit from 0-90 With locking at 0°/22,5°/ 45°/67,5°/90° Scope of delivery: Lateral sanding sleeve device for sanding curves and radii Infinitely adjustable miter fence Two suction nozzles Ø 100 mm Location: Ex stock 54634 B

Year of construction: 2022, Condition: new, Machine/vehicle number: 5368150, -Sanding unit infinitely adjustable at an angle (0 - 90°) for vertical and horizontal sanding. -Oscillating sanding belt for better sanding results and longer sanding belt life -Quick and easy sanding belt change via quick clamping system -Sanding soleplate with graphite coating as standard for a longer service life of the sanding belt Height-adjustable, robust work table made of cast iron with T-slot, supported by spring bearings -Easy adjustment of the table height by gas pressure springs -Incl. lateral sanding sleeve device for sanding curves and radii -Incl. infinitely adjustable miter fence -Two suction nozzles Ø 100 mm Equipment details Dl3Cvp -Sanding sleeve device incl. three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100mm), four table inserts and height-adjustable table with suction device -table insert with slots for optimal suction -stepless swiveling sanding unit from 0° - 90 -locking at 0°/22,5°/45°/67,5°/90° -With rubberized sanding roller and graphite coating on the sanding pad -Second emergency stop switch at the top of the sanding unit as standard -Variably inclinable sanding unit for various sanding operations, e.g. vertical and horizontal sanding Dimensions and weights Length approx. 1350 mm Width/depth approx. 585 mm Height approx. 1210 mm Weight approx. 162 kg Connection suction Suction port diameter 100 / 100 mm Work table(s) Longitudinal table length 680 mm Longitudinal table width 310 mm Height adjustment longitudinal table 130 mm Cross table height min. 920 mm Electrical data Input power 2,1 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Fuse protection 10 A Grinding unit Grinding belt length 2270 mm Grinding belt width 150 mm Belt speed(s) 16 m/s Grinding surface length 770 mm Grinding surface width 150 mm

Condition: used, Year of construction: 2011, Control Siemens 840 D sl max. workpiece length 800 mm swing diameter over slide rest 780 mm main spindle: max. turning speeds 3000 min/-1 spindle diameter in front bearing 180 mm spindle bore 92 mm spindle head A11 tool turret: tooling cassettes 2x 45 Stk. tool taper A11 DIN55026 tool diameter 700 mm feeds: rapid traverse 18 x 30 m/min weight of the machine ca. 24,0 t In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Umdabwavfx Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Due to the dimensions, the tanks are cut into pieces and welded by us at the customer's site. 720Uliodfq Height 4,30m, Lenght 11m The cyllinder is made of AISI316 steel, the upper and lower heads are made of duplex steel, but AISI316 steel can be ordered. Welding price is discussed separately. 2 units available. We also offer 300m3 with dimensions 6.40 x 11.5 m for the price of 72900€ and 2 units 500 m3 with dimensions 8x 11.50 m for 108900 €.

Year of construction: 2015, Condition: ready for operation (used), Connected load: 300VA, width: 1110mm, height: 2190mm. Myccilgh

Year of construction: 2015, Condition: ready for operation (used), Connected load: 300VA, weight: 170kg. Bx3Cv8K7Ob

Year of construction: 2015, Condition: ready for operation (used), Connected load: 250kVA, weight: 285kg. Dyjtke

Condition: ready for operation (used), Year of construction: 1970, Functionality: fully functional, Overall weight: 5,000 kg, For sale is a fully functioning Brucks 1500M , disk chipper for log splitting. The machine is in fully working condition with new feeder, chain head and knives. Maximum log diameter 27cm. Dnws0H

Mileage: 15,000 km, Power: 66 kW (89.73 HP), First registration: 09/1988, Overall weight: 3,430 kg, Fuel type: gasoline, Color: red, Next inspection (TÜV): 02/2025, Gearing type: mechanical, Year of construction: 1988, Condition: used, Total width: 2,020 mm, Total height: 2,450 mm, Number of seats: 6, 1st hand. German government vehicle. Very well-maintained and beautifully original vehicle from a small fire department in southern Germany. Problem-free 700 kilometer transfer journey on the freeway to us. TÜV a few kilometers ago NEW / valid until 02/2025. Can also be redone. "H-approval" as classic car - fire engine. The expert opinion according to §23 StVZO is available with a positive result. New timing belt, new ignition distributor and other new parts (all with invoice). The LT was serviced until 2018. In 2018 it got 4 new winter tires, new wheel brake cylinders and new brake shoes. This work can also be documented with the invoice from the local garage. Registration as "other vehicle fire engine portable fire pump TSF". The LT has a 2.4-liter petrol engine that runs well. The 4-speed manual gearbox shifts well. The top speed is 125 km/h. Sliding doors in the load compartment on the right and left. Bwnktghk8A A total of 6 seats, with seat belts at the front. Unladen weight 2090 kg. Permissible total weight 3430 kg. This means that the LT can be driven immediately with a German car driver's license. The LT still has residual load such as the original wooden ladder, which further emphasizes the contemporary character of the cubic VW Transporter. The conversion as a fire engine was made by ZIEGLER. Right down to the smallest detail, the vehicle still looks exactly as it did in 1988 when it was taken over from the local VW-Audi dealer. The LT has only ever been continuously registered to the first municipal owner as an emergency vehicle and has spent most of its life well protected in the garage. This offer is only valid for tradespeople or authorities. Subject to prior sale and erroneous information at any time. The following applies within Germany and the EU: Sales subject to differential taxation according to §25a UStG (=no separate VAT statement possible, gross = net). For exports to third countries, a deposit of 19% VAT is non-negotiable in addition to the stated purchase price until the buyer submits the final export documents to us. The 19% VAT will be refunded immediately after proper export.

