Vertical lathe

FKD 40 CNC

Condition: new, turning height: 2,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 5,400 mm, faceplate diameter: 4,000 mm, rapid traverse X-axis: 10 m/min, rotational speed (max.): 100 rpm, table load: 30,000 kg, travel distance X-axis: 5,500 mm, stroke length: 2,000 mm, power: 90 kW (122.37 HP), Vertical lathe FKD 40 CNC Fixed cross beam (not adjustable) Face plate diameter 4000mm turning diameter: 5400mm turning height: 2000mm Cross-section of the base: 400mm x 400mm X-axis: travel ±2750mm (=5500mm) Z-axis: travel 2000mm Kjdpfx Aksrknlkswjnb Speed of the faceplate: 0 - 100 rpm, manual gearbox Speed of the milling cutter: 0 - 3000 rpm, manual gearbox C-axis in the faceplate table Control: Siemens Max. centric load: 30t

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE (VTL) • Table Ø 3,200 mm • Maximum turning diameter Ø 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled RAMs • RAM travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure Kedpox Nhm Rjfx Akwsnb • Cooling system • Work light • Refrigerated electrical cabinet

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Kodpjxmd Snjfx Akwenb Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: new, Year of construction: 2022, functionality: unexamined, machine/vehicle number: 310122/11, type of input current: AC, overall weight: 1,850 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, space requirement width: 1,500 mm, space requirement length: 900 mm, space requirement height: 1,700 mm, input current: 909 A, type of output current: AC, output voltage: 20,000 V, Equipment: type plate available, We are selling our unused transformer. Kedpfx Aoy Nk E Aokwjnb Location of the transformer: 74017 Taranto Italy The stated price includes delivery within Italy and is negotiable. For deliveries outside of Italy, please request shipping costs separately.

Condition: used, Year of construction: 1995, functionality: fully functional, Technical data Control system Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Rotation diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Kedpfx Aju R Imlokwenb Horizontal table displacement 2,000 mm Cross beam Vertical adjustment of the cross beam in 100 mm steps 2,800 mm Crossbeam support (right) Horizontal adjustment of support - 1,800 to + 2,200 mm Vertical adjustment of the chisel slide 1,500 mm Cross-section of the chisel slide 240x240 mm Tool positions 20 pcs. Without vertical support (left) Lateral support (right) Vertical adjustment of support 2,800 mm Horizontal displacement of the chisel slide 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool changer Main drive: Power of the main motor 105 kW Speed range of the faceplate 0.4-90 rpm Maximum torque on the faceplate Drilling and routing drive Vertical support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Side support drilling and milling drive: Power of the drive motor 22.5 kW Maximum torque 900 Nm Connection values of the machine Machine connection voltage 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW

Condition: used, Year of construction: 1999, functionality: fully functional, 5 MVA oil-filled transformer, manufacturer Schneider, year of construction 1999, 20 ± 5% / 10 kV, connection group Yy0; was in operation until 07/2026. Knsdpfezr Ur Asx Akweb Equipped with an expansion tank, Buchholz relay, air dehumidifier, and dial thermometer.

Condition: used, Year of construction: 1987, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,000 mm, Technical data Siemens Sinumerik 840 DSL control system Main dimensions and travels Face plate diameter 3,500 mm Rotation diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Cross beam Vertical adjustment of the crossbeam in 50 steps 1,500 mm Crossbeam support (right) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool positions Cross beam support (left) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool changer without side support (right) Main drive: Power of the main motor 100 kW Speed range of the faceplate 1-100 rpm. Maximum torque on the face plate 100 kNm Drilling and milling drive vertical support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Without drilling and milling drive side support Total weight Connection values of the machine Ksdpfx Aju R D Tnokwonb Machine connection voltage 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW

Condition: used, functionality: fully functional, machine/vehicle number: 001661U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 6,300 kg capacity. Ref. 001661U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! We can supply our offered cranes, if desired, including: * Adjustments in length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment Kodpozildqefx Akwjnb * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001662U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 2 x 5,000 kg capacity. Ref. 001662U * Stored indoors * Technically 100% functional and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control Knjdpezilfhsfx Akwob * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001649U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001649U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes that we install are supplied with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and repainting if required * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists Knedpfezik Nxox Akwob * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.