Center Lathe

EX-CELL-O

Condition: good (used), Functionality: fully functional, Specifications: Center width 2000 mm, Motor power 7.5 kW, Forkardt, two lynettes, digital display, Nolhcev Sy Tvedw Necp

Condition: good (used), Year of construction: 1964, TECHNICAL DATA Center height above bed 320 mm Swing diameter Ncjlhjg Rhn Dscdw Njp -over bed 650 mm -over cross slide 400 mm -over crank 700 mm width of crank (in front of headstock) 455 mm turning length 1250 mm Drive power 15 kW spindle head DIN 55022 size 8 spindle bore 81 mm Speed range 11.2 - 1120 rpm Gear stages 3 Number of speeds 19 Step jump 1,25 Tailstock - quill diameter 100 mm Tailstock - taper mounting MK 5 18 longitudinal feeds 0.02 - 1.6 mm/rev 18 face feeds 0,006 - 0,7 mm/rev 73 metric threads 0.4 - 112 mm Machine dimensions L x W x H 3.0 x 1.9 x 1.7 m Machine weight 3300 kg EQUIPMENT/ACCESSORIES 2-axis digital display (Z/x) FAGOR (new) Tailstock incl. 2 fixed centers Coolant device Chip and water trap Reducing sleeve metric 90 MK 5 Longitudinal and cross-cut fence Hydraulic copying device SAUTER Driving flange Face plate ø 600 mm Three-jaw chuck ø 315 incl. clamping jaw set Quick tool change system MULTIFIX size C 6 MULTIFIX cassettes Machine light Operating instructions

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available Noljurt Tljhcdw Necp ball groove milling for constant velocity joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t Nolhcdst Hw D Dew Nscp dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Ncjlhcdwed Nw Ttj Nep Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: ready for operation (used), Year of construction: 2004, operating hours: 37,961 h, General Data Measurements width 8260 mm Measurements depth 8260 mm Machine weight 2700 kg Control Unit Brand SIEMENS Model 840D Powerline Main Drive Spindle motor power 110 kW Tool taper HSK A100 Number of axis 4 Movement X-Axis Movement 1200 Nelhcdsv Eh Rvjw Nscp Y-Axis Movement 850 Z-Axis Movement 850 Table Outer length 800 mm Outer width 800 mm Media Chip conveyor Yes Additional Equipment Tool Places: Approximately 80 Machining Centre / Base Trough / Knoll Emulsion Coolant System Fixtures (HSK100A) without tools/measuring probes Pallets without table superstructures/clamping devices This 4-axis OSG EX-CELL-O XS425 was manufactured in 2004. A vertical machining centre, it offers robust capabilities for precision engineering. If you are looking to get high-quality milling capabilities, consider the OSG EX-CELL-O XS425 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Njlhcdwofnk Ehe Nscp Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, table length 1000 mm table width 1000 mm Njlhcdwogrndij Nscp table load / t weight 1100 kg table height 100 mm

Condition: used, Year of construction: 2001, Technical details: workpiece diameter: 38 mm workpiece length: 500 mm rack milling length - max.: 610 mm profile width: 92 mm module range: 0,3-1,3 slide stroke: 760 mm drive motor: kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 24 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves Nolhcdwsttxhaj Necp *

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 109 956, TECHNICAL DETAILS Control type: CNC Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length: max. 610 mm Profile width: 92 mm Module range: 0.3-1.3 Carriage stroke: 760 mm MACHINE DETAILS Ncelhcdwstmpqwo Nsp electr. version - voltage/frequency: 380/50 V/Hz Total power requirement: 24 kW Machine weight: approx. 10 t EQUIPMENT Complete cladding Tailstock hydraulic and oil system

Condition: used, Year of construction: 2016, Technical details: Ncsljudf Evehcdw Nop weight: 22 t

Condition: used, Year of construction: 1997, Technical details: workpiece diameter: 38 mm workpiece length: 500 mm rack milling length - max.: 610 mm profile width: 92 mm module range: 0,3-1,3 slide stroke: 760 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 24 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves * Ncslhcdotxdmdjw Njp

