Roundel Welding device

ESAB

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Tjdpfjy Aa Itjx Ahmsc Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC Tjdpovkiwbefx Ahmec MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp

Condition: new, welding current 10 - 180 A open-circuit voltage V connected load frequency 230 V Tsdpfx Ahjvkixfsmsc weight 6,8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Electrode cable Ground cable 4m Shoulder strap

Condition: used, table length 400 mm table width 400 mm table load 250 Kg table diameter 400 mm swivelling range 135 Grad turning speeds 0,2 - 3,0 stufenlos U/min total power requirement 0,3 kW weight of the machine ca. 0,115 t dimensions of the machine ca. 1,2 x 0,8 x 1,5 m Welding turntable with - footswitch - manual tilt/swivel - remote control - infinitely variable speed Tjdpfxsz Dkywj Ahmsc - machine base frame

Condition: used, Year of construction: 2008, total width: 2,400 mm, total height: 2,500 mm, total length: 8,000 mm, Colour: Grey Empty weight: 8.000 kg Track: 8000x4500mm Travel: 6000x2500mm Tsdpfx Ahez Aipqsmsc Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Offline software, Oxy-fuel cutting - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, Working table 12500x2500 Todpszracyjfx Ahmjc Plasma 3D Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Oxy cutting torches 2pcs . NB! 45 degree oxybevel is not working and needs repair. Uninstalling and installing is not included and has under the buyer's responsibility. Machine is available starting from now!

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Tjdpfx Aod N E Rvshmec Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, empty load weight: 10 kg, Voltage: 380 volts. Welding strength: 250 amperes. Weight: 10.5 kg. Multiple units in stock. The machines are used but in good working condition. Price: € 300,- excl. VAT Tjdpfx Ajzy D Nmshmoc

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. Tsdpfx Ahszxqa Asmsc The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 Tedpfx Aev Uragohmoc TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition