Kieselguhr filter

FILTROX FOM 65/300

Year of construction: 1987, Condition: good (used), - Year of construction: 1987 Dpf7L2 - Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning - Dosing pump replaced in 2017 - Machine in good condition Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Condition: new, Year of construction: 2024, Load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Blt3Wo3Oysr Digital display with welding time limiter (if required)

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, Load capacity: 300 kg, Arm reach: 2,500 mm, Controller manufacturer: Kuka, Controller model: KRC-4, Equipment: Documentation/Manual, Kuka KR 300 R2500 industrial robot Ccctkd8 - refurbished and completely tested industrial robot - we can offer you a 6 month component guarantee separately - building year 2017 - control system Kuka KRC 4 - payload 300 kg - working range 2500 mm - complete with cable set and teach panel - good condition - test under power is possible - if you need more robots or other models, please contact us. - we always have many robots in stock We can offer you the complete installation of the robot into your production. Please contact us if you need more or other robots. We always have many robots of different manufacturers in our stock. We can teach your staff to program robots from Kuka, ABB or Fanuc.

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, Working width: 1,100 mm, Overall weight: 2,300 kg, Table width 110cm two sanding units, pneumatic sanding pad B2H7Xccqfm

Condition: good (used), Year of construction: 2014, Functionality: fully functional, BOARD SIZE：50 X 50 ~ 1,200 X 360mm Uyvf99Q9Uf Mounting Speed: 18,300 CPH components ranging: 0603(0201) ～ 33.5mm FEEDER INPUTS：Max.40 in case of 8mm tape

Condition: ready for operation (used), Technical characteristics Works with IDRACAM software Axis X, course 3550 mm Axis Y, course 1100 mm Axis Z, course 425 mm Electrospindle rotation : 0°/90°/180° Work capacity : Axis X = 3500 mm Axis Y = 540 mm with electrospindle in vertical position at 90° Axis Y = 460 mm with electrospindle in horizontal position 0° or 180° Axis Z = 300 mm with electrospindle in vertical position at 90° Axis Z = 250 mm with electrospindle in horizontal position 0° or 180° Ujo2Tfrnoj Axis displacement : Axis X : 80 m/mn, acceleration 2,8 m/s Axis Y : 25 m/mn, acceleration 2,8 m/s Axis Z : 25 m/mn, acceleration 2,8 m/s Spindle : ISO 30 DIN 69871 Power : 4 kW Rotation speed : 12000 tr/mn 6 tool holder charger tool changing time : 8 secondes Maximum tool weight : 5 kg Max tool diameter : 220 mm Air Pressure : 7 bars Machine at CE normatives Power and Motors Power: 7 Kw Overall dimensions Lenght: 5000 mm Width: 1785 mm Height: 2470 mm

Condition: used, Fraesdorn make SK 50 Length 300 mm diameter 20 mm Rqlpdy73B

Condition: good (used), Year of construction: 2003, Rapid traverse X-axis: 3,500 mm/min, Rapid traverse Y-axis: 985 mm/min, Rapid traverse Z-axis: 370 mm/min, The machine is in good technical condition. X axis = 3500mm Y axis = 985mm Z axis = 370mm Upli9Nefvn Working width of X axis = 3550mm Working width of Y axis (electric spindle at 90°) = 607mm Y-axis working width (electric spindle at 0°/180°) = 540mm / 607mm (ARGO 35 RM) Working width of Z axis (electric spindle at 90°) = 351mm X-axis rapid traverse: 28m/min Fast repositioning of Y-Z axis: 25m/min X-axis acceleration: 2.5m/sec 2 X-axis acceleration: 2.5m/sec 2 Five years ago, the original Italian control system was overhauled and replaced with a new control system from the Czech company MEFI, including a PLC Possibility of inspection in operation by prior arrangement.

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, Load capacity: 300 kg, Arm reach: 2,500 mm, Equipment: Documentation/Manual, Kuka KR 300 R2500 F ultra industrial robot - refurbished and completely tested industrial robot - we can offer you a 6 month component guarantee separately - building year 2012 Uymy2Du0J2 - control system Kuka KRC 4 - payload 300 kg - working range 2500 mm - complete with cable set and teach panel - good condition - test under power is possible - if you need more robots or other models, please contact us. - we always have many robots in stock We can offer you the complete installation of the robot into your production. Please contact us if you need more or other robots. We always have many robots of different manufacturers in our stock. We can teach your staff to program robots from Kuka, ABB or Fanuc.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, WORKING CENTER for aluminum / pvc FOM industries srl model SEGNO. - Good working machine used very little. - X axis stroke 2865 MM - Y axis stroke 321 MM - Z axis stroke 489 MM Axis slide : X-axis linear recirculating ball bearing slides Y - Z axis : ground round guides and ball sleeves. Axis movements : X axis : Helical rack and double pinion for backlash recovery. Y axis : Recirculating ball screw. Z axis : Recirculating ball screw with weight balance Rapid axis movements : X 48 m/min Rapid axis displacements : Y-Z 13.5 m/sec X-axis acceleration : 3.1 m/sec Y-Z axis acceleration : 1.1 m/sec ELECTROSPINDLE : - Electrospindle with forced-air cooling system - Inverter for rotation speed control - Impulse tool coolant system with coolant recovery system - Spindle taper ISO 30DIN 69871 - RPM adjustment range 0 - 12,000 rpm - Positioning time for rotation 0° / 90° - Total installed power 7KW - Operating air pressure 7 bar - Automatic tool change 5 tools (magazine) - Tool change time 7 sec. - Max tool diameter 130 mm - OMEGA 811 control Positioning accuracy : +/- : 0.1 mm X axis +/- : 0.1 mm Y axis +/- : 0.1 mm Z axis - 4 pneumatic vices with CNC-controlled positioning and pneumatic clamping - Pneumatic retractable stop - Automatic chip conveyor with conveyor - Full protection guard that can be opened penumatically Fzjfv9W Weight approx. 3300 kg Installation and operation manuals. CE compliant machine.