Condition: used, Year of construction: 2004, Technical details: workpiece diameter: 38 mm workpiece length: 500 mm Ncslsiwu Snohcdw Nep rack milling length - max.: 610 mm profile width: 92 mm module range: 0,3-1,3 slide stroke: 760 mm drive motor: kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 52 kW weight of the machine ca.: 10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves *

Condition: used, CTS Type: CW-50/8 Ex Water-cooled climatic test cell Type CW -50/8 Ex 1) C means: Climate 2) W means: Walk in 3) -50 means: lower temperature -50 °C 4) 8 means: 8m³ test chamber volume 5) Ex means: Test chamber in explosion-proof design according to EC Directive 94/9EG (ATEX 95) Temperature range: -50°C to +120°C Humidity range: 10 to 95% RH Dew point range: +5°C to +89°C Rated voltage: 400V 3/N 50Hz Rated power: 31.3 kW Rated current: 49.3 A Compressor: 4EC-4.2Y/4CC-6.2Y Refrigerant: R404A/R23 Technical performance data: Temperature tests: Temperature range -50 °C to+120 °C Temperature deviation ±0.5 to 1 K temporal ±2 K, spatial, with a wall distance of 100 mm Average rate of temperature change without test material and without heat radiation Measured in the supply air Heating: 1 K/min from -40°C to +80°C Cooling: 1 K/min from +80°C to -40°C Climate tests: Temperature range +10 °C to +95 °C Humidity range 10 % to 95 % rel. humidity without heat radiation in the dew point range +5 °C to +89 °C Temperature deviation ± 0.5 K in time Humidity deviation ±1 - ±3 % RH over time The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without heat compensation and without additional equipment. Dimensions: Test volume 8 m³ Test chamber dimensions: Width: approx. 1850 mm Depth: approx. 2200 mm Height: approx. 2000 mm External dimensions: Width: approx 2200 mm Depth: approx 4200 mm Height: approx 2600 mm Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, Ncslhot Ifztscdw Nop environmentally friendly refrigerant R 404 A/R23 Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Weight: approx. 3000 kg Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, machine/vehicle number: 42-0296, FP International Cell-O II air cushion machine: Practical table-top machine; produces air cushions on demand The machine works with ambient air, no compressed air is required. Perfect cushion packing system for storage and distribution. Electrical connection: 230V/ 4A / 0.85 KW Speed: 7 meters per minute Dimensions: Width 37.5 cm (58 cm incl. roll holder) Nslheq A Rxxjcdw Njcp Height: 44.5 cm (67.5 cm incl. roller holder) Weight: 30 kg

Condition: used, tool holder, tool holder, milling holder, milling tool Ncslhceu S Tcredw Njp -Manufacturer: Komet, Mount: SK50 -Type: AB 50x80x60 Ex CELL-0 -Dimensions: 95/90/H185 mm -Weight: 3.7 kg

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Ncoljnr E Enshcdw Njp Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Year of construction: 1995, Condition: ready for operation (used), A welding cell with Kuka robot is available. Robot: nominal payload: 30kg, max. payload: 36kg, reach: 2100mm, number of axes: 6, repeat accuracy: +/-0.06mm. Dalex welding machine: electrode force: 215-1290daN, rated power: 100kvA, throat depth: 250mm, stroke: 200mm, weight: 720kg. Ncjlhcdstxbz Sew Nep

Condition: used, Contact expansion block, safety relay -Type: PZE X4 24VDC 4n/o -Number: 76x shooters available -Price: per piece -Weight: 0.2 kg/piece Ncjlhcob N Ulqedw Nsp

Condition: used, Safety relay, safety controller, emergency stop switching device, switching device, safety sensor, contact extension, safety switching device, evaluation device -Manufacturer: pilz, safety relay, safety switching device, contact extension Ncolhjnbhlxocdw Nsp -Type: PZE X4P 24VDC 4n/o -ID no.: 774310 969987 -Number: 2x relay available -Price per piece -Dimension: 20/90/H120 mm -Weight: 0.2 kg/pc.