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor - Belt conveyor - Cyclone - capacity: 50 m3/h Dpdpod

Condition: good (used), - Equipped with 3 knives - 90 kW motor - Capacity approx. 35 - 50 m3/h Bkgptkyn

Condition: new, - Neu - with schwenkbarem grinding aggregate oszillierendem abrasive belt and grinding sleeve unit - infinitely variable schrägverstellbares grinding aggregate (0-90°) for vertical and horizontales sanding - oszilierendes abrasive belt for besseright hand Schleifergebnisse and eine höheright hand durability des Schleifbandes -schneller and leichter Schleifbandwechsel Fcmfzgq about quick clamping system - grinding sole serial-production with graphite coat for eine höheright hand durability des Schleifbandes - höhenverstellbarer robuster working table aus Grauguss with T-Nut, gestützt durch Federlagerung - incl. lateral grinding sleeve-Einrichtung for sanding from Rundungen and radiuses - incl. infinitely variable verstellbarem mitre cutting guide - two suction nozzle D=100 mm Technische Daten: dimensions and Gewichte length (Produkt) ca.     1350 mm height (Produkt) ca.     1210 mm width/depth (Produkt) ca.     585 mm weight (Netto) ca.     162 kg Anschluss Absaugung suction nozzle diameter     100 / 100 mm working table(e) Längstisch length     680 mm height adjustment Längstisch     130 mm Längstisch width     310 mm Quertischhöhe min.     920 mm Elektrische Daten Anschlussspannung     400 V Netzfrequenz     50 Hz Phase(n)     3 Ph Aufnahmeleistung     2,1 kW Stromart     AC Elektrischer Anschluss Absicherung     10 A grinding aggregate Schleifbandlänge     2270 mm grinding surface length     770 mm Schleifbandbreite     150 mm grinding surface width     150 mm Bandumlaufgeschwindigkeit(en)     16 m/s No. 5368150

Condition: new, Year of construction: 2024, _____"Small" rear bucket with pendulum wall - . = HSHFLM151000V1500 mm / with three-point linkage / galvanized Features:" For transporting and tipping bulk goods, wood and organic materials" With three-point linkage Cat. II" Particularly robust construction" Fully galvanized design - long-term corrosion protection Technical details:" Very large capacity of 0.70 m³ (835 mm deep, 507/573 mm high)" Tipping angle: approx. 89°" Including hydraulic plugs and hoses" 1 double-acting hydraulic connection required" Dead weight: approx. 245 kgSimilar to illustration,storage location:HOF R9Mofmxasd

Condition: excellent (used), Year of construction: 2023, Saw band length: 14,850 mm, Saw band width: 80 mm, Total height: 3,440 mm, Total length: 7,500 mm, Total width: 2,150 mm, Cutting capacity: 1,500 mm, Cutting range round at 90°: 1,500 mm, Cutting width (max.): 1,600 mm, Power: 11 kW (14.96 HP), Technical Information Capacity (Round) 1500Ø Capacity (Lama) 1600mm Main Motor 11 kW Water Motor 0.09 kW Hydraulic Motor 1.5 kW Saw Size 80x1.6x14850 mm Saw Speed 20-80 m/min Machine Dimensions 2150x7500x3440 mm Standard Features HM Hydraulic vise SH Inverter lane speed control SVC Safety switches SG-02 Hydraulic strip tensioning Dpa0Bj VLF-01 Adjustable speed valve LNR Linear Take-off and Landing system TS Chip Conveyor MADE IN TURKEY

Condition: good (used), AMC Schou Model K-1500U Crankshaft Grinding Machine Serial number 22043-2011, Year 2011 Coolant tank, pump and swarf separator Beh88Lq Fitted with Newall DP7 DRO Swing Over Bed 27” Distance Between Centres 64”