Condition: good (used), Year of construction: 2012, 4-axis machining center 8 Pneumatic clamps automatic positioning of clamps automatic toolchange usefull lenght 7000 mm Uod8Ypdw9H

Condition: ready for operation (used), Technical characteristics Blade diameter 450 mm Double left and right CN tilting 90° - 22/30° Stop ruller and entry and exit roller table Caractéristiques débitNumerical command Power and Motors Ujozxsginv Overall dimensions

Condition: good (used), Surface plate Dimensions 300 x 400 mm Ckrrrexe weight 32 kg in wooden case

Condition: used, Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm Beiwoka cutting length min. 420 mm cutting lenght max. 4000 mm Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - working width 40 – 300mm - material thickness 10 – 35mm - min. material length 270mm - max. material length without limits - max. feed speed 90m/min - feed speed smoothly adjusted on the inverter from the control panel - cutting speed 24m/min - milling machine engine power 2x4kW - milling machine rotational speed 7500 rpm - feed motor power 0.75kW - pneumatic pressure from the top and sides - spindle diameter 40mm - motor-driven introducing roller conveyor with a length of 1130 mm - manual / automatic control - PLC controller with touch screen for easy operation - compressed air connection 8 bar - diameter of the exhaust pipe 150mm - dimensions length/width/height 2550x1200x1400mm - weight 1100 kg ADVANTAGES – German production – O&M documentation Bcycacyv – tongue/groove profiling machine – set of cutters and heads included – motor-driven insertion roller conveyor – unpainted – used machine, very good condition Net price: PLN 107900 Net price: EUR 24523 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: good (used), Year of construction: 2007, With 4 controlled axes useful cutting length 4000 mm Iswb33Q electrospindle 4 kw 12000 rpm tool cone tool holder attachment Iso 30 tool magazine with 10 positions (tool cones and tools excluded) pendular machining kit on 2 islands 6 vices with automatic displacement

Year of construction: 2022, Condition: new, Cantilever rack NEW Data : - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 C93Akqm - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2214,00 € net + legally valid value added tax. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), Technical characteristics 2 knives per head Maximum profile height : 110 mm Maximum crimping knife height : 90 mm 3 vertical pressers Table width : 830 mm Aluminium table extensions Length : 1100 mm Foot pedal control Power and Motors Voltage: 400 V Pluging: Three-phased Ujovcr0L3D Overall dimensions

Condition: excellent (used), Bezel (28371) Center height 200mm diameter 65mm weight 9 kg S9Spn more data, see picture

Condition: good (used), We offer for sale a Heraeus UT 6200 in excellent condition Drying cabinet Ventilated oven with 2 shelves. Nominal temperature: 300 degrees. C., volume approx. 180 liters Power: 2800W. 1 phase 50Hz Sizes Interior 50x65x55 cm., housing: 72x84x89 cm. With Heraeus kelvitron controller - with continuous/timer function. Protection class: IP20 R80Nvyj9Av

Condition: excellent (used), Catalog number 7385 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - disc bore diameter 70mm top: - 3 rows of ratchets - smooth pressing, sliding shaft - shaft with saws - smooth pressure, slipping shaft from below: - slip roller - guide - pawls - track - 2 types of feed speed + smooth - main motor n22kW - feed motor 1kW - central lubrication - dimension of worktop length / width 1430x700mm - diameter of the suction nozzle 150mm - dimensions L/W/H 2300x1450x1750mm, weight 1550kg - made in Italy - very good condition - used multi-saw Net price: 25900 PLN Net price: 5886 EUR depending on the price 4,4 EUR (Prices may vary with higher fluctuations) Brsc2Rgrgq

Condition: good (used), Working range X : mm. 3550 mm Dpcyan Y-axis travel : 1100 mm Z axis stroke : 425 mm Electrospindles 1 HSD ISO 30 coupling - - max 18000 rpm Tool change positions 6 Work table No. 4 vices

Condition: ready for operation (used), Technical characteristics glass framing metal shoening assembly indexing rotating cross brace Vertical roller support Largeur de profils Max2500 mm Hauteur de profils Max2400 mm Inclinaison80 ° Nombre d'étaux2 Caractéristiques assemblageIntermediate supportPedal command Power and Motors Fzject8 Overall dimensions

Condition: good (used), Useful cutting length: 4000mm Max. blade diameter: 450mm Pneumatic head tilt: 90°/45° Dpcx9Z

Condition: ready for operation (used), Technical characteristics double copying pneumatical tightening Ujo3Q9G98T Power and Motors Overall dimensions