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an Automated Cell Culture Analyzer that measures up to 15 key cell culture attributes. By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor and operating costs compared to multiple instruments. The FLEX autosampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler was compared with data taken manually from the reactor and statistically analyzed. Specifications Sample analysis time: 2.5 minutes (gases only - PO 2 + PCO 2 ), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), relative operating temperature humidity range: 20-85 % Sample size: 1 ml (for all modules) Sampling options: Single via syringe/beaker Automated batch with sample tray with 20 positions Online, automated from up to ten bioreactors Electrical requirements: 90-264 VAC , 50 to 60 Hz (universal power supply) Ncjlhsq Tp Tdjcdw Nep System size: Height: 20 inches (50 cm) Width: 26 inches (66 cm) Depth: 20 inches (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without reagents Selection options in the modular test menu Chemistry/Gases Cell Density/Livability Osmolality IgG System integration options Online autosampler Sample collection system OPC connectivity Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture 2011 Nelopy Uzyjhcdw Nscp The plant consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with control panel MFT1 - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO type ISQ-MG - Spot welding head MIYACHI PECO type F160S - 25 mm stroke with Heidenhain measuring system - Connecting cable Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22KVA Welding current types: AC / DC Output power: max. 10 kA output frequency: 1 - 10 kHz welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone control panel removable) analog input: pressure sensor for proportional valve analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error control and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Displacement measuring system Heidenhain Welding unit with 5 pneumatic cylinders and valve terminal Festo type CPX Welding head mounted on horizontal guide rail and movable 20 mm via pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing available (2 pieces with 46mm stroke, 1 piece with 20mm stroke). Welding tip projection 300 mm Welding tip height above floor 315 mm dimension welding unit W x H x D 410 x 760 x 700 mm Weight welding unit 75 kg Total weight 100 kg 2 pieces almost identical available, price quotation per complete unit

Condition: used, Load cell, double bending beam load cell Nolhsd Al Hiecdw Nscp -Nominal load: 100 kg -Accuracy class: C3 -Cable length: 3 m -Material: stainless steel -Protection class: IP 68 -Dimensions: 39/120 mm -Own weight: 0.4 kg

Condition: used, Year of construction: 2002, operating hours: 12,300 h, Equipment: all wheel drive, OK MH 6.5 Year of construction 2002 !!!! ONLY 12300 h !!!! 1 hydr ditch cleaning bucket Claws - Stabilizers complete piping - hammer, grapple etc German machine Weight approx. 21 tons Tel: We are happy to take care of your financing or leasing Nolhcdwovrr Sws Njcp Sale EU: net after presentation of company documents and tax/VAT number VAT deposit 2000 ¤ we speek english govorimo srpsko-hrvatski our service for you: - Customs license plates - Export documents and EUR1 - Transportation worldwide - Overnight accommodation - Transfer from Munich airport or Passau train station Tel:

Condition: used, The Rhin-O-Tuff Onyx OD-4012 is a robust punching machine designed for high performance and ease of use. Manufactured by Rhin-O-Tuff Onyx, this model is located in Germany, with pricing available upon request. The machine allows for a tool change in just 20 seconds using two knurled screws. It features extremely durable punching tools with user-replaceable punches, enabling high punching performance while maintaining excellent user comfort. Two interchangeable punching tools are available. With a 3:1 division, the machine can punch up to 25 sheets of 80 g/m???? paper. Depending on the operator, it can achieve up to 80 punches per minute. Format: 0x0 Equipment: Ncelhsv A U U Nscdw Nop Punching tool change in 20 seconds with 2 knurled screws. Extremely robust punching tools, with operator-changeable punching dies, enable maximum punching performance while simultaneously offering very high operating comfort 2 interchangeable punching tools available. At a pitch of 3:1, up to 25 sheets of 80 g/qm2 can be punched. Up to a maximum of 80 punches per minute, depending on the operator.